3 8 shims for sale, brand-new and used.

1 Pafana Boring Bar Shank 1-1/2" Triangle 60° TCMT Boring Bar Style # SI-STUCR/L Right Hand Shank 1-1/2" Size # 24-03 Overall Length 12" Min Bore 0.845" Positive 60° Triangle Size 32.52 Negative 3° Side & End Cutting Angle Supplied With Pin & Clip Boring Bar Accepts Standard Screw On Type Carbide Inserts Size 32.52 Carbide Inserts & Shims : Sold Separatly Same Boring Bar Left Hand If Buyer Specify Aro

Thank You For Looking At Our Products Product Information:Indexable Face Milling Cutter Model GFSM4000-1500RSE42-6 Product Features & Specifications:3-7/8" Effective Diameter

Toolpost for Smithy family machines. The device will accept: 3/8, 1/2, 5/8 and 3/4 cutting tools.The assembly consist in: tool post, 3 sleeves and 3 shims. The cutting tools and chuck are not included.The shipping cost $6.45 - $12.73 varies by USA buyer's location.

Note: Xpresstooling announces that it will be named xpresstoolsinc effective immediately. The name and eBay site change is part of an ownership restructuring plan. We will continue to offer great quality tooling at affordable prices and maintain the highest level of customer service.

Steel Made, OXA Wedge Type Tool Post Set For 6" - 9" Mini Lathe

Note: Xpresstooling announces that it will be named xpresstoolsinc effective immediately. The name and eBay site change is part of an ownership restructuring plan. We will continue to offer great quality tooling at affordable prices and maintain the highest level of customer service.

DESCRIPTION: Tool Post and Tool Holders No. 1, No. 2, No.

10-15" QUICK CHANGE TOOL POST SET WEDGE TYPE BXA All working parts hardened and precision ground Maximum ridigity for chatter free performance No time wasted with shims Speed lathe operations 90% Completely sealed for maintenance free operations Takes only a few seconds to change tools 6PC SET INCLUDES:

Steel Made, OXA Wedge Type Tool Post Set For 6" - 9" Mini Lathe (4 PC Tool Holders)

NEW OPEN BOX NEVER USED SHARS Piston Quickly Changing Tool Posts 6-12" Lathes And Tool Holder Sets #100 AXA Fits Aloris, Doricn, Phase II, NEW Product Code: 202-9461 Product description #100 Set Lathe Swing: 6-12" Includes Tool Post and Tool Holders: 100 Tool Post, 101 Holder 102 Holder, 104 Holder, 107 Holder, 110 Holder Product features Increases production of lathe operations Change tools quickly and easily No time wasted with shims

These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”. They are also useful as bench blocks, shims, and set-up blocks.

These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.

200mm Or About 8" POLAND 3-Jaw Lathe Chuck D1-6 Mount, Marked PUUm-S 8D6ZD. No 4386 Used condition, I don't have a lathe this chuck will mount in. So I am unable to check the chuck for runout.

This is a lot of miscellaneous clamps, studs, t-nuts, and step blocks. I don't know much about these -- they came with a lot of equipment I bought and I have no use for them. They are dirty and have some surface rust so you will have to do a little clean up on them.

BROWN & SHARPE Ultra Precision Wavy Parallel Set - Model: 599-921-25 599-921-25 WAVY PARALLEL SET BROWN & SHARPE Applications

NEW 5” Machinist Cross slide drill press vise L FREE SHIPPING 50 STATES

NEW 6" 2 WAY MILLING VISE WITH CROSS SLIDE FOR DRILL PRESS L FREE SHIPPING LOWER 48 STATES This auction is a