+ Post new Ad
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 0
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 1
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 2
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 3
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 0
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 1
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 2
4 SMALL 3/8" X 3/8" X2-1/4" ARBOR PRESS PLATES, ANVIL WHEEL BARS, 1/2 to 1 TON, US $13.75 – Picture 3

4 Small 3/8" X 3/8" X2-1/4" Arbor Press Plates, Anvil Wheel Bars, 1/2 To 1 Ton

US $13.75

  • Victor, New York, United States
  • Jan 30th
Open on mobile:
QR code
  These bars were designed for use on our 1 Ton Palmgren arbor press where they easily support 2000 lbs. over the anvil wheel slot span of less than 1.25”.  They are also useful as bench blocks, shims, and set-up blocks.  Perhaps you could use a pair or more in  your shop.   Rated maximum yield strength of greater than 52000psi.  Common steel has yield strength of 20,000 psi.  These are deburred, degreased, pollished and ready to use.   You will receive 4 brand new bars.  Your bars are made from Prime Steel and may have visual surface marks that in no way impact the use to which they are intended.  Let us know how you like them or give us ideas for improvement. Shown here on our 4.5"  .5 ton anvil wheel ( anvil wheel not included) Shipped FREE right to your door. Always hassle free shopping.

Directions

Similar products from Supporting Blocks & Sets

Machinists 12/6A BUY NOW Iconic USA Starrett 154B Adjustable parallel

Machinists 12/6A BUY NOW Iconic USA Starrett 154B Adjustable parallel

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/6A BUY NOW Unused Spider for machinists and Gunsmiths

Machinists 12/6A BUY NOW Unused Spider for machinists and Gunsmiths

  • Lutz, Florida, United States
  • Jan 30th
SPi 98-410-4 4 6" Pairs 1" - 1-3/4" Parallel Set w/Case ** EXCELLENT **

SPi 98-410-4 4 6" Pairs 1" - 1-3/4" Parallel Set w/Case ** EXCELLENT **

  • Adkins, Texas, United States
  • Jan 30th
Machinist Tools Tool Precision Vee Block Pair Custom Made rare size.

Machinist Tools Tool Precision Vee Block Pair Custom Made rare size.

  • British Columbia, Canada
  • Jan 30th
KURT BRENDEL CLAMP WORKHOLDING PRECISION PRISM WORK HOLDER V-BLOCK MACHINE TOOL

KURT BRENDEL CLAMP WORKHOLDING PRECISION PRISM WORK HOLDER V-BLOCK MACHINE TOOL

  • Aurora, Ohio, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Starrett #129 Bench Block for Set Up Hold Down SAV

MACHINIST TOOLS LATHE MILL Starrett #129 Bench Block for Set Up Hold Down SAV

  • Morris Plains, New Jersey, United States
  • Jan 30th
IMPORT 285-2060 1-7/8 x 2-3/8 x 2" Aluminum 90 Degree V Block Set 1R

IMPORT 285-2060 1-7/8 x 2-3/8 x 2" Aluminum 90 Degree V Block Set 1R

  • Saint Louis, Missouri, United States
  • Jan 30th
MACHINIST LATHE MILL STARRETT # 567 V Block and Clamp in Box

MACHINIST LATHE MILL STARRETT # 567 V Block and Clamp in Box

  • Morris Plains, New Jersey, United States
  • Jan 30th
Starrett 119 Alloy Steel Bench Block, 4-7/8" Diameter, 1-1/2" Size

Starrett 119 Alloy Steel Bench Block, 4-7/8" Diameter, 1-1/2" Size

  • Lake Zurich, Illinois, United States
  • Jan 30th
1/8 X 4 INCH 10 PAIR PRECISION PARALLEL SET (3900-3002)

1/8 X 4 INCH 10 PAIR PRECISION PARALLEL SET (3900-3002)

  • Chino, California, United States
  • Jan 30th
4 SMALL 1/2" X 1/2" X 2-1/4" Arbor PRESS PLATES, Anvil Wheel Bars Blocks, 2 Ton

4 SMALL 1/2" X 1/2" X 2-1/4" Arbor PRESS PLATES, Anvil Wheel Bars Blocks, 2 Ton

  • Victor, New York, United States
  • Jan 30th
10" x 27" Steel Set-Up Blocks Pair

10" x 27" Steel Set-Up Blocks Pair

  • Euclid, Ohio, United States
  • Jan 30th
PRECISION MACHINIST MAGNETIC CHUCK UNIVERSAL V-BLOCK

PRECISION MACHINIST MAGNETIC CHUCK UNIVERSAL V-BLOCK

  • Jamestown, New York, United States
  • Jan 30th
MACHINIST LATHE MILL Starrett Parallel Blocks in Wood Case

MACHINIST LATHE MILL Starrett Parallel Blocks in Wood Case

  • Morris Plains, New Jersey, United States
  • Jan 30th
Ground Parallel Blocks 8" x 5" x 1.5" (Inv.31594)

Ground Parallel Blocks 8" x 5" x 1.5" (Inv.31594)

  • Portland, Connecticut, United States
  • Jan 30th
SUPER WEE VEE BLOCK SET, 91-288-1, Max. Cap. 1-1/2", V Angle 45° & 90°, /KJ4/

SUPER WEE VEE BLOCK SET, 91-288-1, Max. Cap. 1-1/2", V Angle 45° & 90°, /KJ4/

  • Saint Louis, Missouri, United States
  • Jan 30th
Starrett V-Blocks 568-C Block & Clamp (1 pair) matching EDP 52592 Mfg. USA

Starrett V-Blocks 568-C Block & Clamp (1 pair) matching EDP 52592 Mfg. USA

  • Fort Payne, Alabama, United States
  • Jan 30th
Precision 1-2-3 Block set by Pair. Brand New, Within 0.0001" Accuracy.

Precision 1-2-3 Block set by Pair. Brand New, Within 0.0001" Accuracy.

  • Ontario, California, United States
  • Jan 30th
SUBURBAN AB-HLF 1/2 DEGREE BLOCK

SUBURBAN AB-HLF 1/2 DEGREE BLOCK

  • Flushing, New York, United States
  • Jan 30th
VTG.. STARRETT TOOL POST HOLDER

VTG.. STARRETT TOOL POST HOLDER

  • Oak Lawn, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

Starrett 190C Extension Base For Little Giant No. 190, 1" Extension

Starrett 190C Extension Base For Little Giant No. 190, 1" Extension

  • USA, United States
  • Jun 4th
51.875" x 38" x 5.75" Steel Weld T-Slotted Table Cast iron Layout Plate Jig

51.875" x 38" x 5.75" Steel Weld T-Slotted Table Cast iron Layout Plate Jig

  • Grand Rapids, Michigan, United States
  • Jun 4th
37.75" x 24" x 3.5" Steel Weld T-Slotted Table Cast iron Layout Plate Jig Weld

37.75" x 24" x 3.5" Steel Weld T-Slotted Table Cast iron Layout Plate Jig Weld

  • Grand Rapids, Michigan, United States
  • Jun 4th
5pc MT1-MT5 MORSE TAPER LIVE CENTER CARBIDE BEARING

5pc MT1-MT5 MORSE TAPER LIVE CENTER CARBIDE BEARING

  • Garden Grove, California, United States
  • Jun 5th
(3) NEW QUALITY CARBIDE DEAD CENTER MORSE TAPER #2 LATHE CENTER

(3) NEW QUALITY CARBIDE DEAD CENTER MORSE TAPER #2 LATHE CENTER

  • Fenton, Michigan, United States
  • Jun 5th
MT1 & MT2 MORSE TAPER LIVE CENTER CARBIDE BEARING CNC

MT1 & MT2 MORSE TAPER LIVE CENTER CARBIDE BEARING CNC

  • Garden Grove, California, United States
  • Jun 5th
5c Collet Chuck

5c Collet Chuck

  • Huntsville, Texas, United States
  • Jun 7th
15pcs ER25 2mm-16mm Spring Collet Set Chuck Collet for CNC Milling Tool

15pcs ER25 2mm-16mm Spring Collet Set Chuck Collet for CNC Milling Tool

  • beijing, China
  • Jun 7th
13pcs 1-13mm ER20 CNC Carving Machine Milling Chuck Collets

13pcs 1-13mm ER20 CNC Carving Machine Milling Chuck Collets

  • beijing, China
  • Jun 7th
Vestil CPC-20 Heavy Duty Steel Vertical Plate Clamps with Chain, 0.8" Plate

Vestil CPC-20 Heavy Duty Steel Vertical Plate Clamps with Chain, 0.8" Plate

  • USA, United States
  • Jun 8th
Vestil HPC-20 Horizontal Plate Lifting Clamp, Steel, 13/16" Plate Thickness,

Vestil HPC-20 Horizontal Plate Lifting Clamp, Steel, 13/16" Plate Thickness,

  • USA, United States
  • Jun 8th
NEW LEYBOLD CLAMP 210042

NEW LEYBOLD CLAMP 210042

  • Clover, South Carolina, United States
  • Jun 8th
PBA 1023524 10' 3 JAW D-8 SCROLL CHUCK

PBA 1023524 10' 3 JAW D-8 SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
PBA 823523 8' 3 JAW D-6 SCROLL CHUCK

PBA 823523 8' 3 JAW D-6 SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
PBA 1023521 10' 3 JAW D-4 SCROLL CHUCK

PBA 1023521 10' 3 JAW D-4 SCROLL CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th
Kurt D675 Pecision Workholding Ironclad AngLock Vise

Kurt D675 Pecision Workholding Ironclad AngLock Vise

  • Hamlin, New York, United States
  • Jun 9th
MACHINIST LATHE MILL Machinist Wilton 4 1/2" Milling Drilling Vise

MACHINIST LATHE MILL Machinist Wilton 4 1/2" Milling Drilling Vise

  • Morris Plains, New Jersey, United States
  • Jun 9th
Palmgren 9611255 Angle vise w/base, 2.5"

Palmgren 9611255 Angle vise w/base, 2.5"

  • Wayland, Michigan, United States
  • Jun 9th
Art Impressions Die-Mouse Spinner

Art Impressions Die-Mouse Spinner

  • Hickory Hills, Illinois, United States
  • Jun 23rd
"Kaisercraft Dies-Ornate Charm & Chain 4.75""X1.25"""

"Kaisercraft Dies-Ornate Charm & Chain 4.75""X1.25"""

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Collegiate Frame 10"X10" W/6"X4" Photo Window-Auburn University

Collegiate Frame 10"X10" W/6"X4" Photo Window-Auburn University

  • Hickory Hills, Illinois, United States
  • Jun 23rd
Haas Hrt160 sp Rotary 17pin 4th Axis Indexer Milling VF0 VF2 VF Mini Mill Tm1 2

Haas Hrt160 sp Rotary 17pin 4th Axis Indexer Milling VF0 VF2 VF Mini Mill Tm1 2

  • Rolla, Missouri, United States
  • Nov 2nd
Troyke 15" Rotary Horizontal Table R-15 milling welding machining

Troyke 15" Rotary Horizontal Table R-15 milling welding machining

  • Lyons, Illinois, United States
  • Nov 2nd
GRIZZLY 12" Horizontal AND Vertical Rotary Table G9300 Milling Tool Yuasa

GRIZZLY 12" Horizontal AND Vertical Rotary Table G9300 Milling Tool Yuasa

  • Wilkes-Barre, Pennsylvania, United States
  • Nov 2nd
Steady Rest Turning Lathe 12" hole leblond makino lion okuma daewoo mori haas

Steady Rest Turning Lathe 12" hole leblond makino lion okuma daewoo mori haas

  • Newhall, California, United States
  • Nov 8th
6 pc Welders Chalk 5 1/2''

6 pc Welders Chalk 5 1/2''

  • Corsicana, Texas, United States
  • Nov 10th
SCHUNK 0203976 SDF GZB-S 1.250"/1.00"/63.5 COLLET SLEEVE

SCHUNK 0203976 SDF GZB-S 1.250"/1.00"/63.5 COLLET SLEEVE

  • Elkhart Lake, Wisconsin, United States
  • Nov 10th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies