3 inch test pipe for sale, brand-new and used.

Engineered Supply's 24-inch welded pipe roof anchor has a durable hot dipped galvanized finished. It is used for permanent application for fall protection, fall restraint, and suspended maintenance loads in any climate on structural steel and concrete with steel embedment plate structures. Made by certified welders in the United States, this plate anchor is built to meet and surpass building code allowable stresses.

Engineered Supply's 14-inch pipe roof anchor has a durable hot dipped galvanized finished. It is used for permanent application for fall protection, fall restraint, and suspended maintenance loads in any climate on concrete, structural steel, timber, and locally reinforced wood building structures. Made by certified welders in the United States, this plate anchor is built to meet and surpass building code allowable stresses.

Modified LF63 to ASA 4.25 Inch (2-5/8"ID) SS Pipe Inlet w/NW25 Nipple (3/4"ID)

PropertiesCOLOR: Off-WhiteAPPLICATION CONSISTENCY: Brush, spray, or palmAVERAGE WEIGHT/U.S. GALLON (ASTM D 1475):10.5 lbs. (1.26 kg/l)AVERAGE NON-VOLATILE (ASTM D 1644):41.5% by volumeCOVERAGE RANGE (FSTM 71):(Subject to the type of surface being coated.)Wet coverages shown below are for smooth non-poroussurfaces.

Up for auction is one Wheeler Rex soil pipe cutter model 3890, as pictured. This unit surplussed due to a tool shop upgrade. It is in good condition and the cutting wheels appear to be pretty sharp so my guess is that it has not seen much use.

DEWALT DW872 14-Inch Multi-Cutter Saw Multi-cutter offers versatility by cutting a wide variety of materials, including ferrous and non-ferrous metals Carbide-tipped blade allows the depth of cut to remain constant throughout blade life Cuts 4 times faster than chop saws, 8 times faster than portable band saws in 2-inch by 2-inch by 1/4-inch angle iron 14-inch 70-tooth carbide tipped blade delivers lower cost-per-cut compared to abrasive wheel cutting Specially d

TDS-100H-S1 Ultrasonic Flow Meter Flowmeter Clamp on Sensor (DN15-100mm)

TDS-100H-HS Ultrasonic Flow Meter Flowmeter Clamp on Sensor (DN15-100mm)

TDS-100H-HM Ultrasonic Flow Meter Flowmeter Clamp on Sensor (DN50-700mm)

TDS-100H-HM+HS Ultrasonic Flow Meter Flowmeter Clamp on Sensor (DN15-700mm)

TDS-100H-M2+S1 Ultrasonic Flow Meter Flowmeter Clamp on Sensor(DN15-700mm)

TDS-100H-M1 Ultrasonic Flow Meter Flowmeter Clamp on Sensor (DN50-700mm)

TDS-100H S1 Digital Handheld Ultr

Gas Leak Detector 18-Inch gooseneck small cramped areas Light in sensor cap shines the search area Audio and visual tic rate, adjustable, singe-hand operation, protective rubber boot Minimum detection 50-Ppm methane Product Description UEi Test Instruments designed the Combustible Gas Leak Detector to help detect combustible gas leaks in residential and small commercial areas. The sensor ensures a rapid response and the tic rate helps pinpoint the&