3 phase vacuum pump for sale, brand-new and used.

var itemNumber = window.ebayItemID ?

Process mixer Double arm Sigma Mixtruder extruder Vacuum 13gal Battaggion Used sigma type process kneading mixer/extruder in very good clean condition. This machine has dual sigma style mixing blades to mix the product and a screw type discharge screw to extrude the mixed material from the machine. The entire system consists of the main mixing machine, the control cabinet and the temperature control system.

HTML clipboard

Autoclave, Industrial, Lab Size R&D 330 psi and vacuum, 450 DEG F This is a used lab sized industrial autoclave that is vacuum and pressure rated up to 330 PSI at a temperature of 650 deg F. The system consists of a horizontal pressure vessel mounted on a stand and a vertical control cabinet which installs adjacent to the vessel. Chamber has front and rear swinging doors that are held shut with large T-bolts.

Complete with 2-stage vacuum pump and 120' of PVC pipes. Set for 401 cans, and was being used for coffee cans. Motor is Teco 3-phase induction motor.

ARNOLD EQUIPMENT COMPANY INVENTORY #7981 - 1 - NEW 3 liter working (4 liter total/1 liter minimum working) capacity laboratory Mixer Homogenizer Turbo Emulsifier manufactured by CMX Process Technologies/Axomatic. All product contact parts to be type 316L stainless steel, mirror polished. All elastomers (including mechanical seal "O" rings) to be FDA approved Viton.

ARNOLD EQUIPMENT COMPANY INVENTORY #7980 - 1 - NEW 5 liter working (7 liter total/1.5 liter minimum working) capacity laboratory Homogenizer Mixer Turbo Emulsifier manufactured by CMX Process Technologies/Axomatic. All product contact parts to be type 316L stainless steel, mirror polished. All elastomers (including mechanical seal "O" rings) to be FDA approved Viton.

ARNOLD EQUIPMENT COMPANY INVENTORY #7979 - 1 - NEW 10 liter working (12 liter total/3 liter minimum working) capacity laboratory Homogenizer Mixer Turbo Emulsifier manufactured by CMX Technologies/Axomatic. All product contact parts to be type 316L stainless steel, mirror polished. All elastomers (including mechanical seal "O" rings) to be FDA approved Viton.

12” H x 11” W x 28” D Vacuum Furnace Maximum Temperature:

11” H x 12” W x 28.75” D Vacuum Furnace Maximum Temperature:

GCF1700 series controlled atmosphere furnaces feature a chamber with alumina fiber insulation and MoSi2 heating elements. A double walled steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Shimaden 40-segment digital controller with built-in RS485 digital communications port and USB adaptor, allowing the user to connect to a PC for remote control and monitoring of the furnace.

About the commercial carpet cleaning unit itself: it is a Perma-Mount® 70 Truck-Mounted Carpet Cleaning Machine from Bane-Clene. This truckmounted car

Ross Factory Reconditioned LDM-4 Double Planetary Mixer SN# 45793-1 Capacities Mixing Range: 1 quart to 4 gallons (15 liters) Maximum Working Capacity: 4 gallons (15 liters) Full Capacity (mix can) 5.25 gallons (20 liters) General Features Air/Oil Hydraulic Lift with two-hand operation raise/lower air powered controls (80-100 psig air supply required, not included) Designed for vacuum operation up to 29.5"Hg (vacuum pump not included) Change Can design to allow t

CVC Products Inc., SC-4500 Thermal Evaporation Bell-jar System,

Feel free to contact me with any questions! This unit was used and maintained by a major biological company from 1992 to 2013. I'm told it was not used very much since the company mostly used Fermenters.