Note: we'll ship this item via express mail service to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg,
Items for auction is a Tektronix 2465B 400 Mhz Oscilloscope S\N B016333, Power cord, Top Probe/Manual Bag attached 1ea. Tektronix P6137 400Mhz Probe, Operators Manual #070-6860-00 Black BNC Input cables connected to channels 1 and 2 shown in pictures are not included. PLEASE READ ENTIRE LISTING AND REVIEW PICTURES CLOSELY.
You are biding on RF Directional Coupler Made by Triangle Microwave Inc. Part Number: CA-836 Frequency Range: 8.0 - 18.0 GHz Coupling: 6dB Flatness: ± 1.0 dB Insertion loss: < 1.0 dB Avg. Input power: 50W The test results match the spec
You are biding on RF Directional Coupler Made by MAC Technology Inc. Part Number: C3207-20 Frequency Range: 12.4 - 18 GHz Coupling: 20dB Flatness: ± 0.6 dB Insertion loss: < 0.8dB Avg. Input power: 50W The test results match the spec F
Type Tektronix B Plug-In UnitDon't have the means to test the item. The Item comes with a Full size Manual and A small introduction manual for the unit( The Tiny white manual in pictures) The Item is being sold as is.For parts or not working
This auction is for one (1) USED NARDA 3095 precision HIGH DIRECTIVITY directional coupler, 7 - 12.4 GHz. 1. Narda 3095 - 10 APC-7 , 7mm Precision High-Directivity Directional Coupler for precision measurements in the X-band ( 7 to 12.
All functions tested and verified No self test errors Operational and service manual included on CD Unit is very clean showing minimal use Specifications: Bands: The full range is covered in one continuous span. However, many specifications are dependent on carrier frequency. To simplify such specifications, the carrier frequency ranges are divided into bands as shown below: Band
This is a lot of high voltage insulators including a high voltage flexible shaft coupling. The shaft coupling is for a 1/4" shaft and appears to be new. It is missing one of the four set screws.
For Sale is a brass hex coupling. 3/4" FTP. We us them when repairing pipng on pressure washers, but they could be used in any 3/4" plumbing application.
ROD COUPLING NUTS OLD STOCK - MOST ALL HAVE BEEN USED 1-CLAYTON MARK 3/8" X 1/2" 11-7/16" X 1/2" 4-5/8" X ? 4-5/8" X 5/8" 4-1/2" X ? 10-MAYBE 3/8" X 3/8" 25- VINTAGE STYLE IN MANY MISC SIZES miscel
INSULATED 1/4" SHAFT COUPLER or COUPLING with 5kV BREAKDOWN VOLTAGE. This coupler is 3/4" long, 1/2" in diameter, has 4 setscrews and is made of ACETAL (DELRIN(R)). This material has a breakdown voltage of 450 Volts per thousandths of an inch, a surface resistance of over 1,000 MegOhms, a dielectric constant at 1MHz of 3.7 and an extremely low dissipation factor of 0.005.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.