US $299.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Clean used collets. Check the photos for the actual collets. We take close up photos!” |
Directions
Similar products from Metalworking Collets
3 Kennametal DA300 Collet Chucks # SS050DA304681 .500 diameter shank. 1 collet.
NICE Original Hardinge 1-5/8" Cone Collet 1-9/16", Threaded Lathe Grinder ID/OD
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-5/16", Threaded Lathe Grinder ID/OD
(4) Pieces Milling Chuck Collets, 3/4" OD x 2.18" Length, 1/4" 3/8" Mill
(3) Assorted 1-5/8" Cone Collets, 1-1/16", 1-5/64", 1-5/8" Lathe Grinder ID/OD
NICE Original Hardinge 1-5/8" Cone Collet 1-1/2", Threaded Lathe Grinder ID/OD
(5) Assorted 1-5/8" Cone Collets, Camco Ballas Morrison, Lathe Grinder ID/OD
CLEAN (6) Pieces Milling Collets, 2" Diameter x 3.5" Length, 1", 1-1/4", 1-1/2"
(8) Pieces Milling Chuck Collets, 1.25" OD x 2.75" L, 1/4 3/8 5/16 5/8 3/4 7/8
NICE Sheffer 1-5/8" Cone Collet Size, HEX 1-1/16", Threaded Lathe Grinder ID/OD
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-3/8", Threaded, Lathe Grinder ID/OD
(6) Pieces Milling Chuck Collets, 1" OD x 2.35" Length, 3/8" 1/2" 3/4" 7/8"
(4) Clean HARDINGE 5C SQUARE COLLETS ALL DIFFERENT LATHE GRINDER ID/OD HEX
(4) Hardinge 1-5/8" Cone Collet, S16 Removable Type Pad, Lathe Grinder, Britian
(16) 5C Collets, Brass Emergency and Step, Hardinge, 5DS, LATHE CNC
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck
7pc Lot South Bend 5C Round Collets USA
12 Pc ER20 Spring Collets Set Collet ER-20 ER 20 New
23 Pc ER40 Spring Collets Set Collet ER-40 ER 40 New
People who viewed this item also vieved
T Slotted Adjustable Angle Plate - 12" x 10" - HEAVY DUTY!
NOS SOUTH BEND USA LATHE 14L 16 FIXTURE FACE PLATE 12" # CL46MH - #PT46FHI
Lot - 8 PCS Lathe Drive Plate Machinist and Tool Holder Fixer Lathe South Bend
2 Pcs Quickly Holding U Shaped Bar 16mm Push Pull Toggle Clamp 301A 45Kg 99 Lbs
2 Pcs 163Kg 360 Lbs Plastic Coated Grip Latch Door Button Toggle Clamp CH-40323
Mill clampdown set 5/8" T-slot 1/2" studs
Heavy Duty Machinists Vise 1919-39
Heinrich Racine wis model 30A Vise 3568-115
Atlas Shaper Milling Vise Model No. S7-92 7443-68
JACOBS KEYLESS CHUCK ON SDS + PLUS SDS PLUS ARBOUR ADAPTOR 1/2" X 20 UNF USA
12 "1/16 X 90 Degree Steel Soft Jaw Set (3 pieses )
NEW NAKANE LS LIVE CENTER SUPER ACCURATE MT2
MACHINIST TOOLS LATHE MILL NICE NICE Machinist Live Center for Lathe
Lot of 12 1/4" WEDGELOCK Clecos
Taft Peirce Sine Block Model No.9119-10 W/ Wood Case
Machinist Material Hold Blocks
Palmgren Rotary Indexing Table, 5/8" T-Slots, 10" x 3-7/8", 34105 Never used
X,Y WITH ROTARY TABLE 60X60X60MM
15" Nikken CNC Trunion Rotary Table_4th / 5th Axis_5 Axis HMC VMC Index
20 Pc. Techniks CAT 40 ER 32-2.76" CNC Collet Chuck Kit- 18 x Collet Set, Wrench
Techniks SYIC-22225 CAT/ER Collet Chuck
Young Bros. Young Bros 09092 9 Piece Hand Cut Stamp Figure Set, Steel, 1/2"
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies