US $149.00
Condition | Used
:
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
|
Seller Notes | “Clean used collets. Check the photos for the actual collets. We take close up photos!” |
Directions
Similar products from Metalworking Collets
SEA TECH COLLET CLIP (QTY: 150) PART # 1147-15 BEIGE 5/8"
3 Kennametal DA300 Collet Chucks # SS050DA304681 .500 diameter shank. 1 collet.
NICE Original Hardinge 1-5/8" Cone Collet 1-9/16", Threaded Lathe Grinder ID/OD
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-5/16", Threaded Lathe Grinder ID/OD
(4) Pieces Milling Chuck Collets, 3/4" OD x 2.18" Length, 1/4" 3/8" Mill
(3) Assorted 1-5/8" Cone Collets, 1-1/16", 1-5/64", 1-5/8" Lathe Grinder ID/OD
NICE Original Hardinge 1-5/8" Cone Collet 1-1/2", Threaded Lathe Grinder ID/OD
(5) Assorted 1-5/8" Cone Collets, Camco Ballas Morrison, Lathe Grinder ID/OD
CLEAN (6) Pieces Milling Collets, 2" Diameter x 3.5" Length, 1", 1-1/4", 1-1/2"
(8) Pieces Milling Chuck Collets, 1.25" OD x 2.75" L, 1/4 3/8 5/16 5/8 3/4 7/8
(30) HARDINGE 21SC COLLETS 32nds 64ths LATHE GRINDER ID/OD Browne Sharpe
NICE Hardinge 1-5/8" Cone Collet Size, HEX 1-3/8", Threaded, Lathe Grinder ID/OD
(6) Pieces Milling Chuck Collets, 1" OD x 2.35" Length, 3/8" 1/2" 3/4" 7/8"
(4) Clean HARDINGE 5C SQUARE COLLETS ALL DIFFERENT LATHE GRINDER ID/OD HEX
(4) Hardinge 1-5/8" Cone Collet, S16 Removable Type Pad, Lathe Grinder, Britian
(16) 5C Collets, Brass Emergency and Step, Hardinge, 5DS, LATHE CNC
Pratt & Whitney 3AT Collets with Collet Closer and Four Jaw Chuck
7pc Lot South Bend 5C Round Collets USA
12 Pc ER20 Spring Collets Set Collet ER-20 ER 20 New
People who viewed this item also vieved
T Slotted Adjustable Angle Plate - 12" x 10" - HEAVY DUTY!
NOS SOUTH BEND USA LATHE 14L 16 FIXTURE FACE PLATE 12" # CL46MH - #PT46FHI
Lot - 8 PCS Lathe Drive Plate Machinist and Tool Holder Fixer Lathe South Bend
Quickly Holding Red Plastic Handle Latch Type Toggle Clamp 421 200Kg 441 Lbs
2 Pcs Quickly Holding U Shaped Bar 16mm Push Pull Toggle Clamp 301A 45Kg 99 Lbs
2 Pcs 163Kg 360 Lbs Plastic Coated Grip Latch Door Button Toggle Clamp CH-40323
Heavy Duty Machinists Vise 1919-39
Heinrich Racine wis model 30A Vise 3568-115
Atlas Shaper Milling Vise Model No. S7-92 7443-68
NEW! BISON 8" 4 JAW LATHE CHUCK W/ D1-5 BACK MOUNT
JACOBS KEYLESS CHUCK ON SDS + PLUS SDS PLUS ARBOUR ADAPTOR 1/2" X 20 UNF USA
NEW RITEN LIVE CENTER SUPER ACCURATE 20MM STRAIGHT SHANK E5289
NEW NAKANE LS LIVE CENTER SUPER ACCURATE MT2
4 piece LOT of 123 BLOCKS - Free Priority shipping !!
Machinist angle blocks 3 3/4" x 2" x 1 3/4" and 2 1/2" X 2" x 1 3/4"
Taft Peirce Sine Block Model No.9119-10 W/ Wood Case
Palmgren Rotary Indexing Table, 5/8" T-Slots, 10" x 3-7/8", 34105 Never used
X,Y WITH ROTARY TABLE 60X60X60MM
15" Nikken CNC Trunion Rotary Table_4th / 5th Axis_5 Axis HMC VMC Index
20 Pc Techniks CAT 40 ER 32-2.76" CNC Chuck Kit-18 x Coolant Collet Set,Wrench
20 Pc. Techniks CAT 40 ER 32-2.76" CNC Collet Chuck Kit- 18 x Collet Set, Wrench
Techniks SYIC-22225 CAT/ER Collet Chuck
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies