3200 2000 for sale, brand-new and used.

Item Description: This is corporate surplus in great condition. This is a standard 6 Ft ungrounded ac power cord. This is a 7a amp 125v volt power cord.

ONE SCHEMATIC ONE PRICE $3.99* FROM ANY MAKER Free 2D Boardview file if available TOO!

SKU:*flz-120514-011 2M420 is a cost effective, high performance bi-polar two phase micro-stepping drive applying pure-sinusoidal current control technique. It is best suited for the applications that desired extreme low noise and heat. It operates well in an environment, where electricity supply experience instability and fluctuation.

LOT OF SIX FERRONICS TOROIDS 11-761-K NICKEL ZINC FERRITE CERAMIC BEADS SPACERS BUSHINGS WASHERS CORES

Concepts Industrial

Concepts Industrial

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main

Overview The MA860H is a high performance microstepping driver based on pure-sinusoidal currentcontrol technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drivers in the markets. It is suitable for driving 2-phase and 4-phase hybrid stepping motors.

Key Features High performance, cost-effective Supply voltage up to 50DC Output current up to 4.5A Self-adjustment technology Pure-sinusoidal current control technology Pulse input frequency up to 300 KHz TTL compatible and optically isolated input Automatic idle-current reduction 16 selectable resolutions in decimal and binary, up to 51,200 steps/rev Suitable for 2-phase and 4-phase motors Support PUL/DIR and CW/CCW modes Short-voltage, over-voltage, over-current protections

Xinje 3 Phase Stepper Drive DP-508S-L DP-508S Up to 80VDC 5.0A 200Hz New

Xinje 2 Phase Stepper Drive DP504-L Up to 40VDC 5.0A 200Hz 200 Subdivision New

Leadshine 2 phase stepper motor 8.5NM 6.0A 86HS85+M542-05 2 phase stepper drive M542-05

Xinje 2 Phase Stepper Drive DP508A-L Up to 80VDC 5.0A 200Hz 200 Subdivision New

Xinje 3 Phase Stepper Drive DP-7022 Up to 220VAC 7.0A 200Hz 300 Subdivision New

Leadshine 2phase motor 4.5NM 3.0A 86HS45+M542-05 Leadshine 2phase stepper Driver M542-05

Xinje 3 Phase Stepper Drive Drive DP-7022C Up to 220VAC/336VDC 7.0A 200Hz New

Brand New High Performance NEMA23 Stepper Motor CNC Driver 2M542 4.2A Controller

what's in box? 1x 34HS5435B , 1600oz-in/3.5A dual shaft 4 lead wire 1 x DM860 24V-80V DC peak current 7.8A