40 hp motor for sale, brand-new and used.

Brand new in the box.

EM7045T 7.5//5HP, 3520//2930RPM, 3PH, 60//50HZ, 213T

STOCK PHOTO, PICTURE IS NOT ACTUAL ITEM EM3615T-8 5HP, 1750RPM, 3PH, 60HZ, 184T, 3642M, TEFC, F1

CEWDM3550 1.5HP, 3500RPM, 3PH, 60HZ, 56, C, 3528M, TENV, F

STOCK PHOTO, PICTURE IS NOT ACTUAL ITEM VEM31111 .75HP, 3450RPM, 3PH, 60HZ, 56C, 3416M, OPEN, F1

VL1306A .75HP, 3450RPM, 1PH, 60HZ, 56C, 3424L, OPEN, F1

STOCK PHOTO, PICTURE IS NOT ACTUAL ITEM VEM31120 1.5HP, 3490RPM, 3PH, 60HZ, 56

STOCK PHOTO, PICTURE IS NOT ACTUAL ITEM JEWDM3555 2 HP, 3450RPM, 3PH, 60HZ, 56J, 3526M, TEFC, F1, N

CEM7075T 3HP, 3450RPM, 3PH, 60HZ, 145TC, 3532M, XPFC, F1

EM7056T 15/20HP, 1465/1765RPM, 3PH, 50/60HZ, 256T

Gast Oil-less Piston Vacuum Pump & Compressor, 7HDE-10-M855X With a 1-Phase Marathon 2 HP 220 Volt Motor Compare to model: 7HDE-10-M850X (Motor: 110-220-240V @ 50 Hz)

Visi Dual Goat Complete Portable Milker 1 or 2 Goats Milk Machine InterPuls THIS SYSTEM HAS THE CAPABILITY OF MILKING 1 OR 2 GOATS AT A TIME THIS SYSTEM INCLUDES THE FOLLOWING:

TRIVAC D 40 BCS 3 HP Rotary Vane Vacuum Pump The TRIVAC BCS and its accessories: - CFS (chemical filter with safety isolation valve) – ARS (exhaust filter with lubricant return) – IGS (inert gas system) – LSS (limit switch system) and – EIS (electrical indicator system) make up the TRIVAC BCS system. In many applications the use of synthetic lubricants like perfluoropolyether (PFPE, NC 1/14 or HE-1600) offers superior characteristics compared to mineral oils.

UP FOR SALE GE MOTOR , HERE ARE THE SPECS : HP 1/5 Nameplate RPM 1075 Voltage 230 Full Load Amps 1.3 Service Factor 1.0 Hz 60 Bearings Sleeve Motor Thermal Protection

This MADE IN USA motor is fully functional. It has been cleaned and re-oiled. It has low hours as a fan motor.

This is a NOS AC motor, it has been in a box for many years. Works very nice. 110 volts, 1/40 hp, 1725 rpm, 5/16 diameter shaft.

3 phase 1 horsepower motor with slow start control box and switch. This setup is stock from Rockwell and came off an older Delta industrial lathe. Used but well cared for, tested and working great.

Emerson 1 HP Hazardous Location TEFC Motor 230 - 460 Volt / 3 Phase / 1745 RPM .875" Shaft CATALOG # X1S2BCR MSRP:$ 967.00