40 hp for sale, brand-new and used.

WEG high efficiency 3-ph motor NEMA Premium Efficient Motor, 3-Phase, 1 1/2 HP, Nameplate RPM 3430, Voltage 208-230/460, NEMA/IEC Frame 143T, Open Dripproof, 60 Hz, Full Load Amps 4.1-3.8/1.9, Inverter Duty, Service Factor 1.15, Nominal Efficiency 85.5, Base Mounting, Double-Shielded Ball Bearings, Thermal Protection None, CW/CCW Rotation, Insulation Class F, Ambient 40 C, Overall Length 12 1/16 In, Shaft Dia 7/8 In, Shaft Length 2 1/4 In, Frame Material Rolled Steel NEW!

up for sale general purpose motor , here are the specs : Motor Type

For Sale is One (1) USED EMERSON AC MOTOR MODEL# KS63YZCZK2715 SPEED 1725 RPM 1 HP 1-PH 115/230 VAC THERMALLY PROTECTED This has very light scratches shown in photos. What you see on the motor is sawdust. Motor is from 1973 and was use about ten times.

Testing Video, there is tape attached to the wheel to show movement: Model # C184T17DB39A Condition; NOS Tested Good. (This motor was a maintenance spare, never used.)

ABB metric motor 460V 3 phase 1 hp 3GVA082343-ASB New motor, broken motor mount, see picture. (replaceable). Technical Specs

Leeson Direct Current Permanent Magnet Motor 098155.00 C42D28NC5B 1HP Cat No.098155.00 / Model C42D28NC5B R.P.M. 3000 / Volts-120 / Amps-7.9 / Duty-Cont. /Frame-Vss560z Torque-21 / Encl.-Tenv / HP-1 / Type-DN / Ser.

~ Click to view larger images ~

Manuals for Vintage Test Equipment - HP Lambda Boontoon & more Take your pick from any of the manuals listed below. You'll receive the original manual, not a copy. Price is $10 each plus shipping & handling (see table).

Up for auction is a vintage audio oscillator made by hp model 200AB. Unit powers on. No further testing and therefore this instrument is being sold AS-IS.

All functions tested and verified No self test errors Operational and service manual included on CD Unit is very clean showing minimal use Specifications: Bands: The full range is covered in one continuous span. However, many specifications are dependent on carrier frequency. To simplify such specifications, the carrier frequency ranges are divided into bands as shown below: Band

In these bad economic times, get more “bang”, for your money with tested, working and calibrated test equipment from AAA Equipment Resources INC. I AM A WELL KNOWN SELLER AND BUYER OF ALL WORKING AND CALIBRATED TEST EQUIPMENT. WE OUR ONE OF EBAYS LARGEST INDEPENDENT PROVIDER OF GLOBAL CALIBRATED AND REPAIR TEST EQUIPMENT

Rental option as well for only 300$ a month. has 3 options. : 30 hz coverage, external mixing signal ID function and 2nd if output This is a 30 hz to 26.5 ghz hp spectrum analyzer , but with the optional mixers that can be supplied for 700$, you can achieve 50ghz + testing!

I have another unit for 400$ more w / OPTIONS 7 AND 8 which are 7: digitzed fast time domain sweeps useful for zero spans and high resolution bandwidth amplitude accuracy and faster sweeps 8: and signal ID for external mixing it isolates the true signal of the input and removes the spurious non wanted signals you get with external mixing..

I also have another 8560e for 800$ less that comes with a partial cal. everything measures dead on and works perfectly except the avg noise floor is about 1-2 db over spec on the high band (perfectly within spec on the 30 hz to 2.9 ghz range). if you need a good budget analyzer then ask about that one !

COMES WITH OPTION 7 : Digitized fast time domain sweeps (FAST ADC)aka faster zero span sweep This is a 30 hz to 6.5 ghz hp spectrum analyzer , but with the optional mixers from someone else, you can achieve 40ghz + testing! or even up to 110 ghz with other mixers this is a steal! you wont beat this price!

this unit goes up to 26.9 ghz thanks to the option 26 it has installed which is a very valuable and high demand option. it increases the signal to noise ratio and gives it about 7 db lower noise floor past 22 ghz. and the amplitude accuracy is dead on with the option.

(770) 253-6114 Search our eBay Store: