40 of 1750 for sale, brand-new and used.

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

Hytrol 24” x 25’ Long Powered Incline Case Conveyor Serial #488667 24” wide grip-rite black belt 28” wide frame 20’ Incline Length with 5' Long Infeed Conveyor 40" Infeed elevation (adjustable legs) 110" Discharge elevation (adjustable legs) 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Just removed from productionExcellent Condition !!

42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt SS Frame construction SS Legs with level adjusters 42" SS Wire Belt 10' Overall length 40" elevation – adjustableSS Drip Pan with drain1 Hp / 1750 rpm drive (Center drive) Electrical 208/230/460 Volt / 60 Hz / 3 PhaseJust Removed from a Major Food PlantVery Good Condition !!

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS

.shippingcalculator a { display:block; width: 208px; padding:177px 0px 10px 0p

(one) Hydraulic power pak , 10hp , 230/460 vac , 1750 rpm , tag on reservoir says 1500 psi , gage goes to 2000 psi , supply hoses look to be 1" . Thermal transfer heat exchanger model RM-24-22 , 300 psi , 350F , dial temperature gage , sight level gage with low level switch . Hydac filter housing with sensor switch , SQ D disconnect switch , enclosed on/off switch .

NEW OTHER BRONZE ITT- BELL & GOSSETT ALTERNATING CURRENT MOTOR. PN: M80050 A00 HP 1/6 RPM: 1750 PHASE: 3 HZ: 60 VOLTS: 208-230/460 AMP: .8-9/.45 40*C SF I, 3.5 SF AMP THERMAL PROT. NONE SHIPPING WITH FED EX WEIGHT: 35 LBS APPROX.

We are no longer a vender for Corken and we are now liquidating our Corken pump inventory. Please do not hesitate to send me an offer for one of our pumps. We have around 16 different pumps up for auction so, if this pump is not what you are looking for please feel free to message me on inventory inquires.

Up for sale is a Brand New Goulds WS5012D3 Submersible Sewage Pump 5 HP 230 Volts 5 HP 230 Volts 1750 RPM 1 Phase 26.5 Max Amps Up for sale is the Goulds WS_D3 series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

Up for sale is a Brand New Goulds WS3012D4 Submersible Sewage Pump 3 HP 230 Volts 1-1/2 HP 230 Volts 1750 RPM 1 Phase 7.00 Impeller 21.5 Max Amps Up for sale is the Goulds WS_D4 series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

Up for sale is a Brand New Goulds WS1012BF Submersible Sewage Pump 1 HP 230 Volts 1 HP230 Volts1 Phase1750 RPM5.75" Impeller Diameter 12.3 Max Amps Up for sale is the Goulds WS_BF series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

up for sale sewage pump , here are the specs : Type

[ Goulds WS3034D3 3 HP 460 V 54 ft 1750 RPM Submersible Sewage Pump

Warehouse Closing Down Sale! Retail Price: $820 DC Motor, Permanent Magnet, Totally Enclosed Fan-Cooled, 1 HP, 1725 Nameplate RPM, Voltage 180VDC, Full Load Amps 5.3NEMA/IEC Frame 56C, Mounting Face/Base, Thermal Protection None, H Insulation Class, Bearings Ball, Ambient Temperature 40 Degrees C, CW/CCW Rotation, Overall Length 16-5/8 In.Shaft Dia. 5/8 In., Shaft Length 1-7/8 In.RPM Range 1400-1800, Features Removable Base, UL Recognized (E47479) 180VDC Permanent Magnet Motors

Thousands of Used Metalworking and Plastic Machines & New Machine Tools Photos, Full Descriptions and Prices - Fast & Easy

36" DOALL VERTICAL BAND SAW THROAT CAPACITY - 36" WORK HEIGHT 13" BAND WIDTH 1/16"TO 1" BAND LENGTH 2 WHEEL - 122" BAND LENGTH 3 WHEEL - 166" TABLE SIZE 26 1/2 " X 33 1/2" AUXILIARY TABLE - REAR- 16 1/2 " BY 20" RIGHT TABLE TILTS - 45 DEGREE LEFT TABLE TILTS - 10 DEGREE LOW RANGE 50 TO 300 FPM HIGH RANGE 850 TO 5200 FPM ELECTRICS 3/60/240 MAIN MOTOR 3 HP AROUND 80"X 40"X 80" FLOOR SPACE WEIGHT APPROXIMATELY - 1750 - 1800

Bijur C2731 TM-1 Lubrication Pump 1 Pint (475 cc) 115 VAC 50 psi (new) Included in this listing: 1 Bijur C2731 TM-1 Lubrication Pump 1 Pint (new) Technical DataReservoir Capacity 1 pint (475 cc)