40 of 1750 for sale, brand-new and used.

NP0355 Waukesha Cherry-Burrell Model No. 006 Universal 2 Series Rotary Lobe Positive Displacement Pump Each item is guaranteed to be fully operational and in great condition unless otherwise noted. 316 Stainless Steel Universal II Pump with Gear Reducer and Motor.

Harbor Precise Industries Oil Chiller, HBO-250PTSB3 380~415V 50/60Hz

Hytrol 24” x 25’ Long Powered Incline Case Conveyor Serial #488667 24” wide grip-rite black belt 28” wide frame 20’ Incline Length with 5' Long Infeed Conveyor 40" Infeed elevation (adjustable legs) 110" Discharge elevation (adjustable legs) 1 Hp / 1750 rpm drive Electrical 230/460 Volt / 60 Hz / 3 Phase Just removed from productionExcellent Condition !!

42” W x 10' Long SS Conveyor with SS Wire Mesh Food Grade Belt SS Frame construction SS Legs with level adjusters 42" SS Wire Belt 10' Overall length 40" elevation – adjustableSS Drip Pan with drain1 Hp / 1750 rpm drive (Center drive) Electrical 208/230/460 Volt / 60 Hz / 3 PhaseJust Removed from a Major Food PlantVery Good Condition !!

Please contact us for additional information through ebay mail, or directly at:nrscientific@gmail.com (201) 592-1864. Mint Condition - Near New Swan-Matic C300 Cap Master with 302E Single Cycle Controller Mounted to

Accumulation Table, SS Conveyor, 40” x 106" Long, Sorting Packing Conveyorwith Speed controller Can also be used as a feed or pack table 40" wide x 106" long + 24" additional infeed lane (3) 12" wide belt (1) 3.25" wide belt SS Construction Rexnord Plastic belt Side rails - adjustable Adjustable leg levelers SS legs Casters for easy mobility 36” Elevation 1/2 HP / 1750 rpm drive Dart speed controller Electrical 115 Volt / 60 Hz / 1 Phase

36" Wide x 7' Long SS Incline Conveyor White Food Grade Plastic Belt, Conveying SS Wash Down Motor SS legs included - Removed for shipping purposes 36” wide White Food Grade Plastic Belting 40" infeed elevation 48” discharge elevation SS Wash Down Motor 2 HP / 1750 rpm Electrical 208/230/460 volt / 60 hz / 3 phaseRemoved from a Major Food Plant Excellent Condition !!

Consolidated SS Cap Elevator with SS Hopper, 12" Cleated Incline Conveyor Model FEH-15 Serial #729392 Incline conveyor is 12’ Long SS construction MS legs 12” wide cleated belt – some cleats are broken SS Hopper – 40” x 46” x 28” Deep with SS Top SS discharge chute 0.5 hp / 1750 rpm DC Motor Unit was last used for feeding plastic bottle caps Belt is showing signs of wear Last used in a water bottling plant Good Condition !! For More Information, EMAIL

2009 Hoppmann EP08 SS Cap Feeder with Speed Controller Model #EP08/08 Serial #003046 2009 Year of Mfg. Last running ROPP aluminum caps SS Construction 8” cleated belt, 2" cleats on 6" centers SS Hopper - 38" x 40" x 20" Deep Pivoting elevation 96" discharge elevation (adjustable) Low cap sensor Hinged access top on hopper SS

These units are in close to new condition!! They only have roughly 4 Months of use!!!! The company put on a new addition and needed to upgrade the size of the Pumps.

(one) Processing pump skid including 19" diameter , 22" high , slightly dished bottom , flat top . 3/4 " NPT port at bottom center with 316SS ball valve and 3/4 " NPT port at bottom side with fittings and ball valve . Tank drains directly into stainless steel centrifugal pump Finish Thompson , model AC4STS1V300B015 C05 , 1/3 hp , 115/230 vac , 1 phase , 1/2 " NPT outlet port .

This listing is for a Lightnin 205917 Mixer Motor, .43 HP, 90 Volts,1750 RPM, ID# 01KA513105 T4-ED This includes the following: Lightnin 205917 Mixer Motor, .43 HP, 90 Volts,1750 RPM, ID# 01KA513105T4-ED While is is new, there is some rust on the motor shaft as well as a few scratches on the outside case from transport. Information on the motor label: Lightnin P/N 205917 ID#: 01KA513105T4-ED HP: .43 Volts: 90

INDCO STAINLESS LAB MIXING STAND & SHARPE MIXERS D-050 51" WIDE 98" MAX HEIGHT

1000 Gallon Stainless Steel Tank with 10 HP Mixer Tank Height - 72" Tank Diameter - 64" Total height - 132" Motor Specs 3 Phase 230/460V Motor HP - 10 US Gear Motor Series 2000 Ratio 40-1 Input rpm 1750 Output torque 13,620 in/lbs US Gear Motor S/N F10K-2458864-0 Weight for shipping is approx&nb

NO RESERVE!!!!! EXCELLANT!! GUARANTEED!!

Hypertherm Powermax 85 Plasma Cutting System with 25' hand torch P/N 087108 Hypertherm factory refurbished Powermax 85 plasma cutting system in near new condition - comes with Hypertherm 3 year warranty on the power source. Exactly the same machine as new models - cuts up to 1.25" thick material at 10 inches per minute. Operates on 200 to 480/600v single or 3phase 50/60hz power - certified to CSA standards.

10" Direct Drive Bench Top Disc Sand 3/4 HP, 1750 RPM direct drive 1-3/8" dust collection port Cast iron base and housing for stability Aluminum table adjusts 0-45° Fully shielded radial bearings Includes miter gauge Motor: 120V, 60 Hz, single phase, 13.4 peak amps, fan cooled Two mounting holes: 8mm

This listing is for a Marunaka Royal 10 surfacer. It is used as a powered hand plane with an adjustable skew cut. Used to cut fine-figured hardwoods that are prone to tear-out.