5 8 pulley for sale, brand-new and used.

2005UD6G.68 New Sanyo Denki, Ball Bearing, 2 Phase 42MM Square (1.65 inch sq.), 5.3 OHM, 1.8 Degree Step (200 Steps per Revolution), Stepper / Stepping Motors, Part Number 103H5208-10U41. Each bid quantity is for One (1) Motor. You may bid / buy any number, up to the total quantity available above.

DREAM. DESIGN. BUILD.

This Sale Is For A Laboratory Surplus Robotics Twin Belt Idler Pulley Bearing Block Assembly Mount For Automation. The Pin At The Base Is 10mm In Diameter And At The Top 1/2" In Diameter. It Is About 2 5/8" Long From The Top Of The Clip To The Top Of The Shaft.

Buhler Permanent Magnet 24 V DC Large Hobby Motor with Pulley - 5000 RPM New motor manufactured by Buhler Nominal voltage: 24 V DC Voltage range: 3 - 24 VDC No load speed at 24 VDC: 5,000 RPM No load current: 210 mA Starting current: 12.8 A Can be operated in either direction: Simply reverse polarity of power supply Shaft dimensions: 11 mm Long x 6 mm Diameter Comes with a shaft mounted pulley: 11 mm Long x 10 mm Diameter Dimensions (not including shaft): 103 mm Long x 52 mm Diameter

This auction is for one 2 HP Electric Doerr Motor, Model # LR22132, RPM 3450, 12 AMPS, 230 LO Volts (can be converted to 115 volts), 1 Phase, HZ-60, FR-H56, CODE-J, DUTY-CONT, INS CLASS-BR, MAX. AMB.-40, 5/8" shaft. This motor was used very little.

Please READ EVERYTHING BEFORE bidding. This auction is for; 1 - Congress Drives Division, Acme Precision Products, Inc. - Congress Standarized Pulley.

3 Step PULLEY 3/4" Shaft 4"

NEW MARTIN GEARBELT PULLEY SPROCKET W/TAPERLOCK BUSHING MODEL P48-8M-50-SD a.imagelink {color:#8282fb;} a:hover.imagelink {color:#8282fb;} a:visited.imagelink {color:#0070f3;} a.imagelink img.auctionimage {

This is a 3" Pot Metal or alloy Motor Pulley with a 1/2" diameter bore takes 1/2" wide belts. It mounts with a set screw that is inside the pulley (under the belt) . The pulley is about 5/8 " thick.

This is a 3" Pot Metal or alloy Motor Pulley with a 5/8" diameter bore takes 1/2" wide belts. It mounts with a set screw and take 1/2" wide belts. It has an insert that can be inserted--the insert has a 6 sided "nut" opening 3/4" across internal.

NEW MIKI PULLEY SPRFLEX COMPLETE COUPLING MODEL AL-090 a.imagelink {color:#8282fb;} a:hover.imagelink {color:#8282fb;} a:visited.imagelink {color:#0070f3;} a.imagelink img.auctionimage { border: 2px solid #8282fb; } a:visited.imagelink

This item is a vintage cast steel (aluminum?) motor pulley wheel. 5/8" thick, 1/2" diameter bore hole and 3" wide. Unstamped.

This is a Browning BK36x5/8 Pulley. It has a 5/8 inch bore. One groove.

You are viewing a Browning 2AK25 pulley. This item is in good to very good condition. These sizes are approximate: 7/8 bore 3/16 keyway 2.5 inch diameter

You are bidding on (1) new in box T.B. Woods 3.35 diameter V-belt pulley/sheave #BK3234 ...... 3/4 shaft ....