8 inch hydraulic cylinder for sale, brand-new and used.

HANNA 1 1/2" BORE 4 1/2" STROKE HYDRAULIC CYLINDER MS2 3ANNC 1.50 4.50 DAF1G This is a brand new Hanna Hydraulic Cylinder with bottom mount, Part# MS2 3ANNC 1.50 4.50 DAF1G with swivel coupler. This heavy-duty cylinder has a 1 1/2 Inch Bore with a 4 1/2 Inches stroke with a 5/8 " piston with a male thread. The new cost of this cylinder is over $700.

This is a Auction for a Brand New Pneumatic Jergens Single Acting Air/Oil power Clamp Cylinder, Model # CYL-07A, Part No. 60301 with 1 inch of stroke and a 3/8 Inch piston with internal thread. These single-acting, spring-return cylinders will operate on air or oil; all have a 1" stroke.

1995I1A.1.70 New Braze / Weld Hydraulic Fittings, Part Number and Manufacturer Unknown. Each bid quantity is for a Lot of Four (4) Fittings. You may bid / buy any number of lots, up to the total quantity available above.

This is a Prince Hydraulic cylinder. There is not a model number on the part so I don't have all the catalog information. The part is 17 1/4 inches overall in length.

Miller's Woodcutting 3pt Log Grapple Make your own hydraulically operated log grapple to mount off of a tractor's category 1 3pt Hitch. The tractor will need one set of hydraulic remotes to operate the grapple cylinder. Pick up and place logs without ever leaving the tractor seat.

Speeco Two Stage 16 GPM Hydraulic Pump, Designed for log splitters High Strength Cast Iron Body, 16 gpm at 3600rpm, Drive required 8 hp, suggested Cylinder size (Diameter) 5 inchs, Cycle time 11 sec, Pump shaft size 1/2 inch, High presure section 192 CID Spitting force 33 tons, NEW

RAM-PAC RC-5-LP-.5S2 5 Ton Hydraulic Ram Model NumberRC-5-LP-.25 RAM PAC RC-5-LP-.25 Spring return design for fast retraction Solid, high-strength steel bar stock construction Solid bronze gland nuts reduce plunger scoring Mounting holes for easy attachment