8 inch hydraulic cylinder for sale, brand-new and used.

DETAILS

NEW OEM ALLIANZ-JOHNSTON/GOBAL CYLINDER. PART NUMBER 302344 SPS IT IS;(MEASURED WITH A TAPE MEASURE)18-3/4 OVERALL LONG FIXED END; 1/2 PIN HOLE, FROM END TO CENTER OF PIN HOLE IS 3/4, IT IS 3/4 WIDE ROD END; IS CLEVIS STYLE 1/2 PIN HOLES, FROM END TO CENTER OF PIN HOLES I

Gardner Bender KC3540 Slug-Out Knockout Converter 3-1/2" and 4" (8.89 and 10.16 cm) Brand New in the box - old stock item INCLUDES: • (1) Converter FEATURES: • For use with 3-1/2" to 6" punches and dies • Eliminates the need for spacers • Helps to center the hole • Requires 1.5 inch guide hole SPECIFICATIONS: • For use with 3-1/2" to 6" punches and dies • Requires 1.5 inch guide hole Use the Gardner Bender KC3540 Knockout Converter whenever you need to create larger punch sizes (3.5 to 6 inch).

Up for sale is a new, unused, Eaton Hydraulics 8" bore X 10" stroke cylinder from military surplus stock. Item weighs 125lbs. Always happy to combine shipping charges as well on multiple items, just send me a destination zip code and I will figure the shipping charges before you check out.

JET Jumbo 1,100 Lb. Capacity Scissor Lift Table Model #: SLT-1100 / Stock #: 140780

Alemite 308730 Hydraulic Coupler, Narrow, 1/8" Female NPTF Product Features

This Hydraulic Cylinder Jack has been on the shelf in an outbuilding for many years and I don't know if it's new or re manufactured, It has a 1/4" pipe NPT hole in both ends, still the original plugs in them, It's made by Ortman Miller Mach Co. Inc. Hammond Ind.

Alfa Laval Viscoline Dynamic scraped surface tubular Heat Exchanger (SSHE). NEW in crate - not used. Recipricating scrapers driven by hydraulic cylinder and hydraulic power unit.

[ Maxim 288-326 2-1/2 In Bore Dia 16 In Stroke Hydraulic Cylinder

[ Maxim 288-362 3-1/2 In Bore Dia 48 In Stroke 3000 PSI Hydraulic Cylinder

This is a small hydraulic cylinder. I am not sure what is was made to do. It has one inlet and appears to be made to be welded in place by the angle bracket.

2" x 8" stroke hydraulic cylinder. Ball style ends with 7/8" pin holes. 1" inch rod20 1/2" closed dimension.

2.5" x 8" stroke hydraulic cylinder. 1 fixed and 1 ball style end--both with 1 1/4" bore. 1 3/8 inch rod#6 SAE fittings.

2" x 16" stroke hydraulic cylinder. Clevis style with 1" pins. 1 1/8 inch rod3/8 NPT fittings.

Numatics hydraulic cylinder, 5/8" shaft/6" shaft exposed at rest, 9.5" extended=3.5 inch stroke 3"x4 5/8" mounting plate with (4) .338" holes on shaft end, 1/2" clevis pin on opposite end Please contact me if you have questions about this item. Thanks for looking.

This is a new top qualtiy hydraulic cylinder. Made in Canada for John Deere. 2.75 X 8 X 1.25 rod dia.