Agilent/HP Agilent HP 8673B 2 - 26 GHz Synthesized Signal Generator, US $3,995.00 – Picture 0

Agilent/HP Agilent HP 8673B 2 - 26 GHz Synthesized Signal Generator, US $3,995.00 – Picture 1

Agilent/hp Agilent Hp 8673b 2 - 26 Ghz Synthesized Signal Generator

US $3,995.00

Rocklin, California, United States
Jan 29th

Open on mobile:
QR code

TESTWORLD MONDAY – FRIDAY 8AM-5PM PT TestWorld has been serving customers around the globe for nearly a decade with great and affordable networking and test equipment units. We are continuously improving our customer service to ensure that our clients are completely satisfied with their purchases and receive the best units available in the market. Our 30,000 Sq.Ft. state of the art facility has over $2 million of cutting edge technology inventory. "THANK YOU FOR VISITING OUR STORE. WE VALUE YOUR BUSINESS. IT IS OUR PLEASURE TO ASSIST YOU IN YOUR PURCHASE." We strive for perfection and aim to leave all of our customers satisfied. If there are any issues with your item please contact us before opening a case at our customer service, toll-free number, 855-200-TEST YOU ARE BIDDING ON A Agilent/HP Agilent HP 8673B 2 - 26 GHz Synthesized Signal Generator **30 DAY WARRANTY + CALIBRATION** The HP 8673B Synthesized Signal Generator has a frequency range of 2.0 to 26.0 GHz (1.95 to 26.5 GHz over-range).The output is leveled and calibrated from +8 dBm to --100 dBm, depending on the frequency and options. Frequency, output level, modulation modes, and all other functions except line switch can be remotely programmed via HP-IB. Long-term frequency stability is dependent on the time base, either an internal or external reference oscillator. The internal crystal reference oscillator operates at 10 MHz while an external oscillator may operate at 5 or 10 MHz. The output of the Signal Generator is exceptionally flat due to the action of the internal automatic leveling control (ACL) loop. External drive signals are required for all modulation modes. AM depth and FM deviation vary linearly with the applied external voltage. Full scale modulation is attained with a 1.0 volt peak signal. Pulse modulation is compatible with TTL levels. Two ranges of AM depth can be selected: 30% and 100%. The front panel meter can be set AM depth. Specified AM rates are from 20 Hz to 100 kHz. Six ranges of FM deviation are selectable: 0.03, 0.1, 0.3, 1,3, and 10 MHz. FM peak deviation can be set using the front panel meter. At output frequencies below 6.6 GHz, peak deviation is limited to 10 MHz or five times the modulation frequency, which ever is lower. From 6.6 to 12.3 GHz, peak deviation is limited to the lesser of 10 MHz or ten times the modulation frequency; from 12.3 to 18.6 GHz the lesser of 10 MHz or fifteen times the modulation frequency; from 18.6 to 26.0 GHz the lesser of 10 MHz or twenty times the modulation frequency. Usable modulation rates fall between 100 Hz and 10 MHz. Pulse modulation has two operating modes: NORM (normal mode) and COMPL (complement mode). In the normal mode the RF output is On when the drive signals the TTL high state. In the compliment mode the RF output is On when the drive signal is in the TTL low state. The Signal Generator is compatible with HP-IB to the extent indicated by the following code: SH1, AH1, T5, TE0, L3, LE0, SR1, RL1, PP1, DC1, DT1, AND C0. The Signal Generator interfaces with the bus via three-state TTL circuitry. UNIT'S SPECIFICS Minimum Frequency 2 GHz Maximum Frequency 26.5 GHz Frequency Resolution 4 kHz Time base stability 0.000000005 /day External Frequency Reference 10 MHz Minimum Output Power -100 dBm Maximum Output Power 8 dBm Power Resolution 0.1 dB Output Impedance 50 Ohm Minimum Single-Side-Band Noise -105 dBc/Hz Maximum Single-Side-Band Noise -46 dBc/Hz Harmonics (noise) -40 dBc Non-harmonics (noise) -58 dBc Modulation AM,FM,Pulse External Modulation Inputs(Types) No Sweep Modes Linear,List Maximum points of step sweep 9999 pt/sec NO RETURNS/NO REFUNDS Please ask all of your questions before placing your bid Payment Policy Only PayPal is accepted (A Confirmed Address is required). PayPal accepts Visa, MasterCard, Discovery, American Express and eChecks. Immediate Payment is required after the Winning Bid. Failure to pay for your item within 5 days will result on the cancellation of the transaction. Shipping Policy Shipping within the 48 Contiguous United States. International Bidders, Alaska and Hawaii: Please contact us with City, Country and Zip Code BEFORE PLACING YOUR BID for S&H rate which could be expensive. Customs, duties and Import Taxes for items shipped overseas are buyer's responsibility. No P.O. Box Delivery No APO/FPO Delivery PayPal Confirmed Addresses Only Items will be shipped by FedEx Ground on the same or next business day of receiving full payment. Exceptions may apply - see below. If fresh calibration is included on the listing, the unit will be shipped to the buyer after it passes calibration. Lead time for fresh calibration can be up to 10 business days. FedEx/UPS Tracking Number will be provided to the Buyer's PayPal email linked to the transaction. 7.5% tax added if item ships to California All items are shipped with signature requirement, please advice seller if other arrangements need to be made All items are shipped to PayPayl confirmed address, once item is shipped there is a $20 fee for address changes Returns Policy Our goal is to ensure you are completely satisfied with your purchase. Please read the description above for full details about the unit and if any additional warranty is offered. If no warranty is offered, unit is being sold "AS-IS" - no returns or exchanges are accepted. If item is "New" or "NIB", returns are not accepted. Please inspect your purchase carefully. All claims for damaged or missing units must be received within 7 days of receipt of merchandise. If unit needs to be returned for replacement or refund, buyer is responsible for return shipping costs.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Agilent / HP
Model	8673B