arbor spacers for sale, brand-new and used.

We Have 1,000's of New And Used MetalWorking Machines And Tooling! If You Have Any Questions Or Are Looking For Something Particular Call Us @ 909.919.9600! NL Make: Bridgeport Condition: Great Specifications: Arbor Size: 1-1/4" Arbor Length: 1-1/2" Spacers: (2) 3/8" & (1) 3/4" Shank: R8 Right Handed Overall Length: 7-1/2" Comes as shown in pictures.

Listed are 2 R8 Horizontal Milling Arbors, one is made in Italy and the other Unknown. Presume both are for Bridgeport Horizontal milling using the 90° Head and tailstock. Both shafts are 1" Outside Diameter.

Approx. 100 pieces of 1 1/4" arbor spacers. I think there are three sets of the 19 piece Precision Brand spacers and a bunch of others.

This is a Mil Arbor with a NMTB #30 Taper. The arbor section 1" diameter X 1-7/8" long with a 1 X14 thread. It comes with 8 spacers: 0.750 0.375(2) 0.250 0.126(2) 0.0625(2).

I spent 30 years as a Special Machine Builder and Machinist. I retired from the tooling trade over 20 years ago so the time has come to pass along my precision tools and tooling to someone who has a use for them. For sale is my Bridgeport mill, slitting saw holder, left hand 1" - 8 nut and 13 various thickness spacers.

Shopsmith Shaper Cutters, Arbor and spacers Units are used. 4 cutters, arbor and spacers. See photos Shipping by location.

Lot of 21 new arbor spacers/bushings with 1 1/4" arbor diameter. Lengths varie from approximately .010" to 3". Items may have a little discoloration on them from oil, however, they are new.

This Sale is for ONE NOS (New old Stock) 1-1/16" Diameter x 2-3/4" Long MILLING Machine Horizontal Stub ARBOR with No. 4 MORSE TAPER Item #A. The length is approximate as I was not sure where to measure from, the shaft is 2-3/4" long while the spacers take up 3" measured as shown in photos.

start_elivehelp_btncodeend_elivehelp_btncode You are buying a lot of 65 arbor spacer rings with keyway. 2 3/4" x 1/4"

Listed 4Milling machine arbor tool holders with 1-1/4" shank. The tool holder is also for a 1-1/4" id tool. Also included are the shown arbor spacers and nuts.

NEW Deluxe Set of Arbors ALL New. USA This is an six piece set. Many hours of time to make such a set.

I doesnt look as if this arbor has ever been used . It is very straight. I put it between dead centers on my lathe .

TTC Precision Milling Machine Arbors 30-40-50 Taper - Length Of Shoulder To Nut: 30" Arbor: 51-1/2 - B30-5 51-1/2B30-5 MILLING MACHINE ARBOR - TTC National Standard 30-40-50 Tapers

Up for sale is a stub nose milling arbor with R-8 shank. Item is in good usable condition. Item does have small nick on collet channel.

PARLEC CAT 50 Stub Arbor Shell Mill Holder 1-1/4" Marked C50-12SA4 No key in the arbor 3/4". 3/8" (two)1/8" and 3/32" spacers used working condition You get it just as you see in the pictures Posted with eBay Mobile

PARLEC CAT 50 Stub Arbor Shell Mill Holder 1-1/4" Marked C50-12SA6 No key in the arbor 3/4". 3/8". And 1/8" spacers used working condition You get it just as you see in the pictures Posted with eBay Mobile

var noresize = 0;

var noresize = 0;