asme b16.3 for sale, brand-new and used.

1-1/2" 150# FLANGED NILCOR 610XP ST-T-H-S BALL CHECK VALVE Note: This valve is missing the handle. 1. SCOPE Ball Check Valves made from fiber-reinforced Thermoset Resins for corrosive chemical service used in construction of pressurized piping systems.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 5 sets of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 2" long, with knurled nuts.

Hi, up for sale is 5 sets of Mini, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong. These have a 45 degree taper with 1/4"-20 removable threads, 2" long, with knurled nuts.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

var itemNumber = window.ebayItemID ?