bearing shaft for sale, brand-new and used.

New Mi-T-M 3-0202 PW3555 General Pump

•

This is a Brand New "New Old Stock" Karcher Pump. Part # 3.532-714 ; 3532714. The Picture can describe this item better than I can.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

FEATURES: Manifold with fine thread valve caps The preferred pump frame in the pressure cleaning industry Forged brass manifold with an exclusive lifetime warranty Large capacity, die-cast , anodized aluminum oil-bath crankcase Over-sized connecting rods for maximum life Heavy duty tapered roller bearing Solid ceramic plungers with continuously lubricated packings Unitized stainless steel inlet and discharge valves Designed for suction applications Technical Notes

Pressuure Washer EZ-44 Series EZ2536 General Pump; 3.6GPM; 2500 PSI; 1750 RPM EZ-44 Series EZ2536 General Pump; 3.6GPM; 2500 PSI; 1750 RPM General Pump

EZ SERIES 44S FEATURES: Solid ceramic plungers Flex coupling and bell housing available for direct drive Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version

The MOSMATIC DYC 55.163 3/8FPT inlet and G3/8 M outlet Swivel is one of the most Popular and Dependable Rotary Unions on the market. This easy turning heavy duty DYCI swivel is specifically designed for use with water under high pressure at high rpm. Ready for installation as a self rotating unit with the appropriate spray bar and nozzles (not included) .

EZ SERIES 44G FEATURES: Solid ceramic plungers Standard SAE J609 gasoline mounting flange for up to 13 hp engines Forged brass manifold with an exclusive lifetime warranty and 4:1 hydrostatic rating Die cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves Available in "L" left handed version SPECIFICATIONS: Tripl

FEATURES: Innovative one piece plunger design 5% reduction in crankcase load compared to standard 3000 psi 15mm pumps Superior plunger performance against thermal shock and cavitation due to new, unique bonding process Standard SAE J609 gasoline mounting flange for up to 16hp engines Forged brass manifold with a 3:1 hydrostatic rating Die-cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves

FEATURES: Innovative one piece plunger design 5% reduction in crankcase load compared to standard 3000 psi 15mm pumps Superior plunger performance against thermal shock and cavitation due to new, unique bonding process Standard SAE J609 gasoline mounting flange for up to 16hp engines Forged brass manifold with a 3:1 hydrostatic rating Die-cast, anodized aluminum, oil bath crankcase Premium roller bearing Unitized stainless steel inlet and discharge valves

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: Eight 6mm grade 12.9 Plungers: Special thick solid ceramic for long life, strong durability and more resilience Crankcase: precisions die cast, large cooling fins, and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

Triplex Plunger Pump FEATURES: Manifold: High strength forged brass for long term use Bolts: eight 6mm grade 12.9 Plungers: A special thick solid ceramic for long life, strong durability and more resilience Crankcase: Precison die cast, large cooling fins and anodized for maximum heat dissipation. Sight glass, fill and side and bottom drain plugs Bearings: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side. Valves, Seats, a

Patented design pump head FEATURES: MANIFOLD: NEW high efficiency design concept. Patented forged brass for strength and no porposity for long life and higher hydrostatic pressures BOLTS: Eight 6mm grade 8.8 PLUNGERS: Ceramic coated stainless steel CRANKCASE: Precision die-cast cooling fins and anodized for maximum heat dissipation BEARINGS: Oversized for maximum life and load disbursement, needle bearing on the drive side and ball on the non drive side.

USED - DeWalt # 5140142 pressure washer pump. 3400 PSI @ 2.5 GPM TESTED. Sells new for $442 + shipping.

Shoulder screws are one-piece screws with a cylindrical shoulder under the head that serves as a bearing or spacer. Used for a wide range of punch and die operations, such as the location and retention of stripper plates, and they also act as a guide in blanking and forming presses. You'll find them used as bearing pins for swing arms, links and levers; as shaft for cam rolls and other rotating parts; as pivots; and as stud bolts.

14BF3312 up for sale is a set of 3 special squash head lock nuts used on the military HMMWV and other military equipment, this has a 7/16-20 thread inside.

14N4312 up for sale is a set of 10 special squash head lock nuts used on the military HMMWV and other military equipment, this has a 7/16-20 thread inside.