bolt 36 for sale, brand-new and used.

Hex Head Cap Screw Bolt 1/2-13 x 4-1/2" Grade 5 w/ nut & washer (3 packs of 4) You get a total of 12 each bolts, washers and nuts per purchase (for $11.95).

The Lotoons Store NEW L.H. Dottie EB2 Eye Bolt Open Eye 3/16-Inch Diameter by 1-1/4-Inch Length Zinc Plated 50-Pack

• U- Bolt Type LOT OF 12pc 1/2" • Malleable Iron • Zinc Platted • Length : 65.6MM • Width : 36.5MM • Thickness : 10mm

Up for sale is 1ea of a MAXXIMA MWL-50SP featuring 6 Philips Lumileds Luxeon T LEDs rectangular work light 1350 lumens which will work on both 12/36V systems. The new series of 6 LED 1,350 Lumen work lights provide a wide flood beam pattern perfect for work and utility applications. Dual Auto Select 12/36 VDC voltage, Powder coated aluminum housing, shatter proof polycarbonate lens, and stainless steel mounting bracket & bolt.

VULCAN NO. 36 EYE BOLT 2" thread nut included Eye opening 3 1/4" 11 5/8" x 7" weight 18lbs 15 oz Made in the USA

Steel Shelving Sturdy Storage Rack With 5 Utility Shelves 4000 lbs Capacity This Edsal stockpiling rack has an edge made of steel for quality with a smooth dark completion for imperviousness to erosion, five movable molecule board racks, and a 4,000 lb. limit when the weight is equitably appropriated over all racks. It is suitable for sorting out and putting away things.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.