bolt flat head for sale, brand-new and used.

This is a grab bag type listing of concrete anchors. They are mostly various styles of 3/8 size and 5/8 size anchors with a few 1/4 in redheads and a couple 3/4 in 7 in long anchors. There 38 3in long 5/8 dia.

20 count - Toggler 3/16” – 20 Snaptoggle toggle bolts and FastenalFlat Head Phillips 10 – 24 X 3 bolts Holds up to 238 lbs.* in 1/2 inch drywall Holds up to 802 lbs.* in concrete *Holding values: Per anchor with 3/16”-24 bolts Holding Values with other bolts and materials available at toggler website Specifications per Toggler Specifications BL = T + W = 1/2 ” (12 mm).

Toggler Snaptoggle, 10 Pack, 1/4"-20", BB Hollow Wall Anchors, 1/2" Head Bolts, Replaces Old Fashioned Toggle Wings, Strongest & Require The Smallest Hole, Can Be Pre-Installed Without Using A Bolt & Won't Fall Behind The Wall When The Bolt Is Removed, Solid Metal Channel Centers The Bolt Which Cannot Sag, Will Not Damage Or Break Through The Wall Even Under Vibration.

GRIPPER BAR HOLDER FOR KOMORI PRINTING PRESS PART: 444-3239-034 MORE USED KOMORI LITHRONE SPRINT SPICA PARTS IN STORE; PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS WE ALSO SELL AND BUY USED KOMORI LITHRONE SPRINT SPICA PRINTING PRESSES

KOMORI WASHUP BLADE DESCRIPTION: LITHRONE 28 METAL AND RUBBER ORIGINAL PART PART NUMBER: 281-4601-401 CONDITION: NEW PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS

KOMORI ORIGINAL GRIPPER HOLDER DESCRIPTION: COMPLETE ASSEMBLY PART NUMBER: SGA-3512-400 CONDITION: NEW PLEASE CALL 1-800-991-0400 EXT O FOR MORE DETAILS

The Lotoons Store NEW JH Williams 8033A Double Head 60-Degree Offset Box End Wrench 7/8 by 15/16-Inch

Toledo Pipe Die Head 999 999A Small 1/8 to 3/4 Pipe 3/8 to 1 1/8 Bolt I selling the die holder. Some of them have good chasers some don't The chasers are included at no extra cost and might not be usable. Photo may not be of the item you will receive.

These are NEW reproduction Head Screw Bolts for Briggs & Stratton Engines. Fits Models FH, FI, FHI and other F Series engines. Set of 4 bolts 2 Thin Flat Head (Replaces Briggs Number 90917) and 2 Thick Rounded Head (Replaces Briggs Number 90790).

Note: This is not a 303-759 version. The bottom is flat with no boss and only has (2) mounting holes. I have included (2) grade 8 bolts with a tensile strength of more than 150,000 psi each.

Up for sale is (100) Hex Head 5/16 x 1-1/2" Lag Bolts Zinc Plate Wood Screws. Please see photos of the actual item for sale. Please feel free to ask any questions before bidding or buying.

KINEMATIC CYLINDRICAL BOSS MOUNTED VEE BLOCK, 0.750" CYLINDRICAL POST MOUNTED This kinematic Vee Block component (also known as Cylindrical Boss Mounted Vee Block ) is designed for both high load carrying capacity and easy installation. Because the contact area between a sphere and the precision ground flat surfaces of the Vee block is greater than that between a sphere and two cylinders, this Vee block has a much higher load carrying capacity.

12 Volt DC PM 2.75" Dual Shaft Motor. Used, tested, functional. Very powerful.

HOLDER - HOLSTER - SCABBARD....................CALL IT WHAT YOU WANT......... BUT NOW WITH THIS DEVICE, YOU WILL ALWAYS KNOW WHERE YOUR MITER IS. This neat little item attaches to the underside of your Unisaw table and stores your miter conveniently, safely, and close at hand, but totally out of the way.