brackets for tubing for sale, brand-new and used.

SPRING BLOWOUT SALE!! This is an American Made Water to Air Heat Exchanger. Limited Supply!

14x10/ 56,000 BTUs / 100 PSI For use in your hot air furnace plenum. Other sizes available.

Regency 62" Wall Mounted Tubular Rack Shelf

Regency 22" Wall Mounted Tubular Rack Shelf **** SHELF ONLY ****.

Regency 42" Wall Mounted Tubular Rack Shelf ***SHELF ONLY****.

5 Sets of 3’ X 6’7”

Queue Stabiltherm Lab Oven Cabinet Model SNW300TABB Comes with User Manual and 60 days warranty. Thermo Scientific Incubator co2 300 micro These incubators are designed to create a stable, reliable environment for cell culture applications.They operate at temperatures ranging from 5°C above ambient temperature to +60°C, accurate to ±0.2°C.The gas system controls within ±0.1% of measurable setpoint. • Thermal conductivity Sensor.

1998 VENJAKOB HGS-Z LACQUER LINE WITH SPRAY APPLICATOR ENCLOSURE, LACQUER RECOVERY SYSTEM, 101'X52" (32.7 M X 132 CM) DRYING TUNNEL AND CONTROLS. IN GOOD WORKING CONDITION. If you have any questions, please contact us here or call 425-770-7127.

Greetings All, We are selling Ludlum Model 43-37 Gas Flow Proportional Counter probes. These probes use P-10 gas and are frequently used with the Ludlum Model 239-1F floor monitor carts or for large area surveys by hand. We have the brackets for the floor monitor carts and even have carts for sale on our website (CHP Consultants).

From 2013 Freightliner with 30,000 miles, thats why we think the hours of this unit are supposed to be low. It has light scratches on the cover. All the wireing and control units from inside the truck are included.

Roth 6 Port Radiant Manifold with Flow Meters (2315006876) Roth radiant manifold made from heavy-walled, corrosion resistant brass. They include flow meters and mounting brackets.

LOT of six (6) Materials and plywood carts. Three (3) Red A frame carts. One has a taller uprights for supporting larger panels or work pieces.

Here are the specifications of what a new cost and details about the container

Forms wire, flat metal and tubing into clamps, handles, brackets, hooks, coils and more Makes sharp angle bends up to 5/16" diameter rod and 1x1/8" flat metal Made of hardened tool steel Mounts on a work bench or held in a vise Kit Includes: 3 of Circle Pins (3/16,1/4 & 1/2" diameter), 1 of each: Circle Die ( 1" Diameter), Form Pin Flower, Sharp Angle Die and Gauge This will not bend

Refurbished Brown and Sharpe MicroVal 454 Measuring strokes (X,Y,Z) 457x508x406mm or 18"x20"x16" Volumetric U1-1 axis VDI/ISO10360 = 4+4L/1000 Volumetric U3-3 axis VDI/ISO10360 = 4+5L/1000 Volumetric 3 axis Full Volume ASME B89.4.1 = .010mm with 254mm Ballbar @ 20 Position test. CMM has all new air tubing and fittings, brand new surface plate, and all air bearings have been removed cleaned, inspected, refurbished, and re-installed. In

Refurbished Brown and Sharpe MicroVal 343 Measuring strokes (X,Y,Z) 356x406x305mm or 14"x16"x12" Volumetric U1-1 axis VDI/ISO10360 = 4+4L/1000 Volumetric U3-3 axis VDI/ISO10360 = 4+5L/1000 Volumetric 3 axis Full Volume ASME B89.4.1 = .010mm with 254mm Ballbar @ 20 Position test. CMM has all new air tubing and fittings, brand new surface plate, and all air bearings have been removed cleaned, inspected, refurbished, and re-installed. Includes qualification

Refurbished Brown and Sharpe MicroVal 343 Measuring strokes (X,Y,Z) 356x406x305mm or 14"x16"x12" Volumetric U1-1 axis VDI/ISO10360 = 4+4L/1000 Volumetric U3-3 axis VDI/ISO10360 = 4+5L/1000 Volumetric 3 axis Full Volume ASME B89.4.1 = .010mm with 254mm Ballbar @ 20 Position test. CMM has all new air tubing and fittings, brand new surface plate, and all air bearings have been removed cleaned, inspected, refurbished, and re-installed. Includes qualification