carbide tip for sale, brand-new and used.

Brand new, never used 1/4" slot cutting router bit with 3 blades and a 1/2" shank. Serves for cutting 1/4" wide slots up to 3/8" deep, and thus also serves as a 3/8" rabbeting bit up to 1/4" cutting depth. Larger slot cutters will probably be better suited to this purpose, but it will work in a pinch.

Brand new, never used 1/2" dovetail router bit for making dovetail joints in furniture and drawers with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/4" core box or round nose router bit with 1/4" shank for fluting trim and other detail work. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/2" specialty straight bit for mortising door hinges with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

This is a brand new, never used 1/4" straight bit for dado or rabbeting with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

This is a brand new, never used 3/4" straight router bit for dado joinery with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/2" straight router bit for dado joinery with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 3/8" dovetail router bit for making dovetail joints in furniture and drawers with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/2" V-groove router bit for decorative fluting and letter engraving with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 5/32" roman ogee style router bit for making edge details on furniture, cabinets, or trim, with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/4" roundover bit with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/4" rabbeting router bit for rabbeting base and trim up to 1/2 inch high by 1/4 deep, with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/4" roundover bit with 1/4" shank. Fits all 1/2" shank routers with a simple adapter usually included in with the router itself. C3 Micrograin Carbide cutting edge provides a good balance of strength and durability.

Brand new, never used 1/8" corner beading bit with 1/2" shank. This type of bit is basically a round-over bit with a smaller guide bearing which allows for a ridge detail to be cut on both sides of the round. See attached image and diagram for clarification.

Brand new, never used 14 degree dovetail router bit with 5/8" cutting diameter at the widest point, carbide edges and 1/2" shank. These bits are used for woodworking joinery along with a jig, or guide. The tapered dovetail shape makes alternating passes through one panel and opposite passes through another allowing for both straight end to end joining as well as right angle joints.

This is a brand new, never used 5/32" radius roman ogee detail router bit with 1/2" shank. Overall diameter is 1-1/16" (11/32" cutting depth) with a 3/8" inch bearing and 2 carbide cutting edges (blades). Roman ogee and other edge detailing profiles are commonly seen on trim edges, and in wood furniture and are produced by running this bit along an edge while the bearing guides the router leaving a detailed edge.

Brand new, never used 1/2" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 1/4" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 1/4" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

Brand new, never used 90 degree, 3/8" diameter V-groove router bit with carbide cutting edges and 1/2" shank. These bits are used to make 90 degree corner bottom channels in wood, perhaps most commonly in letter cutting and sign making. Bit fits all 1/2" shank portable and table routers.