Contec New Ms100 Spo2 Simulator Pulse Oximeter Accuracy Saturation Simulation Pr

US $499.00

  • Elk Grove Village, Illinois, United States
  • Aug 18th
                                                                                                     NEW CONTEC MS100 SPO2 PULSE RATE SIMULATOR OXYGEN SATURATION SIMULATOR MS100                 Brief Introduction MS100 SpO2 Simulator is a kind of Separated SpO2 simulator, small and light. It can perform a series of tests for the oximeter by simulation means, and gives cognizance of veracity about the oximeter. Because the oximeter manufacturer may use different R-curves, some R-curves used abroad currently have been embedded.  Features Separated connection between simulator probe and host, operation and test are more convenient. 262K color and 320*240 TFT, adjustable brightness level. Film key-press, makes the operation more comfortable. Power with chargeable lithium battery, can display the charge information of battery. Key volume, can open or close. Main Functions Oxygen saturation simulation; Pulse rate simulation; Patient state simulation preset; Can test the reaction time of device; Can simulate the SpO2 and pulse rate under different amplitude; Can test the performance of device under different interference source;  Can select different R-curve.  Main Parameters SpO2  Measuring range: 35%~100% Resolution:1% Error: When SpO2 is 75%~100%, the error is the larger between ±2% and ±P(P denotes the precision of the tested oximeter); when SpO2 is 74%~50%, the error is the larger between ±2% and ±P; no define when SpO2 is less than 50%. Pulse rate Measuring range:25bpm~250bpm  Resolution:5bpm Error:1%±1bpm Amplitude Measuring range:0.000%~20.000%  Resolution:1% for 1.000%~20.000%; 0.1% for 0.100%~0.900%; 0.025% for 0.000%~0.075%. Patient state 24 conditions presetting and 8 conditions as default after start. The number of condition can be adjusted by Motion level setup. Voltage  DC 3.6V~4.2V  Power Supply Voltage 3.7 rechargeable lithium battery 1  Battery working life Charge and discharge no less than 500 times.  Accessaries A MS100 user manual  A 5.0V adaptor The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item. The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923,and certified by FDA of United States and CE,TUV of Europe.The Fingertip Pulse Oximeter that is FDA 510K Approved                                                                         
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture China
MPN Does Not Apply
UPC Does not apply
Brand CONTEC

Directions

Similar products from Manikins & Dummies for Training

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies