Ms200 Nibp Simulator Pulse Rate Blood Pressure Simulation Bp Monitor Calibration

US $699.00

  • Elk Grove Village, Illinois, United States
  • Aug 19th
                                                                                                     MS200 NIBP Simulator,multi-purpose tester Non-Invasive Blood Pressure Monitor                Introduction  MS200 NIBP Simulator is a multi-purpose tester applied to the oscillometric Non-Invasive Blood Pressure (NIBP)Monitor. It can test the performance of multiform blood pressure monitor, provides dynamic blood pressure simulations, static pressure calibration, automated leak testing, and pressure relief valve testing.  Main features 4.3" LCD display,interface is concision,operation is simple and convenient. Provides pressure gauge testing,pressure leak testing,relief valve testing functions . Build-in pump provides pressure source with leak and pressure relief tests   NIBP simulations for both arm and wrist cuffs. Provides adult,neonate, seven variations patients conditions,user-defined simulations. Provides arrhythmias,respiratory artifact simulations. Built-in air chamber to simulate adult and neonate cuff. Main Parameters Heart Rate for NIBP Simulations Heart Rate Accuracy:   ±1BPM Patient Conditions: Weak pulse,Tachycardia,Obese ,Geriatric: ±1% ±1BPM Mild exercise:     ±1.5% ±1BPM Strenuous exercise:    ±3% ±1BPM Pressure measurement  Units:      mmHgkPacmH2OinH2Opsi Range:      0 mmHg-400 mmHg Resolution: 1 mmHg,  0.1 kPa, 1 cmH2O,  1 inH2O,  0.1 psi   Accuracy:   0 - 300 mmHg: ±0.5 % of reading ±1 mmHg           301 - 400 mmHg: ±2 % of reading  Pressure Generation Pressure Generator, Static Pressure Range: 50 mmHg-400 mmHg Difference between target pressure and actual pressure : ±10 mmHg from 100-400 mmHg with a minimum volume of 300 cc  Internal leak rate: <2 mmHg per minute, with a minimum volume of 300 cc Power 100 - 240 V  AC 50/60 Hz, 60 VA Environmental Conditions Working temperature:  15 to 4059 to 104 Storage temperature:  -20 to +65-4 to +149 Relative humidity:    < 90/font> Display 65k colors 4.3 inch TFT Display, brightness can be changed. Size (L x W x H) 27 cm x 26.5 cm x 13.2 cm Weight 3.5kg  Accessories: Power cord Fuse User 's Manual GB onlyon request for other Language The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE:The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item. The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923,and certified by FDA of United States and CE,TUV of Europe.The Fingertip Pulse Oximeter that is FDA 510K Approved                                                                         
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model MS200
Brand CONTEC
Country/Region of Manufacture China
Intended Use/Discipline Biological Laboratory, Emergency Medicine
MPN 69450427
UPC 658126798778

Directions

Similar products from Manikins & Dummies for Training

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies