crane pendant cable for sale, brand-new and used.

Congratulations you are bidding on Telemecanique 2 button crane hoist pendant control. Unit is still in original packaging and controls up and down. Has a cable on it and a square 4 pin connector at the end.

This is a Factory New Duct-O-Wire pendant directional switch. The SP-M is a Maintained On-Off switch. these switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant directional switch. The SP-2 is a 2 speed button switch. these switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant directional switch. The SP-1 is a single speed button switch. these switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant enclosure. The L8-D is a 8 button pendant with no switches. the switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant enclosure. The L2-S is a 2 button pendant with no switches. the switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant enclosure. The L10-D is a 10 button pendant with no switches. the switches are sold seperately so you can configure your pendant to fit your application.

This is a Factory New Duct-O-Wire pendant assembly. The L6-S-1M is a 6 button pendant with 4 single speed switches and a Maintained On-Off switch. The Slim back pendant will fit many brands of hoist with little to no modifications.

This is a Factory New Duct-O-Wire pendant Momentary On-Off Switch. These switches are sold seperately so you can configure your pendant to fit your application. We have many different sizes and configurations if this is not what you are looking for.

PENDANT CABLE, INSTALLED ON CRANE WAS TO SHORT SO HAD TO GET A LONGER PIECE. IN NEW CONDITION.

This is a new, take off 2 button hoist pendant.  The cable is approximately 12' long.  Buyer pays $10.00 shipping in lower 48 states.  Please email with any questions. 

10 Ton E-M-H Over Head Bridge Crane.Removed from service in working condition. Bridge only. Hoists available separately.

Material Handling Equipment: Box Dumpers, Yard Ramps, Dock Lifts, Docks Seals and Shelters, Dock Levelers, Forklift Ramps, Gantry Cranes, Jib Cranes, Lift Tables!

_____________DESCRIPTION____________ ANTIQUE 1950 INSLEY MANUFACTURING CORPORATION INDIANA HEAVY CONSTRUCTION CRANE EQUIPMENT BRONZE WATCH FOB PENDANT EXCELLENT CONDITION / HARD TO FIND WATCH FOB / ...The Insley Manufacturing Company was founded in 1907 by William Henry Insley and produced heavy construction equipment based in Indianapolis, Indiana...

Here is a nice Saturn working 2000 lb capacity Motorized Cable Crane with a 14" Jib Arm. This crane can be inspected in Mpls MN. To set up an inspection, please call Jim .

Cut to Length Free shipping. PER FOOT CALL OR TEXT ROYCE FOR MORE INFO AT 918-638-9116

Very nice Acco Wright Work rated electric cable hoist model number C2W03 with motor driven trolley. Serial number 5322010772. 20 feet of lift at 15/5 feet per minute(2 speed).

This is a Yale 1 TON 32 foot lift I believe wire rope, cable hoist, complete with Hook, No Pendant, and trolley rollers. It came out a a working plant that shut down and is 460 volt 3 phase. I have not put power to it yet to see it run but before it leaves my shop I will wire it up and make sure it runs and is ok.

This is a Yale 1 TON 32 foot lift I believe wire rope, cable hoist, complete with Hook, Pendant, and trolley rollers. It came out a a working plant that shut down and is 460 volt 3 phase. I have not put power to it yet to see it run but before it leaves my shop I will wire it up and make sure it runs and is ok.