Eeprom Rewriter Tested With Stratasys

US $4200

Waynesville, North Carolina, United States
May 29th

Open on mobile:
QR code

+++++++++++++THIS PRODUCT IS NOT MADE OR SOLD BY STRATASYS (TM)+++++++++++++ Now you can read, modify, and rewrite your EEPROM with this easy to use device. The 3d printed case snaps on to a DS2433 printed circuit board and enables you to modify the contents and rewrite the data back to the EEPROM. You can use this to change the values in your EEPROM. Some people use this to get to the very end of the filament spool they have purchased by correcting the EEPROM data to accurately reflect the amount remaining. Some people use this to change the filament type that has been moved from a broken or jammed 3d printer cartridge, change the color data so it agrees with what a 3d printer is reporting, change the serial number data, and other data contained in the Dallas Semiconductor eeprom. Here is the simple operating process: 1. Snap the 3d printed Hands-free reader on to the EEPROM (Or place the EEPROM PCB on the reader/writer base. It has a locator peg to show you orientation. 2. Start the included Windows program and select the comm port that auto configured. 3. Select READ 4. Change the Quantity Remaining to 56 cubic inches, or whatever is left on the spool. 5. Change the serial number to the next higher whole number. 6. Select WRITE 7. Verify that the data was written by examining the READ data and you will see it has changed (it auto updates.) 8. Close the program, unplug the USB cable, and un-snap the programmer from the EEPROM. 9. Test the changes you made by using the EEPROM in the normal manner. You do not need to get a console cable, image your hard drive, root the Operating System, turn on SSH, make a Virtual Machine, etc etc. The host device reads the EEPROM and sees that the data has changed and acts accordingly. You don't need to do anything to the host device at all, such as erase any log files or remove the hard drive. This reader/rewriter is powered by USB and is designed for using the Dallas Semiconductor EEPROM used in many electronic devices. It has been tested with 3d printer cartridges by popular manufacturers. The snap on device talks to the included windows program to enable reading, writing, and archiving. This device and version is used to change various sections of the eeprom chip enabling its continued use. This device will read and rewrite any device that uses the Dallas Semiconductor EEPROM. I have not seen this fail to read or write but I only have tested it 40 times so it must be understood that there are no returns for any reason and this device is for educational and experimental purposes. The case is 3d printed in ABS and may be a different color or a slightly different mechanical design. If you want me to test this device on your cartridge before purchase, you can send me the EEPROM chip and I will do that. If you want the chip back, include some funds to mail it back and buy me a quality beer. (Or send me some new support media.) IF YOU HAVE A UPRINT, THIS HAS NOT BEEN TESTED ON A UPRINT. YOU CAN SEND ME A CHIP AND I WILL TEST IT FOR FREE. Please be aware that printer manufacturers such as Stratasys (A registered trademark that I am not associated with in any way) Want you to know that if you reload your Stratasys (A registered Trademark I am not associated with in any way) Cartridge, you will void your Stratasys (A registered trademark I am not associated with in any way)Warranty, if you have one. I am in no way associated with Stratasys (A registered trademark) nor is this product endorsed by, manufactured by, tested by, purchased by, packaged by or absolutely anything by Stratasys. (A registered trademark) INTERNATIONAL SHIPPING IS A FLAT FEE OF $25, DOMESTIC SHIPPING IS A FLAT FEE OF $7.