+ Post new Ad
Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u, US $4900 – Picture 0
Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u, US $4900 – Picture 0

Used- Wor-tex Granulator, Model Up-755, Carbon Steel. Approximately Trough-put U

US $4900

  • Bensenville, Illinois, United States
  • May 29th
Open on mobile:
QR code
Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u Click To Enlarge Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put up to 1000 pounds per hour (depending on type of material). (4) 30" Wide bolt-on blades, (2) bed knives. Star roll design infeed driven by 1 hp, 3/60/230 volt. Tilt back hopper approximately 7" x 36". 3/8" Diameter screen holes. Driven by a 10 hp, 3/60/230 volt. Set up for airveyor discharge, blower size WB1212, driven by a 3 hp, 3/60/230/460 volt, 3495 rpm motor. Serial# 2875. Built 1987. ref #: 47737002 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

3D Printer AD597 K-type Thermocouple Temperature Control Board Module Ultimaker

3D Printer AD597 K-type Thermocouple Temperature Control Board Module Ultimaker

  • ShenZhen, China
  • May 30th
PVI thermoformer 303X vacuum former PlastiVac excellent condition

PVI thermoformer 303X vacuum former PlastiVac excellent condition

  • Battle Ground, Washington, United States
  • May 30th
Stratasys 3d Printer

Stratasys 3d Printer

  • New Orleans, Louisiana, United States
  • May 30th
Used- WM. W. Meyer & Sons/Sutorbilt Vacuum Loading System. Consisting of (1) Sut

Used- WM. W. Meyer & Sons/Sutorbilt Vacuum Loading System. Consisting of (1) Sut

  • Bensenville, Illinois, United States
  • May 29th
Used- Rosenthal Manufacturing Sheeter, Model WA-S-4-HUBTEAAA-12. Approximate 48"

Used- Rosenthal Manufacturing Sheeter, Model WA-S-4-HUBTEAAA-12. Approximate 48"

  • Bensenville, Illinois, United States
  • May 29th
Used- Davis Standard 1-1/2" Thermatic III Single Screw Extruder, Model 15IN15DSP

Used- Davis Standard 1-1/2" Thermatic III Single Screw Extruder, Model 15IN15DSP

  • Bensenville, Illinois, United States
  • May 29th
Used- Battenfeld Vacuum Calibration Tank, Model V2-63-2,0. Approximate 9-1/4" di

Used- Battenfeld Vacuum Calibration Tank, Model V2-63-2,0. Approximate 9-1/4" di

  • Bensenville, Illinois, United States
  • May 29th
EEPROM Rewriter TESTED WITH STRATASYS

EEPROM Rewriter TESTED WITH STRATASYS

  • Waynesville, North Carolina, United States
  • May 29th
Used- Cumberland Granulator, Model 18 X 36-3KN, Carbon steel. Approximate 18" x

Used- Cumberland Granulator, Model 18 X 36-3KN, Carbon steel. Approximate 18" x

  • Bensenville, Illinois, United States
  • May 29th
Used- MPG Service & Sales Granulator, Model GP-1230HB. 12" x 30" Feed with tilt

Used- MPG Service & Sales Granulator, Model GP-1230HB. 12" x 30" Feed with tilt

  • Bensenville, Illinois, United States
  • May 29th
Used- Teca-Print Pad Printing Machine, Model TC 500. Maximum print 130mm diamete

Used- Teca-Print Pad Printing Machine, Model TC 500. Maximum print 130mm diamete

  • Bensenville, Illinois, United States
  • May 29th
Used- Henschel Mixer Cooler Combination. Consisting of: (1) Thyssen Henschel 10

Used- Henschel Mixer Cooler Combination. Consisting of: (1) Thyssen Henschel 10

  • Bensenville, Illinois, United States
  • May 29th
Used- Tote Tilter/Dumper, 304 Stainless Steel. Approximate 50" Wide x 48" Long x

Used- Tote Tilter/Dumper, 304 Stainless Steel. Approximate 50" Wide x 48" Long x

  • Bensenville, Illinois, United States
  • May 29th
Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

  • Bensenville, Illinois, United States
  • May 29th
Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

  • Bensenville, Illinois, United States
  • May 29th
Used- Cumberland Grinder. Approximate 24" x 18" feed with tilt pelican style hop

Used- Cumberland Grinder. Approximate 24" x 18" feed with tilt pelican style hop

  • Bensenville, Illinois, United States
  • May 29th
Used- RML Commander Grinder, Model TS1-SH-16--316-20. Staggered blade rotor. Dri

Used- RML Commander Grinder, Model TS1-SH-16--316-20. Staggered blade rotor. Dri

  • Bensenville, Illinois, United States
  • May 29th
Used- Cumberland Grinder, Size 24, Approximate 24" x 16" Feed Throat. 3 Knife op

Used- Cumberland Grinder, Size 24, Approximate 24" x 16" Feed Throat. 3 Knife op

  • Bensenville, Illinois, United States
  • May 29th
Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) B

Used- Brabender Loss-In-Weight (3) Component Feeding System. Consisting of (1) B

  • Bensenville, Illinois, United States
  • May 29th
Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx

Used- C.W. Brabender 6" Wide Sheet Line Consisting of: (1) C.W. Brabender approx

  • Bensenville, Illinois, United States
  • May 29th

People who viewed this item also vieved

Sumitomo Injection Molder Robotic Arm Control System

Sumitomo Injection Molder Robotic Arm Control System

  • Sun Valley, California, United States
  • Feb 15th
WATLO FIREROD L6173 7416 HEATER RODS 5/8X6 500W 240V

WATLO FIREROD L6173 7416 HEATER RODS 5/8X6 500W 240V

  • Barberton, Ohio, United States
  • Feb 15th
SELFA, 220V 280W f-80mm h-60mm, Injected Mould Heating Element Band

SELFA, 220V 280W f-80mm h-60mm, Injected Mould Heating Element Band

  • European Union, Lithuania
  • Feb 15th
Ultitech Model V160/2100 45MM Screw 30 Hp 160 Ton Vertical Molding Machine

Ultitech Model V160/2100 45MM Screw 30 Hp 160 Ton Vertical Molding Machine

  • Watertown, Connecticut, United States
  • Feb 15th
150mmX130mm Percision Center Square ..Stainless Steel !!

150mmX130mm Percision Center Square ..Stainless Steel !!

  • South Wales, New York, United States
  • Feb 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies