+ Post new Ad
Used- Davis Standard 1-1/2" Thermatic III Single Screw Extruder, Model 15IN15DSP, US $7300 – Picture 0
Used- Davis Standard 1-1/2" Thermatic III Single Screw Extruder, Model 15IN15DSP, US $7300 – Picture 0

Used- Davis Standard 1-1/2" Thermatic Iii Single Screw Extruder, Model 15in15dsp

US $7300

  • Bensenville, Illinois, United States
  • May 29th
Open on mobile:
QR code
Used- Davis Standard 1-1/2" Thermatic III Single Screw Extruder, Model 15IN15DSP Click To Enlarge Used- Davis Standard 1-1/2" Thermatic III Single Screw Extruder, Model 15IN15DSPA24. Approximately 24:1 L/D Ratio. Electrically heated, air cooled, 4 zone with 1 vented. Water cooled feed throat with hopper. Approximate 41" centerline height. Driven by a 15 hp, 1750 rpm DC motor, gear ratio 11.33 to 1. Includes temperature controllers for each zone, control panel with Culter-hammer respondor drive. Serial# H-6830. Built 1981. 3/60/460V. ref #: 47420001 Contact InformationAndy Cohen Aaron Equipment Company 735 E. Green St. P.O. Box 80 Bensenville, Il., 60106 Phone: 630-350-2200 Shipping & Handling Item location: Bensenville, Illinois, U.S.A. (Please note: This item is listed as in-stock inventory, but may be subject to prior sale. In this case, we will work to find you a replacement item or offer a full refund.) Services available: Freight - Check the item description or contact the seller for details Ships to: United States Seller's payment instructions All items sold are FOB Bensenville, Il. location unless otherwise noted. All items offered are subject to prior sale or other disposition. Base shipment costs $150.00. This cost may vary depending on shipment location and type of freight carrier selected. Prep for each item also will vary Please call for shipping estimates and payment terms. We accept Visa, Master Card, AMEX and wire transfers. Please advise for other payment terms. A 3% Convenience Fee will be charged if paying by credit card.All items sold are FOB Bensenville, Il. location unless otherwise noted. Return Policy If you receive an item that is not as described in the listing, the Seller may offer you a similar item or issue you a full refund. Payment Method Payment Details: Company Checks, Wire Transfers, Purchase Orders, Visa/MasterCard, Amex

Directions

Similar products from Other Plastic Processing Tools

vaccuum forming machine

vaccuum forming machine

  • Schenevus, New York, United States
  • May 30th
NEW 3D PRINTER 1.75MM NOZZLE 0.5MM

NEW 3D PRINTER 1.75MM NOZZLE 0.5MM

  • Oradell, New Jersey, United States
  • May 30th
MCP 4/01 Rapid Prototyping Vacuum Casting Machine - MCP - 05 Curing Oven

MCP 4/01 Rapid Prototyping Vacuum Casting Machine - MCP - 05 Curing Oven

  • North Brunswick, New Jersey, United States
  • May 30th
Stratasys Dimension SST 1200es 3D Printer

Stratasys Dimension SST 1200es 3D Printer

  • default, default, Singapore
  • May 30th
JGAurora Z603S Metal Frame FDM CNC Desktop 3D Printer AC110-230V With 1KG PLA

JGAurora Z603S Metal Frame FDM CNC Desktop 3D Printer AC110-230V With 1KG PLA

  • China, China
  • May 30th
3D Printer AD597 K-type Thermocouple Temperature Control Board Module Ultimaker

3D Printer AD597 K-type Thermocouple Temperature Control Board Module Ultimaker

  • ShenZhen, China
  • May 30th
PVI thermoformer 303X vacuum former PlastiVac excellent condition

PVI thermoformer 303X vacuum former PlastiVac excellent condition

  • Battle Ground, Washington, United States
  • May 30th
Stratasys 3d Printer

Stratasys 3d Printer

  • New Orleans, Louisiana, United States
  • May 30th
Used- WM. W. Meyer & Sons/Sutorbilt Vacuum Loading System. Consisting of (1) Sut

Used- WM. W. Meyer & Sons/Sutorbilt Vacuum Loading System. Consisting of (1) Sut

  • Bensenville, Illinois, United States
  • May 29th
Used- Rosenthal Manufacturing Sheeter, Model WA-S-4-HUBTEAAA-12. Approximate 48"

Used- Rosenthal Manufacturing Sheeter, Model WA-S-4-HUBTEAAA-12. Approximate 48"

  • Bensenville, Illinois, United States
  • May 29th
Used- Battenfeld Vacuum Calibration Tank, Model V2-63-2,0. Approximate 9-1/4" di

Used- Battenfeld Vacuum Calibration Tank, Model V2-63-2,0. Approximate 9-1/4" di

  • Bensenville, Illinois, United States
  • May 29th
EEPROM Rewriter TESTED WITH STRATASYS

EEPROM Rewriter TESTED WITH STRATASYS

  • Waynesville, North Carolina, United States
  • May 29th
Used- Cumberland Granulator, Model 18 X 36-3KN, Carbon steel. Approximate 18" x

Used- Cumberland Granulator, Model 18 X 36-3KN, Carbon steel. Approximate 18" x

  • Bensenville, Illinois, United States
  • May 29th
Used- MPG Service & Sales Granulator, Model GP-1230HB. 12" x 30" Feed with tilt

Used- MPG Service & Sales Granulator, Model GP-1230HB. 12" x 30" Feed with tilt

  • Bensenville, Illinois, United States
  • May 29th
Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u

Used- Wor-tex Granulator, Model UP-755, Carbon Steel. Approximately trough-put u

  • Bensenville, Illinois, United States
  • May 29th
Used- Teca-Print Pad Printing Machine, Model TC 500. Maximum print 130mm diamete

Used- Teca-Print Pad Printing Machine, Model TC 500. Maximum print 130mm diamete

  • Bensenville, Illinois, United States
  • May 29th
Used- Henschel Mixer Cooler Combination. Consisting of: (1) Thyssen Henschel 10

Used- Henschel Mixer Cooler Combination. Consisting of: (1) Thyssen Henschel 10

  • Bensenville, Illinois, United States
  • May 29th
Used- Tote Tilter/Dumper, 304 Stainless Steel. Approximate 50" Wide x 48" Long x

Used- Tote Tilter/Dumper, 304 Stainless Steel. Approximate 50" Wide x 48" Long x

  • Bensenville, Illinois, United States
  • May 29th
Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

Used- RotoGran Granulator, WO Series. Approximate 14" x 18" Feed, 3 bolt on slan

  • Bensenville, Illinois, United States
  • May 29th
Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

Used- Nelmor Grinder, Model G1436MR. Approximate 14" x 36" feed. 3 knife closed

  • Bensenville, Illinois, United States
  • May 29th

People who viewed this item also vieved

Plastic Injection molding Machine Husky Hylectric 500 tons

Plastic Injection molding Machine Husky Hylectric 500 tons

  • Miami, Florida, United States
  • Feb 15th
Radius Engineering Floware RTM 2100 Injector System, Injection Molding?

Radius Engineering Floware RTM 2100 Injector System, Injection Molding?

  • Scottsville, Virginia, United States
  • Feb 15th
Dynisco PT465XL-MCA-20M Melt Pressure Transducer 0-20,000 psig PT465XLMCA20M

Dynisco PT465XL-MCA-20M Melt Pressure Transducer 0-20,000 psig PT465XLMCA20M

  • Jenison, Michigan, United States
  • Feb 15th
Toshiba Plastic Injector Press

Toshiba Plastic Injector Press

  • Bethel, Ohio, United States
  • Feb 15th
Sumitomo Injection Molder Robotic Arm Control System

Sumitomo Injection Molder Robotic Arm Control System

  • Sun Valley, California, United States
  • Feb 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies