+ Post new Ad

Floor Sanders

The average price for current category was $413.08 last month.

There are 1886 ads in this category.

Sanding Disc Paper Bolt & Washer for Clarke C-5 Edgers, LH Thread, 960030 980024

Sanding disc paper bolt & washer for clarke c-5 edgers, lh thread, 960030 980024

  • Edmond, Oklahoma, United States
  • Jan 31st
PAPER CLAMP WASHER AND BOLT FOR CLARKE C-5 EDGERS The C-5 is the only edger we know of that uses this left-hand paper clamp bolt. We also carry C-5 brushes and brush springs, part # 330902 and 168324 (find them
Brush for Clarke C-5 edgers *SET OF 4* 330902

Brush for clarke c-5 edgers *set of 4* 330902

  • Edmond, Oklahoma, United States
  • Jan 31st
MOTOR BRUSH SET OF 4 FOR CLARKE C-5 EDGERS REPLACES CLARKE PART # 330902 These brushes are no longer supplied by Clarke. They are very hard to find anywhere. As far as we know, these brushes fit only the C-5.
Hook and Loop Pad for Clarke edgers CE7, SE7 39864A pad driver

Hook and loop pad for clarke edgers ce7, se7 39864a pad driver

  • Edmond, Oklahoma, United States
  • Jan 31st
HOOK-AND-LOOP SANDING PAD FOR CLARKE CE7, SE7 EDGERS Self-adhesive; easy to mount to the metal disc. TIP: Removing the entire assembly and immersing in boiling water will likely make the removal of the old pad much easier.
Sanding Disk with Hook Pad for Clarke edgers CE7, SE7 11226A, 61851A, 39864A pad

Sanding disk with hook pad for clarke edgers ce7, se7 11226a, 61851a, 39864a pad

  • Edmond, Oklahoma, United States
  • Jan 31st
SANDING DISC FOR CLARKE CE7, SE7 EDGERS The metal disc with hook material attached. Also included are the 6 mounting screws (a Clarke retail value of $38.40 by themselves!) Related part: The hook and loop pad 39864A is also available separately.
Sanding Disc Paper Bolt and Washer for Clarke CE7/SE7 80357A 62411A clamp

Sanding disc paper bolt and washer for clarke ce7/se7 80357a 62411a clamp

  • Edmond, Oklahoma, United States
  • Jan 31st
PAPER CLAMP WASHER AND BOLT FOR CLARKE SE7/CE7 EDGERS These edgers can be used two ways: with hook and loop discs, or with plain paper discs using this clamp. Perhaps you've been using the hook and loop, and you'd rather use the cheaper plain discs, but you've lost track of the clamp that came with your edger. We also carry the self-adhesive hook and loop replacement disc
*PAIR* Motor Brush for Clarke CE7, SE7, Recent B2 Edgers 40583A carbon

*pair* motor brush for clarke ce7, se7, recent b2 edgers 40583a carbon

  • Edmond, Oklahoma, United States
  • Jan 31st
CARBON MOTOR BRUSH WITH WIRE--SET OF 2 FOR CLARKE CE7, SE7, AND RECENT B2 EDGERS Replaces Clarke part # 40583A One pair of br
*PAIR* Brush Holder Assembly for Clarke CE7, SE7, Recent B2 Edgers 40717A

*pair* brush holder assembly for clarke ce7, se7, recent b2 edgers 40717a

  • Edmond, Oklahoma, United States
  • Jan 31st
MOTOR BRUSH HOLDER ASSEMBLY FOR CLARKE CE7, SE7, RECENT B2 EDGERS SET OF TWO CLARKE PART # 40717A Holds the brushes in position in the housing. This part is for all voltages (110 or 220). NOTE: B2 edgers that have brushes
Brush Holder Assembly for Clarke CE7, SE7, Recent B2 Edgers 40717A

Brush holder assembly for clarke ce7, se7, recent b2 edgers 40717a

  • Edmond, Oklahoma, United States
  • Jan 31st
The motor brush holder assembly (part # 40717A) is an essential component for Clarke CE7, SE7, and recent B2 edgers. It securely holds one brush inside the housing for all voltage levels (110 or 220). Please note that these brush holders only work with B2 edgers that have brushes with wires.
Paper Bolt and Washer for Clarke B2, Silverline SL7 Edgers 81751A, 62411A $11.50

Paper bolt and washer for clarke b2, silverline sl7 edgers 81751a, 62411a $11.50

  • Edmond, Oklahoma, United States
  • Jan 31st
PAPER CLAMPING BOLT AND WASHER FOR CLARKE B2, SILVERLINE SL-7 EDGERS PART # 85715A, 62411A, and cotter pin I also carry these items for the Super 7 and Super 7R edger (part # 960140, 980132) Features: Stainless steel bolt for corrosion resistance
Caster Swivel Bearing for Clarke B2 Edger # 51128A $19.50 B 2

Caster swivel bearing for clarke b2 edger # 51128a $19.50 b 2

  • Edmond, Oklahoma, United States
  • Jan 31st
CASTER SWIVEL BEARING FOR CLARKE B2 EDGER PART # 51128A NOTE: This edger takes ONE bearing per shaft (two bearings total for each sander). This is not the same bearing as is used in the wheels. Each wheel takes two bearings, part # 50740A, which we also carry.
Paper Wrench for Clarke B2 edgers 68705A socket T-handle bolt washer pad

Paper wrench for clarke b2 edgers 68705a socket t-handle bolt washer pad

  • Edmond, Oklahoma, United States
  • Jan 31st
PAPER WRENCH FOR CLARKE B2 EDGERS INCLUDES B2+, B2 DC, B2+DC FREE Paper Clamp Included
CASTER/WHEEL ASSEMBLY for CLARKE B2 EDGERS 12203A $28.00 B 2

Caster/wheel assembly for clarke b2 edgers 12203a $28.00 b 2

  • Edmond, Oklahoma, United States
  • Jan 31st
COMPLETE CASTER/WHEEL ASSEMBLY FOR CLARKE B2 EDGERS REPLACES CLARKE PART # 12203A NOTE: Clarke includes the bearing (part # 51128A) with the 12203A assembly. We do not. However, you can purchase the bearing separately for only $19.50, for a total of $47.50.
Light Socket Assembly Plus Bulb for Clarke B2 edgers 18403A 40920A B2+ DC

Light socket assembly plus bulb for clarke b2 edgers 18403a 40920a b2+ dc

  • Edmond, Oklahoma, United States
  • Jan 31st
LIGHT BULB SOCKET FOR CLARKE B2 EDGERS INCLUDES B2+, B2 DC, B2+DC Original Clarke part. Includes one bulb and the mounting screw. These parts are for 115V models only.
Caster Support Bracket for Clarke Super 7, Super 7R edgers 310803 mounting

Caster support bracket for clarke super 7, super 7r edgers 310803 mounting

  • Edmond, Oklahoma, United States
  • Jan 31st
- Edger parts and accessories Enjoy FREE FIRST CLASS SHIPPING within the US! International shipping is available as well. - All sander listings Quick Links: Additionally, Tornado Alley Tools provides refurbished floor sanders of excellent quality at a cost significantly lower than new sanders- up to two thirds less!
Paper Bolt and Washer for Clarke Super 7, Super 7R edger 960140, 980132 $11.50

Paper bolt and washer for clarke super 7, super 7r edger 960140, 980132 $11.50

  • Edmond, Oklahoma, United States
  • Jan 31st
PAPER CLAMPING BOLT AND WASHER FOR CLARKE SUPER 7, SUPER 7R EDGERS PART # 960140, 980132, and cotter pin I also carry these items for Clarke B2 and Silverline SL7 edgers (part # 85715A, 62411A) Features: Stainless steel bolt for cor
BULB SOCKET FOR CLARKE EDGERS SUPER 7, 7A, 7R, SUPER E WITH BULB! 46902A 40920A

Bulb socket for clarke edgers super 7, 7a, 7r, super e with bulb! 46902a 40920a

  • Edmond, Oklahoma, United States
  • Jan 31st
LIGHT SOCKET WITH BULB FOR 115V CLARKE EDGERS Fits Super E, Super 7, Super 7R, Super 5, and others PART # 46902A, 40920A A replacement socket... and a bulb! NOTE: Socket works for either 115V or 230V models; however, the bulb works only for 115V.
Lamp Guard Light Cover Clarke Super 7-R, 7-A, Super E Edgers 303602

Lamp guard light cover clarke super 7-r, 7-a, super e edgers 303602

  • Edmond, Oklahoma, United States
  • Jan 31st
BRUSH HOLDER ASSEMBLY FOR CLARKE SUPER 7-R, 7-A, and SUPER E EDGERS GENUINE CLARKE PART # 303602 Mounting screw included.
Vent Plug, Clarke Super 7-R, 7-A, Super E Edgers 306802 cover cap brush

Vent plug, clarke super 7-r, 7-a, super e edgers 306802 cover cap brush

  • Edmond, Oklahoma, United States
  • Jan 31st
BRUSH HOLDER ASSEMBLY FOR CLARKE SUPER 7-R and SUPER E EDGERS GENUINE CLARKE PART # 306802
CASTER/WHEEL ASSEMBLY CLARKE SUPER 7-R, SUPER E EDGERS 12208A $32.00

Caster/wheel assembly clarke super 7-r, super e edgers 12208a $32.00

  • Edmond, Oklahoma, United States
  • Jan 31st
COMPLETE CASTER/WHEEL ASSEMBLY FOR CLARKE SUPER 7-R and SUPER E EDGERS REPLACES CLARKE PART # 12208A MSRP for this item is $53.00 (not including shipping). With free shipping, you save more than $25.00!
CARBON MOTOR BRUSH SET/2 FOR OLDER CLARKE SUPER 7, 7A EDGER $16.00 PAIR

Carbon motor brush set/2 for older clarke super 7, 7a edger $16.00 pair

  • Edmond, Oklahoma, United States
  • Jan 31st
CARBON MOTOR BRUSH--SET OF 2 FOR CLARKE SUPER 7, SUPER 7A EDGERS One pair of brushes for Clarke Super 7 or Super 7A edgers. IMPORTANT!

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies