+ Post new Ad

Floor Sanders

The average price for current category was $413.08 last month.

There are 1886 ads in this category.

Fan Belt 1/2" for Clarke DU8 , Hiretech HT8 Drum Sanders 903273

Fan belt 1/2" for clarke du8 , hiretech ht8 drum sanders 903273

  • Edmond, Oklahoma, United States
  • Jan 31st
1/2" FAN BELT FOR CLARKE DU8 OR HIRETECH HT8 Brand new OEM part. We also carry the drum/drive belt, part number 903260.
Paper Clamp w/Screws for Clarke DU8/EZ8, Hiretech HT8 Drum Sanders 162007 280678

Paper clamp w/screws for clarke du8/ez8, hiretech ht8 drum sanders 162007 280678

  • Edmond, Oklahoma, United States
  • Jan 31st
3-HOLE PAPER CLAMP FOR CLARKE EZ8, DU8 OR HIRETECH HT8 Brand new OEM part, ready to mount. Includes 3 stainless steel clamp screws (Phillips head).
Base Twist Lock Plug for Clarke DU8 , Hiretech HT8 Drum Sanders 911045 912072

Base twist lock plug for clarke du8 , hiretech ht8 drum sanders 911045 912072

  • Edmond, Oklahoma, United States
  • Jan 31st
BASE TWIST LOCK PLUG FOR CLARKE DU8 OR HIRETECH HT8 Brand new OEM part, ready to mount. Includes ground wire and instructions. Thi
Front Drum Guard for Clarke DU8 , Hiretech HT8 Drum Sanders 54214A, 163795 cover

Front drum guard for clarke du8 , hiretech ht8 drum sanders 54214a, 163795 cover

  • Edmond, Oklahoma, United States
  • Jan 31st
DRUM GUARD FOR CLARKE DU8 OR HIRETECH HT8 Brand new OEM part, ready to mount. Includes warning label. This part, like a majori
Caster Wheel For Clarke EZ-8 Drum Sander, FA-8 Abrader 59960A Swivel Rear

Caster wheel for clarke ez-8 drum sander, fa-8 abrader 59960a swivel rear

  • Edmond, Oklahoma, United States
  • Jan 31st
CASTER WHEEL FOR CLARKE EZ-8 DRUM SANDER PART # 59960A This is the rear caster wheel, not the ones on either side of the unit. Unfortunately, Clarke does not offer wheel and bearings separately. We also carry the truck (side) wheels (part
Toggle Start Switch Clarke 47387A 47387B EZ-8 Drum Sander FA-8 Abrader DP3T ez8

Toggle start switch clarke 47387a 47387b ez-8 drum sander fa-8 abrader dp3t ez8

  • Edmond, Oklahoma, United States
  • Jan 31st
TOGGLE SWITCH FOR CLARKE EZ-8 DRUM SANDER, FA-8 ABRADER PART # 47387B (PREVIOUS PART # 47387A) This is the main power toggle switch (off/run/momentary start). Prewired and ready to install, as shown in photo. Rated 15 amps @ 125 volts.
Belt Guard Cover for Clarke EZ-8 Drum Sander, FA-8 Abrader 29918A 23807A 23807B

Belt guard cover for clarke ez-8 drum sander, fa-8 abrader 29918a 23807a 23807b

  • Edmond, Oklahoma, United States
  • Jan 31st
BELT GUARD FOR CLARKE EZ-8 DRUM SANDER, FA-8 ABRADER PART # 29918A (old 23807A, 23807B) This guard replaces the old style as shown in the first photo above. It is somewhat heavier and sturdier, and provides more protection against fingers trying to get themselves in trouble. The screws are included.
Dust Elbow and Bag for Clarke OBS-18 DC Floor Sanders 61833A 53741A exhaust tube

Dust elbow and bag for clarke obs-18 dc floor sanders 61833a 53741a exhaust tube

  • Edmond, Oklahoma, United States
  • Jan 31st
NEW STYLE DUST ELBOW AND BAG FOR CLARKE OBS-18 DC Includes the dust tube and dust bag, plus the rubber s
Vacuum Hose Clarke OBS-18 DC 30407B dust blower suction squeegee 17/20

Vacuum hose clarke obs-18 dc 30407b dust blower suction squeegee 17/20

  • Edmond, Oklahoma, United States
  • Jan 31st
REPLACEMENT FOR DUST CONTROL SUCTION HOSE FOR CLARKE OBS-18 DC CLARKE PART # 30407B This is an economical replacement for the Clarke OEM hose, which retails for an
Pad Driver Base Plate, Clarke OBS-18 Plus Parts 20901A, 29931A orbital rigid dc

Pad driver base plate, clarke obs-18 plus parts 20901a, 29931a orbital rigid dc

  • Edmond, Oklahoma, United States
  • Jan 31st
PAD DRIVER BASE PLATE CLARKE PART # 29931A (previously 20901A) With free shipping, this is the best price you'll find.
Pad Driver Base Plate/Grip Face, Clarke OBS-18 20901A 32519A 29931A 39730A rigid

Pad driver base plate/grip face, clarke obs-18 20901a 32519a 29931a 39730a rigid

  • Edmond, Oklahoma, United States
  • Jan 31st
RIGID BASE PLATE, PAD DRIVER GRIP FACE PLUS Bearing and Rubber Spring Mount Kit FOR CLARKE OBS-18 AND OBS-18 DC CLARKE PART # 29931A, 39730A (previously 20901A, 32519A)
BASE PLATE BEARING FOR CLARKE OBS-18 50736A Electric Motor Quality

Base plate bearing for clarke obs-18 50736a electric motor quality

  • Edmond, Oklahoma, United States
  • Jan 31st
BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A FOR THE CLARKE OBS-18 or OBS-18 DC ORBITAL SANDER The bearing is rated EMQ (Electric Motor Quality) and double sealed. This is very important in an application where the bearing operat
PAD DRIVER SPRING MOUNT KIT FOR OBS-18 BRAND NEW 10666A SET OF FOUR 4 dc

Pad driver spring mount kit for obs-18 brand new 10666a set of four 4 dc

  • Edmond, Oklahoma, United States
  • Jan 31st
RUBBER PAD DRIVER SPRING MOUNT KIT PART # 10666A MADE FOR THE CLARKE OBS-18 and OBS-18 DC ORBITAL SANDER These are brand new replacement parts. Included: four rubber springs, four lock washers, four lock nuts.
BASE PLATE BEARING and RUBBER SPRING KIT 50736A, 10666A CLARKE OBS-18

Base plate bearing and rubber spring kit 50736a, 10666a clarke obs-18

  • Edmond, Oklahoma, United States
  • Jan 31st
RUBBER SPRING KIT AND BEARING FOR PAD DRIVER PLATE CLARKE PART # 50736A and 10666A FOR THE CLARKE OBS-18, OBS-18 DC ORBITAL SANDER High quality double-sealed bearing, plus set of 4 rubber springs. The springs are identical to those supplied by Clarke.
LOCKING HANDLE CAM LOCK ASSEMBLY FOR CLARKE OBS-18 56109699 461404 441301 $19.00

Locking handle cam lock assembly for clarke obs-18 56109699 461404 441301 $19.00

  • Edmond, Oklahoma, United States
  • Jan 31st
CAM ASSEMBLY WITH GRIP CLARKE PART # 56109699 FOR THE CLARKE OBS-18 or OBS-18 DC ORBITAL SANDER Also may fit other machines This assembly replaces the old style, which is similar except for the rubber grip, and was sold as separate parts rather than an assembly, including part numbers 461404, 925592, 441301, 980349, 980645, and 920248. (The last three parts: cam washer, plain washer, and locking nut,
CAM WEAR WASHER FOR LOCKING HANDLE FOR CLARKE OBS-18 980349 $7.50 OBS18 DC

Cam wear washer for locking handle for clarke obs-18 980349 $7.50 obs18 dc

  • Edmond, Oklahoma, United States
  • Jan 31st
CAM WEAR WASHER CLARKE PART # 980349 FOR THE CLARKE OBS-18 or OBS-18 DC ORBITAL SANDER Also may fit other machines I also carry the full cam assembly, part # 56109699 (which replaces part numbers 461404, 925592, and 441301) FREE FIRST CLASS SHIPPING! (U. S.
STRAIN RELIEF, PLASTIC, 1/2 NPT *SET OF 3* CLARKE FLOOR SANDERS 627561 OBS, ETC

Strain relief, plastic, 1/2 npt *set of 3* clarke floor sanders 627561 obs, etc

  • Edmond, Oklahoma, United States
  • Jan 31st
3 PLASTIC STRAIN RELIEFS BUY TWO, GET ONE FREE FOR MANY CLARKE SANDERS PART # 627561 This strain relief fits any handle with a 1/2" NPT (pipe thread) inlet. It will not fit all sanders (for example, the E
STRAIN RELIEF, PLASTIC, 1/2 NPT, CLARKE FLOOR SANDERS 627561 $8.50 OBS, ETC.

Strain relief, plastic, 1/2 npt, clarke floor sanders 627561 $8.50 obs, etc.

  • Edmond, Oklahoma, United States
  • Jan 31st
PLASTIC STRAIN RELIEF FOR MANY CLARKE SANDERS CLARKE PART # 627561 This strain relief fits any handle with a 1/2" NPT (female pipe thread) inlet. It will not fit all sanders (for example, the EZ-8 or FA-8, which take a 3/8" NPT). It comes with a lock nut, as shown; howeve
Dust Control Conversion Kit for 18-20" Buffer Polisher Sander skirt

Dust control conversion kit for 18-20" buffer polisher sander skirt

  • Edmond, Oklahoma, United States
  • Jan 31st
DUST CONTROL CONVERSION KIT FOR 18" to 20" ROTARY SANDERS The dust skirt greatly improves the effectiveness of the machine's dust removal, by containing the sanding particles under the machine and by improving the suction. It has a quick-release clamp, so it i
Dust Skirt for 18-20" Buffers Polishers Sanders many makes and models

Dust skirt for 18-20" buffers polishers sanders many makes and models

  • Edmond, Oklahoma, United States
  • Jan 31st
DUST SKIRT FOR 18" to 20" ROTARY SANDERS The dust skirt greatly improves the effectiveness of the machine's dust removal, by containing the sanding particles under the machine and by improving t

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies