fluted tip for sale, brand-new and used.

This tool does not cut a morse taper, but the cutting edges are tapered, details about the cut are below Item ...................... Standard Straight Fluted Tapered pin Reamer

IF YOU ARE INTERESTED IN THIS PLEASE READ THE SHIPPING NOTE! DESCRIPTION I had to list this as used because I can't be sure it wasn't. I think it was as the tip appears to have been ground and also seems sharp.

These come in boxes off 200 and I break them up to sell 25.  These don't come in a factory Milwaukee box. Milwaukee SDS+ Bit 3/16" x 4" x 6" 25pk Model Number: 48-20-7511 Mi

Cabinet Tip Screwdriver, 1/4X2 IN Model: S-52 Made in: USA Manufacturer: Ampco Weight:

Phillips Screwdriver, 4 Pt Model: S-1101 Made in: USA Manufacturer: Ampco Weight:

Screwdriver Nonsparking, 3/16X8 IN Model: S-55 Made in: USA Manufacturer: Ampco Weight:

Threaded pin punch handle machined from billet brass and designed for aircraft sheetmetal techs with access to 1/4-28 threaded drill bits. With this handle, simply take any 1/4-28 threaded drill bit, cut off the fluted portion and your in business. Anyone who has worked with pin punches knows how quickly the small sizes get bent/broken.

If you have access to 1/4-28 threaded drill bits this is the pin punch handle for you. Machined from billet brass and threaded 1/4-28 on one end. Simply take your used, dull threaded drill bits and cut off the fluted portion and you have a replaceable pin punch tip.

If you have access to 1/4-28 threaded drill bits this is the pin punch handle for you. Machined from billet brass and threaded 1/4-28 on one end. Simply take your used, dull threaded drill bits and cut off the fluted portion and you have a replaceable pin punch tip.

If you have access to 1/4-28 threaded drill bits this is the handle set for you. Machined from billet brass and threaded 1/4-28 on one end. Simply take your used, dull threaded drill bits and cut off the fluted portion and you have a replaceable pin punch tip.

I have 9 bit available PRODUCT OVERVIEW Model # 48-20-5472 Milwaukee’s 1-Piece carbide tipped core bits are ideal for drilling large holes where the depth is relatively shallow. The core bit cuts a kerf only. The inside core must be removed by the operator before deeper drilling can be accompli