fluted tip for sale | 132 ads for brand-new and used fluted tip

Fluted glass funnel chemistry lab glass 13" wide 14" tall 2 gallon

Tulare, California, United States
Jun 19th

This is an extra large, Glass, fluted Chemistry Lab funnel. It is labeled 2 gal, is approximately 14 inches tall and 13 inches wide and weighs over 7 pounds. There are no cracks or chips, but areas of blemishes in the glass itself.

Stanley,screwdriver, pocket, 3" shank length, 3/32" slotted tip, 5-1/2" overall

Hartford, Wisconsin, United States
US $3.27
Jan 29th

1/2" core box round fluting router bit; full cove cut, 1/2" shank, carbide tip,

Vernon-Rockville, Connecticut, United States
US $3.99
Jan 30th

Brand new, never used 1/2" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

1/4" core box round fluting router bit; full cove cut, 1/2" shank, carbide tip,

Vernon-Rockville, Connecticut, United States
US $3.75
Jan 30th

Brand new, never used 1/4" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

3/8" core box round fluting router bit; full cove cut, 1/2" shank, carbide tip,

Vernon-Rockville, Connecticut, United States
US $3.99
Jan 30th

Brand new, never used 3/8" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

5/8" core box round fluting router bit; full cove cut, 1/2" shank, carbide tip,

Vernon-Rockville, Connecticut, United States
US $3.99
Jan 30th

Brand new, never used 5/8" diameter cove box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters up to a depth equal to the diameter of the bit leaving a long channel as in round fluted trim. Bit fits all 1/2" shank portable and table routers.

3/8" round nose core box router bit; deep cove cut, 1/2" shank, carbide tip tct

Vernon-Rockville, Connecticut, United States
US $4.19
Jan 30th

Brand new, never used 3/8" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 3/8" wide fluted channel can be made up to 11/16" deep with this bit.

1/4" round nose core box router bit; deep cove cut, 1/2" shank, carbide tip tct

Vernon-Rockville, Connecticut, United States
US $3.89
Jan 30th

Brand new, never used 1/4" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 1/4" wide fluted channel can be made up to 5/8" deep with this bit.

1/2" round nose core box router bit; deep cove cut, 1/2" shank, carbide tip tct

Vernon-Rockville, Connecticut, United States
US $4.19
Jan 30th

Brand new, never used 1/2" diameter round nose or core box router bit with carbide cutting edges and 1/2" shank. These bits are used to make half round coves of varying diameters, but unlike a true cove box bit, a round nose bit will extend into the piece farther than the horizontal cut radius. The resulting 1/2" wide fluted channel can be made up to 11/16" deep with this bit.

Stanley,screwdriver, pocket, 2" shank length, #0 phillips, 4-1/2" overall

Hartford, Wisconsin, United States
Jun 5th

Matfer bourgeat 166010 cake decorating tubes

Monsey, New York, United States
Jun 7th

39/64 oversize reamer cutter tool .612" diameter pilot tip spiral flute usa

Grand Rapids, Michigan, United States
Jun 8th

Item ..................... High speed steel Reaming Cutter Manufacturer .... Mohawk Tool Corp Made in the US America Diameter ............

Crl rea-c-h three section 12' extension pole

Hallandale, Florida, United States
Jun 19th

Get Expert Advice -> Save Time and Money On Average we deliver 30% Savings to Our Customers

Crl rea-c-h two section 8' extension pole

Hallandale, Florida, United States
Jun 20th

Get Expert Advice -> Save Time and Money On Average we deliver 30% Savings to Our Customers

9/64 solid carbide chucking reamer cutter 3.56mm metric cut ream tool tin coated

Grand Rapids, Michigan, United States
US $9.99
Jan 30th

Location top shelf gray rack in box near transistors Item ........................ 4 Fluted carbide reamer with Spiral Flutes

17/32 tipped drill bit

Frankfort, New York, United States
Jan 30th

17/32 drill bit for a machinist. looks like a tip was brazed in possible carbide but this is not my area of expertise.

Spiral taper reamer ntc 3°x1.509x1.373 cnc lathe machinist 6 flutes shaft 1 1/4"

Pittsburgh, Pennsylvania, United States
Jan 30th

679 3?X1,509X1,373 stamped on the shaft. Shaft size: 2-1/2" long X 1-1/4" OD. Overall length 11-1/2" At the tip 1-3/8" diameter at its widest point.

Mixed lot of 3 hand taps, 5/16-18 nc, 3 flute, fluted spiral, regal, emuge

Rochester, New York, United States
US $7.99
Jan 30th

High Speed Hand Taps For sale is one mixed lot of 7 High Speed Hand Taps, model # 5/16-18 NC in various formats from various manufacturers (detailed below). Items are used, absent original packaging. Items may show signs of shelf wear, including minor scratches, scrapes, minor discolorations and/or markings which are cosmetic only and have no affect on the items' function.

Mixed lot of 6 plug hand taps, 5/16-18 nc, hs, gh-3, +.005, 2 flute, usa

Rochester, New York, United States
US $9.99
Jan 30th

Plug Hand Taps For sale is one mixed lot of 6 Plug Hand Taps, model # 5/16-18 NC HS GH3 +.005 in various formats from various manufacturers (detailed below). Items are used, absent original packaging. Items may show signs of shelf wear, including minor scratches, scrapes, minor discolorations and/or markings which are cosmetic only and have no affect on the items' function.