This is a Bison 3 Jaw chuck, 6.25" actual diameter. Through hole is 1.65", so you can get a 1 5/8" rod through the headstock. This is a quality chuck rated at 4500 RPM, which is double the speed rating of most cheaper chucks.
This is a Brand New Shop Fox / Steelex 4" Rotary Table with a 3-Jaw x 3-1/4" Chuck on Back Plate, an extra Set of Jaws, a Set of Clamps, all in a Beautiful Wooden Storage Case.
Used 8" Hartford Super Spacer with 24 notch master plate. Included with the spacer are six more plates; 3 notch (x1), 4 notch (x1), 6 notch (x1), 12 notch (x2), 3 replacement chuck jaws, 1 tailstock, and 2 chuck keys. Serial No-11437.
recent find: RARE ANTIQUE 1910 Chas Parker machinist vise #205 This is in good shape overall, everything moves freely. Very heavy (approx 100 lbs) 21" long, The base from ear to ear is 12". It is 12" high.
ESTATE FIND For sale is a vintage Hollands #14 bench vise. The 1 indicates a fixed/non-swivel base and the 4 indicated a 4 inch wide jaw. Each 1/2 of the the vise has matching serial numbers of 354.
Note:The first two photos showing the moving jaws are not correct. The moving jaw that comes with this set does not have the 4 vertical "T" slots shown. ************************************** Original Price Of This Angle Jaw Set Was $329-Until The New Configuration &nb
Clausing L00 mount chuck, 8" 3 jaw. Both inner and outer jaws are included, in very good to excellent condition. Jaws move smoothly throughout their range.
10" Diameter Lathe Chuck with a 4" Through Hole. We removed the jaws and cleaned out the scroll and replaced them and they turn in and out fairly smoothly. There is a slight drag at the same point on the scroll.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.