m5 8 screw for sale, brand-new and used.

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$ "ZIP TIE CABLE STRAP 2 WAY SADDLE MOUNT 100PCS" "SECURE YOUR CABLES, MAKE YOUR WORK LOOK CLEAN" "DONT FORGET TO CHECK OUT OUR ZIP TIE WRAPS AND ZIP TIE WRAP GUN"""""" DETAILS/FAQ'S INFO:(*****) -Quantity 1 PACKAGE CONTAINING 100 PCS -FITS CABLE TIES UP TO 5/16" (8mm) IN WIDTH. -ADHESIVE BACKING CONFORMS TO ALL INDUSTRIAL STANDARDS. -DIMENSIONS 5/8"(14mm)w x 7/8" (23mm)l x 3/8" (10mm)h

Here is a new pair of Carl Walter metric crimping pliers. Carl Walter number 4390. Made in Germany.

This is an auction for a NEW 90 Amp Heavy Duty Pushbutton Circuit Breaker with Screw Terminals, Zing Ear model # ZE-700L-MH-90. This Circuit Breaker is a Push to Reset Type, Rated at 90 Amps @ 50V DC/125V AC/250V AC. This Circuit Breaker is New Old Stock (N.O.S.) from a bulk case with no retail packaging.

12 DV 110LB 50kg Electric Lifting Magnet Holding Electromagnet Lift Solenoid Type: ZYE1-P50/27 Lifting Force:500N Weight:300g Input Voltage:12VDC Power Consumption: 10W Thread Size: M5 (mounting screw included) Diameter:50 mm Height:27 mm Material: Metal Color: Silvery Compact and Construction Lifts steel /iron ha

12 DV 55LB 25kg Electric Lifting Magnet Holding Electromagnet Lift Solenoid Model: ZYE1-P40/20 Lifting Force:250N Weight:130g Input Voltage:12VDC Power Consumption: 8W Thread Size: M5 (mounting screw included) Diameter:40 mm Height:20 mm Lead Length: 7" Material: Metal Color: Silvery Package:1 Holding Electromagnet Compact and Construction Lifts stee

This listing is for a used SI0V-B60K150 MOV. This has the disk-shape design and a flame retardant in the housing and potting.Has M5 screw terminals. (Screws NOT included) RATINGSVrms - 150Vdc - 200Imax (8/20us) - 70kAWmax (2ms) - 570Vv (1mA) - 240VDelta Vv - 10%Max Clamp Voltage - 395V 500ACtyp - 12000pFTa - 85C This component has only been tested for no-short conditions ONLY.

Please read carefully before you bid/buy Auction for 1 Item Rack module 1.5 500mm/19.68" (rack available in 500,1000 & 1500mm please see other auction) 1 Item Pinion/Gear module 1.5 26 teeth (pinion available in 20, 26 teeth please see other auction) Rack catalog no. CN-RK01 Material 1045 Steel Pressure angle 20° All racks come pre-drilled (S)

Series LECP6 controller has two available modes for the setting software and teaching box.? In the easy mode, the operation can be started by only setting the speed, position, etc.? Using the normal mode allows a further detailed setup.??A few of the?main functions of the LECP6 controller are actuator control, specified force operation, separated power supply, and returning the actuator to the home position by sending a single signal to a dedicated terminal.

Products Description: 20pcs Z-M5-2.5 Steel Plated with Zn Floating Nuts standard Fastener

The item available here is a used R + W TORQUE LIMITER WITH CLAMPING HUB that appears to be in EXCELLENT CONDITION. This item has not been tested and it comes with a 14 day return policy from the date the item was shipped, EXCEPT INTERNATIONAL SHIPPING. Postage is not covered.

Baldor electric servo motor, catalog #BSM100B-2250AAX, BSM100B-2250AA, S4P004W031G1, spec #S4P004W031G1, new spec #S4P100W031G1, rated speed 1200rpm, with resolver, with thermostats, servo motor, 230/460volts, 1200 rpm, 3 phase, 60 hz, TENV, 3ph, 230/460vac, Baldor, BSM100B-2250AA, continuous stall torque 12nm, torque cont. stall 12nm, current cont, stall 6.08 amps, rated buss voltage 300vac, rated speed 1200rpm, peak current 16 amps, Cont.

I googled the patent number and found the following info. The figures on the patent sketches looks slightly different than the piece. Patent number: US 3497806

1643UC1F.34 New Chomerics (Division of Parker Hannifin), Cho-Seal / Choseal, Electro-Conductove / Electro Conductive / Electromagnetic Interference (EMI) Shielding, Silicone Rubber Gaskets / Washers, Part Number 19-04-22222-12730-30, Customer Part Number RF401878. Each bid quantity is for a Lot of One Hundred (100) Pieces. You may bid / buy any number of lots, up to the total quantity available above.

var itemNumber = window.ebayItemID ?

M5 - 0.8 x 16mm - Zinc Hex Head Cap Screw / Bolt - DIN 933 Class 8.8 - 5 Pieces This product is new old stock; it therefore does not come with original packaging or with paperwork. See above information and photos for detail. As always feel free to ask any questions you may have.