machined washer for sale, brand-new and used.

FastBack Interchange System Based around the patented FastBack Bolt, this quick-change system allows the jaw to be changed in 3 strokes! This greatly increases productivity by reducing vise change setup time. rnrn The jaws change easily without opening the vise or fastening bolts mo

May be used as a spindle-adapter for a wood lathe from LatheCity Morse Taper #3 two in one

BRAND NEW OVER 50 PCS AVAILABLESIZE 1" LENGTH 18"EXTERNAL BRAIDING: STAINLESS STEEL 304CRIMPING FERRULES: STAINLESS STEEL 304CONNECTORS: MACHINED BRASS/ NICKEL PLATED BRASSFIBER GASKET: BA-U FIBER WASHER CORE: FORMULATED EPDM

This Designer Kit is for RF MMIC Amplifier with SOT-89 package. Size of the PCB 1"x1"x0.031", FR-4 material, double-sided with solid plated ground plane on the back. The layout also includes input/output DC coupling capacitor 0603 size, RF choke and drop resistor, de-coupling capacitors and voltage regulators (78M08 for 8V or 78M05 for 5V in DPAK package).

This Designer Kit is for RF MMIC Amplifier with 2-stage SOT-89 package for higher output power with heatsink. Size of the PCB 1"x1"x0.031", FR-4 material, double-sided with solid plated ground plane on the back. The layout also includes input/output DC coupling capacitor 0603 size, RF choke and drop resistor, de-coupling capacitors and voltage regulators (78M08 for 8V or 78M05 for 5V in DPAK package).

Category: High Pressure Line: Plugs, Sockets & Couplers Model #: 9.802-164.0 Shipping Weight: 3 oz.

WE OFFER ONLY TOP OF THE LINE INDUSTRIAL EQUIPMENT - FREE SHIPPING! Pressure Washer Stainless Steel Male QD 3/8" Socket Coupler X 3/8" Fip Quick Connect Couplings are machined from top grade materials to the same exacting specifications as the high cost performance leaders. We have gone a step further to ensure that Legacy Quick Couplers can withstand high temperature, high pressure and aggressive chemicals by including EPDM o-rings as standard on female QD's.

SET OF 24 TOP GRADE, RUGGEDIZED, HIGH TEMPERATURE, ELEMENTALLY HARDENED, PRECISION TOLERANCE, N48H NEODYMIUM, RARE EARTH, PERMANENT MAGNETS This auction is for an entire set of 24 magnets. The dimensions of each magnets is 2 inches long x 1 inch wide x 5/16 of an inch thick. They are magnetized through their thickness for use in windmills, generators, magnet motors, alternators, etc.

SET OF 12 TOP GRADE, RUGGEDIZED, HIGH TEMPERATURE, ELEMENTALLY HARDENED, PRECISION TOLERANCE, N48H NEODYMIUM, RARE EARTH, PERMANENT MAGNETS This auction is for an entire set of 12 magnets. The dimensions of each magnets is 2 inches long x 1 inch wide x 5/16 of an inch thick. They are magnetized through their thickness for use in windmills, generators, magnet motors, alternators, etc.

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer

New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side

This is an Exhaust Rocker Arm & Pin Kit For the 2 1/2 & 3 Hp Waterloo Boy Gasoline Engines. This fits Applications Where The exhaust Rod Does Have An Adjuster On It ..... Most of the Actual Waterloo Boy Engines Have the Adjuster on The End of the Exhaust Rod, The "Contract Engines" Usually Don't This fits The Waterloo Boy Engines Or The Engines That Have An Adjusting Bolt On The end Of The Exhaust Rod............

This is an Exhaust Rocker Arm & Pin Kit For the 2 1/2 & 3 Hp Waterloo Gasoline Engine Co. Engines. This fits Applications Where The exhaust Rod Does not Have An Adjuster On It .....

For sale here is a brand new set of machined 304 stainless steel tubing spouts. These spouts are made for a 5/16" tap hole as well as for connecting 5/16" tubing to them to be used with any gravity or vacuum system as well as with a drop line for adding a second tap into a bucket or a sap sack. They are machined from 304 stainless steel and have a solid shoulder machined into the spout shaft with a holding washer (also 304 stainless) that is pressed on from the back side.

For sale here is a set of 20 brand new 5/16" diameter stainless steel maple sap / syrup spouts / spiles that are made to use with buckets. They are machined from 304 stainless steel and have a holding washer (also 304 stainless) that is pressed onto the spout from the back side up to a shoulder that is machined into the spout shaft for a solid holding ring.

New Pressure Washer Dual Rollover Nozzle Machined Brass Double Nozzle Head with Heavy Nickel Plating Stainless Steel Ball Chemical Resistant 3600 PSI max pressure 300 degree Fahrenheit max temperature 1/4" female inlet, 2 female outlets

Giant Products Pressure Washer Safety Relief Valve5000 Max PSI - 3/8" NPT with Blue Spring New from bulk package with no manufacturer retail packaging as shown in pi

3/8" Quick Connect Fittings 3 Sets for Pressure Washer Both have female connections for 3/8" american tapered pipe thread. The Brass Socket Is Top Quality Legacy Brand. Working Pressure: 4,500 PSI • 3 pc: 3/8 FPT Steel With Zinc Plated Rust Coating quick coupler plug • 3 pc: 3/8 FPT Brass quick coupler socket Stainless Steel band