machined washer for sale, brand-new and used.

Karcher, Hotsy, Shark Pressure Washer Male 3/8" Plug X 3/8" Fip Stainless Steel last much longer than brass. Harder metal will not rust or allow for the ball bearing in the female socket to indent this fitting. Specifications: 3/8" Stainless Steel Nipple, Male Chemical Resistance 303 Stainless Steel 5500 PSI Industrial Grade Legacy quick connect couplings are machined from top grade materials to the same exacting specifications as the high cost performance leaders.

SET OF 24 TOP GRADE, RUGGEDIZED, HIGH TEMPERATURE, ELEMENTALLY HARDENED, PRECISION TOLERANCE, N48H NEODYMIUM, RARE EARTH, PERMANENT MAGNETS This auction is for an entire set of 24 magnets. The dimensions of each magnets is 2 inches long x 1 inch wide x 5/16 of an inch thick. They are magnetized through their thickness for use in windmills, generators, magnet motors, alternators, etc.

SET OF 12 TOP GRADE, RUGGEDIZED, HIGH TEMPERATURE, ELEMENTALLY HARDENED, PRECISION TOLERANCE, N48H NEODYMIUM, RARE EARTH, PERMANENT MAGNETS This auction is for an entire set of 12 magnets. The dimensions of each magnets is 2 inches long x 1 inch wide x 5/16 of an inch thick. They are magnetized through their thickness for use in windmills, generators, magnet motors, alternators, etc.

For Auction - 1 - Landis, Landmatic Die Head. This is surplus from a machine shop that we purchased. We have sold two of these prior to this one and it appears to be generally complete.

Lot of 4pc - New J&S Model #101BDouble Action Jaw - Edge Clamp P/N 20102Dimensions 3/4"H x 1-1/2"W x 3-3/8"OALTapered Slot For 1/2" Or M12 SCHSClamping Range Stroke From AOL +/- 1/8"Adjustment Screw 1/2" With 1/4" HexTorque (Lbs In) = 620Clamping Force (Lbs) = 1000Includes Washer For Hold Down Bolt andAluminum Nose Cover For Clamping On Finished Work Peices J&S Tool is hard to be beat when it comes to power holding, low profile design, and dependability. Only one adjusting screw provid

I THINK THIS IS THE OLDER MODEL 32 (30301)NEEDS THE "Y" LEADSCREW,HANDLE,SHIM WASHER, & TORRINGTON TYPE BEARINGS. GOOD SHOP PROJECT WEB INFO: Model: 9630301 The Palmgren Cross Slide Vise provides quick and precise positioning along the X and Y axes. This gives your drill press movements and posi

May be used as a spindle-adapter for a wood lathe from LatheCity Included: Morse Taper #2 (MT2) to 1"-8 TPI (x1.5" thread length), steel, 1/4-20 drawbar, RH threads + nut and washer

Delta shaper 1" spindle made from an import generic part and machined to fit the Delta USA made Heavy Duty shapers 1" spindle has the rigidity required for panel raising and other wide diameter or tall cutters. -Includes draw bar, draw bar nut, 1" spindle machined to fit Delta Heavy Duty USA shapers. -Compatible with all Delta Heavy Duty heavy duty shapers manufactured prior to 2005.

New billet aluminum replacement rear clamp block for your Delta Unisaw fence This is a replacement clamp block for the rear of the early style Unisaw fence. The early style fence is shown in photo #2. This fence is identified by the presence of the small rear clamp tighening knob above the lever lock at the operator side

For Sale is a :Detrex Vapor Degreaser Detrex Vapor Degreaser is used, but is in great working condition. Stairs not included. UNIT WAS RUNNING FINE, REPLACED WITH NEW FULLY AUTOMATED UNIT.

Main Description You are bidding on one hughes Aircraft Precision Variable Orifice CO2 Jet Spray Cleaning. Besides some very minor cosmetic scratches and scrapes to the unit is in excellent condition. The nozzles have an etching in them, but this will not affect its function.

For sale here is a set of 100 brand new 5/16" maple sap spiles or spouts that are machined from 304 stainless steel. They are made to use with the common metal style sap sack holders or buckets with a 3/4" inch or larger diameter hole. You can also use them with sap buckets that have a smaller hole by sliding a bucket hook over the spout before you drive it in the tree.

This is an Exhaust Rocker Arm & Pin Kit For the 2 1/2 & 3 Hp Waterloo Boy Gasoline Engines. This fits Applications Where The exhaust Rod Does Have An Adjuster On It ..... Most of the Actual Waterloo Boy Engines Have the Adjuster on The End of the Exhaust Rod, The "Contract Engines" Usually Don't This fits The Waterloo Boy Engines Or The Engines That Have An Adjusting Bolt On The end Of The Exhaust Rod............

This is an Exhaust Rocker Arm & Pin Kit For the 2 1/2 & 3 Hp Waterloo Gasoline Engine Co. Engines. This fits Applications Where The exhaust Rod Does not Have An Adjuster On It .....

For Sale is a Legacy GM series HD pressure washer pump. New from the factory. This cross references to a General TX-1812s17 or an AR XM15.15 GM Series (L) Legacy HD Pumps - belt drive unit Applications: Legacy is introducing the next wave in high-pressure pum

For sale here is a brand new set of machined 304 stainless steel tubing spouts. These spouts are made for a 5/16" tap hole as well as for connecting 5/16" tubing to them to be used with any gravity or vacuum system as well as with a drop line for adding a second tap into a bucket or a sap sack. They are machined from 304 stainless steel and have a solid shoulder machined into the spout shaft with a holding washer (also 304 stainless) that is pressed on from the back side.

For sale here is a set of 20 brand new 5/16" diameter stainless steel maple sap / syrup spouts / spiles that are made to use with buckets. They are machined from 304 stainless steel and have a holding washer (also 304 stainless) that is pressed onto the spout from the back side up to a shoulder that is machined into the spout shaft for a solid holding ring.

Buyer receives one (1) spacer, shown in the first photograph. The spacer measurements are 24.5mm O.D. X 9.76mm I.D.

YOGURT HEAVY DUTY MIXING MACHINE Combine this with a ice cream dipping cabinet or sandwich prep table and you are in business. Makes a great profit generator for your existing business