nitrogen fittings for sale, brand-new and used.

This regulator has fittings for a Hall type, nitrogen driven, surgical handpiece. Originally $265.00

McDantim TM200 Gas Blender New McDantim TM200 gas blender for draft beer systems. Mix your own nitrogen and CO2 blends instead of purchasing expensive Beer Gas cylinders. Standard configuration is 25/75 CO2/Nitrogen on one side for stout beers, 60/40 CO2/Nitrogen on the other outlet for lagers and 70psi delivery pressure, but we can set the percentages and pressures as whatever your system requires.

This Sale Is For A Rotameter Flow Meter For Measuring 20-200 Liters Of Nitrogen With Included Adjustable Level Sensor. It Is Set Up With 3/8" Compression Fittings But That Is Changeable. This Item was removed from a fully functioning piece of laboratory equipment In Excellent Condition and is guaranteed to work.

1.Main Technical Parameter Type Purity of Gas Output Flow Output Pressure Input Pressure Input Outflow Power Required The biggest power consumed

Concoa 6500 Series Single Stage Nitrogen Gas Regulator 805-6555 - 3000 PSI

SVO-501 4.6 cubic foot Vacuum Drying Oven Interior Dimensions: 18” W x 18” H x 24” D Exterior Dimension: 26” W x 65”H x 36” D Temperature Range: 5? C above ambient to +150?C Temperature Uniformity: ± 6% of Set point Vacuum Level: > 15mTorr @ 150 °C Temperature Controls: Watlow EZ Zone PM Programmable Microprocessor with Ramp & Soak Capabilities. Save up to 4 profiles in controller memory.

GLOBAL MODULAR AUTOMATIC NITROGEN CONTROLLER, VERY NICE CONDITION. GENERAL INFORMATION ABOUT THE CONTROLLER. Help to prevent contamination inside of the Desiccators Chamber with 1/4" line of nitrogen continually monitoring set point and keep low humidity (low as 0% R/H).

Amerex 451 wheeled 150 lb Commercial Dry Chemical Fire extinguisher with Nitrogen tank. Brand new Unit. The dolly handle is bent downwards ( wreight damage) As shown on pictures.

This is a pre-owned Peak Scientific Nitrogen & Air Generator Model ANG 400/2 with a maximum pressure of 145 PSI or 10 barg Upon inspection, all tubing, valves and fittings are in excellent condition. Upon powering on, the pressure rises, I couldn't test it further due to the lack of nitrogen and air outlet. Please refer to the pictures and all inquiries are welcomes.

CGA-580 ARGON C25 Regulator Inlet NUT & 3" NIPPLE Fittings - NITROGEN HELIUM a.imagelink {color:#0000FF;} a:hover.imagelink {color:#0000FF;} a:visited.imagelink {color:#800080;} a.imagelink img.auctionimage { border: 2px solid #0000FF; } a:visited.imagelink img.auctionimage { bo

1/4 x 3/8 x 25ft minisplit Insulated Copper Lineset-Made in the USA

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily.

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily.

Blue Monster PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429" roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily.