nitrogen valve for sale, brand-new and used.

Automatic Liquid Nitrogen - level control system in very good condition. Purchased 2014 from distributor - Finemech, Inc Included: KGW-2703 - ALU-CD 35 Aluminum Container for liquid nitrogen. Capacity 35 liters KGW-1305 - LN2 Siphon with magnetic valve for ALU KGW-2607 - Filling transfer hose 2 metres (union nuts) 502.00 502.00T KGW-1301 - Liquid Nitrogen Level Controller with 2 x PT100 temp probes Dewar is in very good condition and oter items are newer used

Beer Blast Nitrogen generator / Gas Blender with white holding tank and nitrogen regulator for auxiliary cylinder. Very low hours on generator that still looks new. Included is a Liquid Co2 holding tank with Co2 switch valve and filter assembly for the best tasting draft beers and soda possible.

Delta Design Environmental Test Chamber * Laboratory Oven * N2 Cooling * Tested Delta Design Environmental Test Chamber * Laboratory Oven * N2 C

Texol GeniSys Nitrogen Generator - LCMS 60 litres/min This unit was removed from a working lab environment, has been stored indoors and is clean and ready to use. This unit weighs 150 lbs, plus crating, so it will have to ship freight. Actual shipping cost will need to be calculated before invoicing at close of auction.

Supco JV1 "Jones Valve" Condensate Drain Blow Out Valve - NEW! The Jones Valve is a simple condensate drain line blow out valve that is inexpensive and easy to use. No more water buckets, no more looking for the other end of the line to install your plug.

NEW ASCO RED-HAT SOLENOID VALVE 8263G209LT ASCO Red-Hat 2 way, normally closed, direct acting, cryogenic service solenoid valve, brass body, 1/4" FNPT end connections, Cv=0.7, urethane, PTFE and/or copper seats and seals, 120 VAC 60Hz (110 VAC 50Hz) class F coil, Type 1 (and 2/3/3S/4/4X) enclosure with 18" leads and 1/2" FNPT conduit connection.

Auction is for 1 ea of a Pneumatic Ball valve with 1/4" OD push in fitting ends. Great for all sorts of pneumatic circuits and projects that require isolation or shut off. Rated for Compressed Air and Nitrogen Pressure range 0-100 PSIG Item comes with our 30 day no questions asked warranty.

For your consideration is a new AirGas Y12-244F580 Analytical Specialty Gas High Purity Regulator with Needle Valve *Gas Service: Argon, Helium, Nitrogen Model: Y12-244F580 Specialty Gas High Purity Regulator Gauge Dials are 2 3/4" Specs: This analytical series of high-purity brass, two-stage regulators is recommended for non-corrosive analyticaland process applications where precise pr

NovaSwiss offers high pressure Compressors and quality Needle Valves for application from 700 bar up to 7000 bar with high safety and reliable function. High pressure pneumatic valves and Tubes provided by NovaSwiss will suit for applications of Nitrogen Gas Injection

Unitek EAPRO / MicroJoin B-2100-A Hot Bar Bonder for ACF/LCD/PCB/Flex Bonding and Rework Comes with a manual and what you see in the pictures. If you don't see it, you probably wont get it. Specifications are from MicroJoin and may vary slightly due to upgrades, options, or revisions this unit may or may not have.

Varian Auto-Test 948 Leak Detector. The unit powers up and seems to function properly. Below is some information on the unit that was located on the web: This Varian 948 series leak detector has been specifically designed for high productivity testing environments.

FisherBrand CGA540 Nitrogen Gas pressure regulator Catalog No.: 10-575-144 10-575-144 Regulator, Cylinder; Fisherbrand; Multistage; Outlet needle valve with 1/4 in. NPT male thread; For oxygen; Max. Inlet Pressure psig (MPa): 3000 (20.7); Delivery Pressure Range psig (MPa): 1-40 (0.006-0.27); CGA: 540

Nitrogen Regulator Pressure Propane Natural Gas Reader Gauge Valve Meter New!!! Sturdy metal cylinder composed diaphragm Nitrogen Regulator with a Delivery Pressure 0-400 PSI for cleansing and weight testing aerating and cooling and refrigeration frameworks. Controller with Cga580 gulf association, 1/4 inch male flare outlet association, self re-seating alleviation valve (not intended to ensure downstream framework) and simple to peruse 2 inch Contents Gage 0-4000 PSI (Part No.

Fisher Scientific Regulator FS-100 with gauge used but in good condition. Specification: FS-100 regulator use no oil Gauge BU-2581-AQ, 0-4000psi, 0-28,000 Kpa Argon-Hilium-Nitrogen CGA 580 fitting Whitey B42F2 valve Please see photos for more information.

Beer Shutoff Valve check valve with 1/4" thread x 5/16" barb

Brand new wall mount high pressure dual gauge Co2 regulator. Comes complete with changeover valve and high pressure tubing. Could also be used for mixed gas or nitrogen.

Helium Balloon Inflator features:Convenient hand tight cylinder connection for easy set-up and switch overs. Item #692P CGA580 Cylinder content gauge 3000 PSIG provides full-to-empty status. Tilt valve inflator for fast and efficient filling of balloons.Durable, solid brass piston.

New hydraulic accumulator filling or bleeding valve , carrying case and charging hose to connect to nitrogen tank. 3000 psi. Liquid filled gauge.