CLAUSING 5900 - 144 Compound Slip Clutch Gear Assembly, consists of 5900-145 & 341-226 gears along with 2 clutch plates, 6 steel ball bearings, gear hub, lock washer and nut. Gears are in excellent condition and the bushing seems to be a good fit on dowel pin so it can probably be put right to work. Contact me with any questions.
CLAUSING 5900-75 Dog Gear Assy. with bushing in excellent condition; bushing has a tolerable fit over dowel pin, both sides of gear are identical. Contact me with any questions.
Tricks & Secrets of Old-Time Machinists: Hints and Kinks Provided by the Readers of American Machinist Magazine in 1915, originally published in American Machinist Magazine, compiled, edited and published by Lindsay Publications, 2009. 5 1/2 x 8 1/2 paperback, 96 pages. ISBN 1-55918-383-7.
Drill Jigs – Principles of Design – Examples From Practice- Dimensions of Jig Bushing, Third Edition, Machinery’s Reference Book No. 3, originally published by The Industrial Press, New York, NY, 1913. Reprinted by Nation Builder Books, Leesburg, VA, 2005, 5 1/2 x 8 1/2 softcover, 56 pages.
I am offering (2) holders, both are included for one price: They are manufactured by EWS Tool Technologies Group/Command (German precision made) 40mm diameter VDI shank that is 63mm long One with a 1.25" bushing and a 1" bushing on the other. 40mm (1.5") diameter bore hole to hold removable bushings or tools 90mm projection head Locating/lock pin One of them has the Thru-Coolant option. One of them has the threaded access cap and adjustable 'stop' at the top of the shank.
Manufactured by Global CNC Industries (Made in the USA) 40mm diameter VDI shank that is 63mm long 1" capacity bushing included 40mm (1.5") diameter bore hole to hold removable bushings or tools 90mm projection head length Locating/lock pin This turret tool came from a Daewoo Puma 250 CNC Lathe but will fit on many other manufacturers and models. Questions? (262)895-3462 or sales@mwmachinery.com Than
SUNNEN HONING MANDREL # 4PL-1219 MANDREL IS IN EXCELLANT CONDITION, STONES ARE USABLE BUT ALMOST WORN-OUT, NO RUST, VERY CLEAN, USED VERY LITTLE, SHOES VERY GOOD, OVERALL LENGTH UNDER HEAD = 17" EFFECTIVE DIA RANGE: 1.209 - 1.281 INCHES 30.7 - 32.5 MM EXCELLANT SUNNEN MANDREL 4PL-1219 FOR PISTON/KING-PINS OR FOR HONING ANY BUSHING/HOLE&n
SUNNEN BUSHING EXPANDER CON-ROD PISTON-PIN END HONING MANDREL # 1.020 MANDREL IS IN EXCELLANT USED CONDITION, NO STONES, NO RUST, VERY CLEAN, USED VERY LITTLE DIAMETER RANGE: 1.020 - 1.062 INCHES 25.9 - 26.9 MM NEAR PERFECT SUNNEN MANDREL 1.020 FOR ROD BUSHINGS/PISTON PIN END OR FOR HONING ANY BUSHING/HOLE WITHIN THE HONE RANGE
Manufactured by EWS Tool Technologies Group/Command (German precision made) 40mm diameter VDI shank that is 63mm long 1" capacity bushing included 40mm (1.5") diameter bore hole to hold removable bushings or tools 90mm projection head length With Coolant-Thru option It has the threaded access cap and adjustable 'stop' at the top of the shank. Locating/lock pin hole This turret tool came from a Daewoo Puma 250 CNC Lathe but will fit on many other manufacturers and models. Questions?
These 3 Ton Press Bars used flat (4 Ton used on edge), measuring 1/2" X 3/4" X 4.25, were designed for use on a 3 ton arbor press where they support 6000 lbs. over the anvil wheel slot span of 2” or less. These FULLY GROUND matched bars are handy for other uses such as set-up blocks and shims.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
