+ Post new Ad
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA, US $19.00 – Picture 0
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA, US $19.00 – Picture 1
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA, US $19.00 – Picture 2
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA, US $19.00 – Picture 0
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA, US $19.00 – Picture 1
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA, US $19.00 – Picture 2

Precision Cast Iron Angle Plate 5 X 5 X 4 1/4 Made In Usa

US $19.00

  • Warrington, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
PRECISION CAST IRON ANGLE PLATE 5 X 5 X 4 1/4 MADE IN USA. One face has step to hold mounted item Parallel  Each face is Square and Flat. This Item is NOT an import. Location D 5  Any Questions Call and Ask for Dave Phone Number Two One Five-Three Four Three-Thirty Nine Sixty Six.

Directions

Similar products from Fittings & Plates

Angle Bracket Cap 8 40x40, black ITEM No.: 0.0.411.26

Angle Bracket Cap 8 40x40, black ITEM No.: 0.0.411.26

  • Washington, North Carolina, United States
  • Jan 30th
Pair of V Blocks 1-1/2 x 5 Inches (Inv.23714)

Pair of V Blocks 1-1/2 x 5 Inches (Inv.23714)

  • Portland, Connecticut, United States
  • Jan 30th
Hardinge H-0 Indexer w/32 Position Index Plate

Hardinge H-0 Indexer w/32 Position Index Plate

  • Loves Park, Illinois, United States
  • Jan 30th
Hardinge H-4 Indexer w/22 Position Index Plate

Hardinge H-4 Indexer w/22 Position Index Plate

  • Loves Park, Illinois, United States
  • Jan 30th
Mitutoyo Compound Sine Vise Model 644 (Inv.21628)

Mitutoyo Compound Sine Vise Model 644 (Inv.21628)

  • Portland, Connecticut, United States
  • Jan 30th
Vacuum Table 48" x 24" for CNC Routers VTZ4824Grid

Vacuum Table 48" x 24" for CNC Routers VTZ4824Grid

  • Exeter, Rhode Island, United States
  • Jan 30th
SAMSOMATIC TOOLING ACTF23LX NEW

SAMSOMATIC TOOLING ACTF23LX NEW

  • Yale, Michigan, United States
  • Jan 30th
Electrogrip Electro Magnetic Chuck Fixture chkHTIbot1 CHKHTIBOI2

Electrogrip Electro Magnetic Chuck Fixture chkHTIbot1 CHKHTIBOI2

  • Beltsville, Maryland, United States
  • Jan 30th
ZM ZA10MT-316 316SS SEAL BACK-PLATE GOULDS 10'' 3196

ZM ZA10MT-316 316SS SEAL BACK-PLATE GOULDS 10'' 3196

  • Clover, South Carolina, United States
  • Jan 30th
LX5613.222.00.03 2-1/2' X 2-1/2" X 2" Fixture

LX5613.222.00.03 2-1/2' X 2-1/2" X 2" Fixture

  • Peoria, Illinois, United States
  • Jan 30th
NEW PANDUIT UICFPSE2EI MINI-COM 2 POSITION C EXECUTIVE VERTICAL SLOPED FACEPLATE

NEW PANDUIT UICFPSE2EI MINI-COM 2 POSITION C EXECUTIVE VERTICAL SLOPED FACEPLATE

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Unused Reid Supply LO-136 Round, Slip Fit Lock Screw Type Locating Pin

Unused Reid Supply LO-136 Round, Slip Fit Lock Screw Type Locating Pin

  • Bristol, Connecticut, United States
  • Jan 30th
Part Locator

Part Locator

  • Peoria, Illinois, United States
  • Jan 30th
NEW FACTORY SEALED THE SIEMON COMPANY MX-FP-S-04-02 MAX FACEPLATE SINGLE GANG

NEW FACTORY SEALED THE SIEMON COMPANY MX-FP-S-04-02 MAX FACEPLATE SINGLE GANG

  • Cedarburg, Wisconsin, United States
  • Jan 30th
Jergens 29313 Collared Locating Pin

Jergens 29313 Collared Locating Pin

  • Peoria, Illinois, United States
  • Jan 30th
Jergens 29335 Collared Locating Pin

Jergens 29335 Collared Locating Pin

  • Peoria, Illinois, United States
  • Jan 30th
HUBBELL 8.5 CU. IN 8.5 ELECTRIC ENCLOSURE PLUS HOLE CAP ***NNB***

HUBBELL 8.5 CU. IN 8.5 ELECTRIC ENCLOSURE PLUS HOLE CAP ***NNB***

  • Reidsville, North Carolina, United States
  • Jan 30th
ROBOT RISER

ROBOT RISER

  • Almont, Michigan, United States
  • Jan 30th
END FORM SUPPORT CLAMP NC-4005~ CHECK OUT MYREWARDS =CASH BACK

END FORM SUPPORT CLAMP NC-4005~ CHECK OUT MYREWARDS =CASH BACK

  • New Paris, Indiana, United States
  • Jan 30th
RED HEAD HEALD GRINDING SPINDLE UNIT # 411-110200 CINCINNATI MILACRON

RED HEAD HEALD GRINDING SPINDLE UNIT # 411-110200 CINCINNATI MILACRON

  • Rochester, Michigan, United States
  • Jan 30th

People who viewed this item also vieved

USED 1.00 5C COLLET , WITH INTERNAL THREADS

USED 1.00 5C COLLET , WITH INTERNAL THREADS

  • San Carlos, California, United States
  • Mar 1st
USED 15/16 FOWLER 5C COLLET , WITH INTERNAL THREADS

USED 15/16 FOWLER 5C COLLET , WITH INTERNAL THREADS

  • San Carlos, California, United States
  • Mar 1st
Set of 6 TSD /Univ Engr Metric Collets 16mm to 25mm NEW

Set of 6 TSD /Univ Engr Metric Collets 16mm to 25mm NEW

  • Marion, Massachusetts, United States
  • Mar 2nd
Side grip clamps & pliers. Lot of 13.

Side grip clamps & pliers. Lot of 13.

  • Union, Missouri, United States
  • Mar 6th
5" ROUND MAGNETIC CHUCK "FINE POLE" *

5" ROUND MAGNETIC CHUCK "FINE POLE" *

  • Edison, New Jersey, United States
  • Mar 7th
4" Westcott 3 Jaw Chuck, Plain Back - #6304

4" Westcott 3 Jaw Chuck, Plain Back - #6304

  • Rocky Point, New York, United States
  • Mar 7th
Bison Chuck 6-1/4" No Reserve!

Bison Chuck 6-1/4" No Reserve!

  • Phoenix, Arizona, United States
  • Mar 7th
Lot of 3 Ken Forging 8" Strap Clamp Hold Down Goose Neck - No. 942 - USA

Lot of 3 Ken Forging 8" Strap Clamp Hold Down Goose Neck - No. 942 - USA

  • North Hatfield, Massachusetts, United States
  • Mar 7th
Lot Of 2 New!! Iron Base Push Pull Toggle Clamp 227Kg 500 Lbs

Lot Of 2 New!! Iron Base Push Pull Toggle Clamp 227Kg 500 Lbs

  • San Bernardino, California, United States
  • Mar 7th
KURT D60-4 SWIVEL BASE FOR 6" ANGLOCK VISES - D60, D675, D688

KURT D60-4 SWIVEL BASE FOR 6" ANGLOCK VISES - D60, D675, D688

  • Covina, California, United States
  • Mar 7th
Wilton MACHINIST MILL LATHE Tilting Rotating Vintage Bench Vise 4" Jaw CLEAN!

Wilton MACHINIST MILL LATHE Tilting Rotating Vintage Bench Vise 4" Jaw CLEAN!

  • Westland, Michigan, United States
  • Mar 7th
COLUMBIAN BENCH VISE SWIVEL BASE #D44 M2 4" USA

COLUMBIAN BENCH VISE SWIVEL BASE #D44 M2 4" USA

  • Orland Park, Illinois, United States
  • Mar 7th
ROYAL PRODUCTS Morse Taper 3 3MT Live Center Point MADE IN USA

ROYAL PRODUCTS Morse Taper 3 3MT Live Center Point MADE IN USA

  • Millbrae, California, United States
  • Mar 27th
NEW UNUSED MT2 CUP CENTER WORK HOLDER TOOL 4 WOOD METAL LATHE MORSE TAPER 2

NEW UNUSED MT2 CUP CENTER WORK HOLDER TOOL 4 WOOD METAL LATHE MORSE TAPER 2

  • Danville, New Hampshire, United States
  • Mar 28th
MT2 MT3 HEADSTOCK SPINDLE SLEEVE ARBOR MT2 DEAD CENTER LATHE MACHINIST TOOL LOT

MT2 MT3 HEADSTOCK SPINDLE SLEEVE ARBOR MT2 DEAD CENTER LATHE MACHINIST TOOL LOT

  • Danville, New Hampshire, United States
  • Mar 28th
Magnetic Lifter 1000 KG - 2200 LBS Hoist Magnets - Steel Lifting PML-10 - Crane

Magnetic Lifter 1000 KG - 2200 LBS Hoist Magnets - Steel Lifting PML-10 - Crane

  • Seattle, Washington, United States
  • May 24th
Eriez RPL-22 Lifting Magnet. Industrial Magnet 2200 lb Capacity

Eriez RPL-22 Lifting Magnet. Industrial Magnet 2200 lb Capacity

  • Colfax, North Carolina, United States
  • May 24th
SMW SLK-314 SELF CENTERING 30-145mm STEADY REST CNC LATHE WORKHOLDING

SMW SLK-314 SELF CENTERING 30-145mm STEADY REST CNC LATHE WORKHOLDING

  • Buffalo, New York, United States
  • May 24th
4" rotary table combo

4" rotary table combo

  • Norcross, Georgia, United States
  • May 29th
Yuasa CNC Rotary Table / Indexer CPDX-6 With UDNC-MY53 Control

Yuasa CNC Rotary Table / Indexer CPDX-6 With UDNC-MY53 Control

  • Lake Saint Louis, Missouri, United States
  • May 29th
KITAGAWA ROTARY 5C INDEXER TC100-33 MODEL 2018

KITAGAWA ROTARY 5C INDEXER TC100-33 MODEL 2018

  • Santa Clarita, California, United States
  • May 29th
V-Block; Brown & Sharpe # 750-B (CTAM 9471)

V-Block; Brown & Sharpe # 750-B (CTAM 9471)

  • Sicklerville, New Jersey, United States
  • May 29th
Tietzmann Eng. Co. - Machinist Step Blocks Set - 22 Piece with Tray

Tietzmann Eng. Co. - Machinist Step Blocks Set - 22 Piece with Tray

  • Linden, New Jersey, United States
  • May 29th
MCH 1/2 Precision parellel set 4 matched pairs

MCH 1/2 Precision parellel set 4 matched pairs

  • Katy, Texas, United States
  • May 29th
14 Pc. Techniks CAT 40 ER16-2.76" CNC Collet Chucks Kit-10 Pcs.Collet Set,Wrench

14 Pc. Techniks CAT 40 ER16-2.76" CNC Collet Chucks Kit-10 Pcs.Collet Set,Wrench

  • Hamden, Connecticut, United States
  • Jun 3rd
3 Pc. Techniks CAT 40 ER 16-2.76" 25K RPM Balance CNC Mill Collet Chucks

3 Pc. Techniks CAT 40 ER 16-2.76" 25K RPM Balance CNC Mill Collet Chucks

  • Hamden, Connecticut, United States
  • Jun 3rd
42 Pc. Techniks CAT 40 ER 16 & ER 32 25K RPM Balance CNC Mill Collet Chucks Kit

42 Pc. Techniks CAT 40 ER 16 & ER 32 25K RPM Balance CNC Mill Collet Chucks Kit

  • Hamden, Connecticut, United States
  • Jun 3rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies