RSI U4 Unwinder, 800193, RSI, Roll Systems, Lasermax Roll Systems, US $2,995.00 – Picture 0

RSI U4 Unwinder, 800193, RSI, Roll Systems, Lasermax Roll Systems, US $2,995.00 – Picture 1

Rsi U4 Unwinder, 800193, Rsi, Roll Systems, Lasermax Roll Systems

US $2,995.00

Irving, Texas, United States
Jan 30th

Open on mobile:
QR code

Lasermax Roll RS Unwinder (U4) - 5 Unit Available Items are surplus inventory for us - unable to use in our current print environment. Minor to moderate scratches & dents from normal operation. Unwinders have been inspected and passed basic power up operational testing. Operator, Service Manuals & 6'' Chucks are included with each unwinder (3'' and/or 5'' Chuck Sets are available upon request) Please contact directly with any questions - 972.793.0709 (Josh) Theory of Operation The Printer Unwinder U4 Model 800193 loads, unwinds and feeds large rolls of paper at low tension into high-speed printers. It provides reliable, smooth operation when feeding printers that start and stop instantaneously, but run at a steady speed during normal operation. Simple chucks that spin freely hold rolls. The rolls are surface-driven by belts, thus needing only a relatively low power drive motor and ordinary electrical power. Physical: Height (empty): 56.25''] Length (loaded with indeed): 84'' Width: 39'' Weight (empty): 960 lbs Chuck Sizes: 3, 5, and 6'' Environmental: Temperature: 72° F ±4°/22° C ±2° (recommended) - 60° F/15° C minimum - 80° F/26° C maximum Humidity: 40 - 60 % RH - non-condensing (recommended) Heat Output: 1632 BTU/hour Acoustics: Meets 90 dbA noise exposure limit (85 dbA or less typical) Power: 100 - 120 VAC 50/60 Hz, 6A or 220 - 240 VAC 50/60 Hz, 4A Roll Size: : Maximum Diameter: 50 inches (1270 mm) Minimum Width: 7 inches (178 mm) Maximum Width: 21 inches (533 mm) Maximum Roll Weight: 1500 pounds (680 kg) Paper Basis Weights: 16# to 42# bond (60 to 160 gsm) Core Sizes (options): 3, 5 and 6 inches (70, 150, and 200 mm)

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Item has minor scratches and dents. All parts are included and item is complete but untested. Operational testing and verification can be achieved if requested. 6'' Chucks are included with unwinders (3'' and/or 5'' available upon request).”