screw on feet for sale, brand-new and used.

Beverage Tubing 3/16" - 50' Free Screw Clamps, Kegerator, Draft Beer, Homebrew

Beverage Tubing 3/16" - 20' Free Screw Clamps, Kegerator, Draft Beer, Homebrew

Beverage Tubing 3/16" - 25' Free Screw Clamps, Kegerator, Draft Beer, Homebrew

Beverage Tubing 3/16" - 15' Free Screw Clamps, Kegerator, Draft Beer, Homebrew

Beverage Tubing 3/16" - 10' Free Screw Clamps, Kegerator, Draft Beer, Homebrew

Beverage Tubing 3/16" - 100' Free Screw Clamps, Kegerator, Draft Beer, Homebrew

** This Has Been Opened & Out Of The Box For Sale Purposes Only** The VH1651 is a 16 port active video hubs with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.

National Instruments (NI) SCB-68 Shielded Connector Block. Part # 182469-01, representative unit shown in photos (one of the units available- all in nearly identical condition, all have same part # as unit shown in photos). The units are in good working condition.

var loadingImages = new Array();function autoSizeImage(src, tagName, maxSize) {if (document.images){if (loadingImages[src.toString().toLowerCase()] == null) {loadingImages[src.toString().toLowerCase()] = new Image(); loadingImages[src.toString().toLowerCase()].src = src;} if((loadingImages[src.toString().toLowerCase()].width maxSize)){if (aspectRatio > 1.0) {aspect

This unit #868 in the Greenlee Tool Company's product line of screw anchor expanders is sized 1/4-20 and contains an instruction sheet with specifications for this model and other expanders in the series (which are not included with this listing). The adjustment of the length of one piece sliding in its channel of another changes its length between 2" and 2.25" inches. The expander has a diameter of approximately 1" inch.

 

KegWorks Air Line Jumper 5' with Screw Clamps

THK

Set of 24 Rubber Bumper Feet 1-1/4" * 1-1/4" + screws & metal washers built-in Package Included: (24) Rubber Feet (24) Screws The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. Can be used on several different applications as well. Specs: Height: 1-1/4" Diameter: 1-1/4" Recessed Hole Opening: 3/8" Screw Hole Diameter: 1/4"

Set of 16 Rubber Bumper Feet 1-1/4" * 1-1/4" + screws & metal washers built-in Package Included: (16) Rubber Feet (16) Screws The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. Can be used on several different applications as well. Specs: Height: 1-1/4" Diameter: 1-1/4" Recessed Hole Opening: 3/8" Screw Hole Diameter: 1/4"

Set of 12 Rubber Bumper Feet 1-1/4" * 1-1/4" + screws & metal washers built-in Package Included: (12) Rubber Feet (12) Screws The integral metal washer in the mounting hole helps prevent mounting screw "break-through" and adds overall durability. Can be used on several different applications as well. Specs: Height: 1-1/4" Diameter: 1-1/4" Recessed Hole Opening: 3/8" Screw Hole Diameter: 1/4"

Used- B.V. Nauta Mi