sealed ball bearings for sale, brand-new and used.

Bullnose Live Center for UNIMAT 3 Lathes - from LatheCity Purpose of that tool Live center for model work. In c

Ametek Lamb 119432-13 Vacuum Blower Motor Tennant 398520 5680 5700 7300 Scrubber LAST ONE!!!! IN STOCK, Ships immediately!!! This is the CHEAPEST price ANYWHERE on a genuine part.

Impeller material Fibreglass-reinforced plastic (PA) Mass 0.390 kg Dimensions 119 x 119 x 38 mm Housing material Die-cast aluminium Direction of air flow Inlet over bars Direction of rotation Clockwise, looking at rotor Bearing Ball bearings Lifetime L10 at 40 °C 65000 h Lifetime L10 at maxim

UP TO 2 NEW THK 30MM FLANGED LINEAR BALL BEARINGS LMK30UU This is a Fixed Auction for up to 2 New 30MM LMK30UU Flanged Linear Flange Bearings. PLEASE NOTE -- Each Bid is for ONE Bearing Steel Flanged Linear Bearing: Steel outer case with internal re-circulating balls in a plastic cage OD measures - 45MM x 64MM Long - sealed both sides. I will fully guarantee this bearing.

UP TO 8 NEW THK 40MM LINEAR BALL BEARINGS LM 40UU This is a Fixed Auction for up to 8 New LM 40UU Linear Bearings. PLEASE NOTE -- Each Bid is for ONE Bearing A linear-motion system, Linear Bush type LM, incorporating an LM shaft with a plain exterior, provides limitless linear motion. As the load-bearing balls are in point-contact with the LM shaft, the permissible load level is low, but there is littl

Rotary Rate Table Dividing Head Gyro Turntable Navy AA GAGE ULTRARON A-G DAVIS You are bidding on a Rotary Rate Table Dividing Head Gyro Turntable Navy AA Gauge ULTRARON

This is a used Cascade Fire Equipment top mount skid.... replacement cost currently $19,427.00... 300 gallons water, foam cell with Foam Pro eductor...

THIS SALE IS FOR A BRAND NEW FACTORY SEALED BOX, NEVER USED, NEVER OPENED, GENUINE A.O. SMITH, 1/3HP 208-230VAC@2.1AMPS(MAX), 1075RPM/3SPEED, FRAME=F48Y, SHAFT=0.500X6.5 BEARINGS=SLEEVE, =FD1036. This item qualifies for eBay Fast N Free - 1 day handling and free domestic shipping with Fedex Ground/Home OR USPS GROUND, UPS GROUND OR OTHER TRACKABLE CARRIER to the lower 48 USA.

Up for sale is a Brand New Goulds WS3012D4 Submersible Sewage Pump 3 HP 230 Volts 1-1/2 HP 230 Volts 1750 RPM 1 Phase 7.00 Impeller 21.5 Max Amps Up for sale is the Goulds WS_D4 series Submersible Sewage Pump. All items included in this listing are brand new. Please refer to the included section in this listing.

6304-2RS Sealed Ball Bearings 20mm x 52mm x 15mm Lot of 10 Bearings 6304-2RS Sealed Ball Bearings, the inner diameter is 20mm, outer diameter is 52mm and the width is 15mm, B

Pack of 5 Bearings 6205-2RS Forklifts Rubber Sealed Ball Bearings You are bidding on a Quality set of 5 6205-2RS Ball Bearings, Set Contains 5 Bearings, bearings has rubber seals to protect the bearings from dust or any possible contamination, also bearings are pre-lubricated with grease. Item: Forklifts Bearings Seals: bearings has rubber seals Quantity: 5 Pcs.

R14ZZ Sealed Ball Bearings 7/8" x 1 7/8" x 1/2" Lot of 10 Bearings

6202-2RS Sealed Ball Bearings 15mm x 35mm x 11mm 10 Bearings 6202-2RS Sealed Ball Bearings, inner diameter is 15mm, outer

DUMORE SERIES 28 DRILL-N-TAP DRILL HEAD Includes the Drill Head and column Tested and working As Pictured Please contact me for shipping Dumore Series 28 automatic feed drills and tappers, or self feed drills and tapping units, are cabable of both drilling and tapping. The motor automatically reverses for withdrawal after tapping. No mechanical parts – gears, clutches or lead screws – are required, eliminating the major cause of problems in ordinary tapping machines.

10" diameter wheel is good; 12" is better but 14" is The Best and a must for hollow grinding! Knife Making: 14" x 2" a True Rubber Belt Sander Contact Wheel with 3/4"

Knife Making: 14" x 2" a True Rubber Belt Sander Contact Wheel with 3/4" ID Bearings.

PRECISION 5MT 0.000197" LATHE LIVE CENTER FOUR BALL BEARING FOR CNC LATHE NEW BRAND NEW! GREAT PRICE! SUPER NICE!!