shaper spindle for sale, brand-new and used.

Cantek SS512TB 7.5HP Tilting Spindle Shaper --- Call for Sales & Special Pricing: 239-947-0348 If you need a tilting spindle shaper that is the best value for your money, the Cantek SS512TB should be your only choice. The Cantek SS512TB model boasts a tilting spindle which can move from -5 degrees to 45 degrees. Its motor power is 7.5 HP to provide you optimum spindle power.

Cantek SS512CB 7.5 HP Spindle Shaper --- Call for Sales & Special Pricing: 239-947-0348 Using the Cantek SS512CB to shape your materials or workpieces is guaranteed to provide you with the best results. This spindle shaper has a motor power of 7.5 HP to produce unrivalled shaper power. Its non-tilt spindle is extremely strong, electronically balanced and runs in precision bearings to provide you with vibration-free cutting.

Here is a nice vintage wood shaper. This tool is cast iron and well made. It is the bench model mounted on a Delta steel stand which has the retractable casters which makes it easy to move.

Craftsman 1/4" tongue and grooved set for shaper with 1/2" spindle.This is new old stock.

For sale is a new 1" spindle from A&E Precision Tool. It is meant for a Delta HD shaper only. 43-372, 43-373, 43-375, 43-379, 43

3/4" SHAPER SPINDLE FOR ROCKWELL / DELTA HEAVY DUTY Brand new

GENUINE DELTA 43-821 EXTRA LONG 3/4" SHAPER SPINDLE CARTRIDGE ASSEMBLY This is a sweet Genuine Delta 43-821 Extra Long 3/4" Spindle Cartridge Assembly with 2 speed Spindle Pulley for clockwise and counter clockwise operation. Provides 4 3/8" capacity under the nut for use with wide cutters and rub collars for fluting and reeding. For model 43-370, 43-375, 43-379, 43-372, 43-373, 43-374

ACCURA 02344S 5 HP SUPER DUTY 1-1/4" SLIDING TABLE SPINDLE SHAPER This is a MONSTER Machine! Includes 3/4" Spindle 35" x 28" Table Sliding Table 13-1/4" x 35-1/2" Table travels 21-7/8" 5-1/8" Capacity under the nut on 1-1/4" spindle 4 Speeds 3,600, 5,100, 8,000, 10,000 RPM 5-7/8" Max Cutter Diameter Sindle Trav

ACCURA 02344 5 HP SUPER DUTY 1-1/4" SPINDLE SHAPER This is a MONSTER Machine! Includes 3/4" Spindle 35" x 28" Table 5-1/8" Capacity under the nut on 1-1/4" spindle 4 Speeds 3,600, 5,100, 8,000, 10,000 RPM 5-7/8" Max Cutter Diameter Sindle Travel 3-2/4" Includes Cast Iron Miter Gauge and Hold Downs Micrometer Adjustable Fence 4" Dust Chute BRAND NEW IN CRATE Please contact us for freight quote or pick up at out

YOU ARE BIDDING ON ONE SET OF KNIVES ONLY Grizzly G2625 3-Inch Casement Moulding Head Knife A) Grizzly G2625 3-Inch Casement Moulding Head Knife TWO PAIR AVAILABLE -------------------------------------------------------------------------------------------- if interested in the others below ask for an invoice and write the amount you are offering for them. use the ask the buyer a question format.

1-1/2 HP FROM ACCURA WOOD SHAPER-NEW TAKE OFF This motor came from a shaper that we sold to the Amish. They run their machines on a line shaft or with air or hydraulic motors. This allows us the opportunity to sell the motors for replacements to people who need to upgrade or replace a motor on smaller shapers.

This is a completely refurbished delta light duty shaper assembly. It includes the spindle bearing cartridge, the housing, the height adjuster lever, the pulley, and the locking assembly. The bearings have been professionally replaced and it has been treated with penetrating oil to ensure that it will not rust in transit.

Lot of 5 shaper cutters. These may be new as they certainly look that way. If not they are super nice used!

Lot of 5 shaper cutters. These may be new as they certainly look that way. If not they are super nice used!

Lot of 4 shaper cutters. These may be new as they certainly look that way. If not they are super nice used!

Lo

Used Ekstrom 162 shaper, 8500 rpm, 5hp, 1630lbs. No detachable spindle, all you get is what the picture shows. Runs nice.

Delta Mdl.#RS-15 Shaper 7.5 hp., 220/440 Volt, 3 ph. 1" arbor Diameter FEEDER IS NOT INCLUDED BUT AVAILABLE AT ADDITIONAL COST. LMK AND WE'LL LIST FOR YOUR PURCHASE.

Powermatic Shaper Model PH-3. Serial # 89037035 This machine is in an old woodworking manufacturing facility that we purchased. We have no use for woodworking machinery, as we purchased just for the warehouse space.

This is a hardly used shaper came out of a small garage. It comes with 3 cutters and all of the spacers. I am missing the disk that goes in the table around the cutter but I can make one out of aluminum on my lathe.