swing bolt for sale, brand-new and used.

Double-Acting push/pull hydraulic Threaded-Body Cylinder with plunger head Bolt Hydraulic work supports are used to provide a self-adjusting rest for the workpiece during the machining operations. They compensate the work piece surface irregularities,also deflection and vibration under machining loads.&nb

Hilco 718 Series Filter Housing 1/3 hp Baldor Motor 115/230 V Single Phase - OBERDORFER PUMP The Hilco 718 Housing will house any HILCO 718 cartridge designed for 2” centerposts. This includes the PL pleated cellulose and PH pleated synthetic cartridges, and PD Water Absorbing Cartridge. These swing bolt housings permit full-flow or off-line filtration of fluids at working pressures to 150 PSI and flow rates to 25 GPM.

Home | All Listings | About Us |

Shoulder screws are one-piece screws with a cylindrical shoulder under the head that serves as a bearing or spacer. Used for a wide range of punch and die operations, such as the location and retention of stripper plates, and they also act as a guide in blanking and forming presses. You'll find them used as bearing pins for swing arms, links and levers; as shaft for cam rolls and other rotating parts; as pivots; and as stud bolts.

LISTING IS FOR A NEW PHASE II QUICK CHANGE TOOL POST

ESL5 ESL5 Features: Replaces most mechanical combination locks. Easy installation and operation.

Swing bolt safe keypad

Up for auction Is a new Fort Knox Pistol Case Safe. This is brand new but was only opened to verify the contents. HERE ARE SOME SPECS.

Steel or Aluminum Frame Mortise Hookbolt Locksets for Store Front Doors The storefront door mortise hookbolt lockset contains everything you need in one kit. The hookbolt mortise lock body is designed for swing or sliding aluminum framed doors. A huge, five-ply, laminated steel bolt that has concealed hardened steel pin provides maximum security.

Steel or Aluminum Frame Mortise Hookbolt Locksets for Store Front Doors The storefront door mortise hookbolt lockset contains everything you need in one kit. The hookbolt mortise lock body is designed for swing or sliding aluminum framed doors. A huge, five-ply, laminated steel bolt that has concealed hardened steel pin provides maximum security.

PHASE II *** Wedge Type Quick Change Tool Post*** Through Coolant: NoTool Post Height: 5-1/8" Lathe Swing: 13-18" Series: CXAType: Wedge TypeBolt Hole Diameter: 3/4"

THE REAL THING, NOT A KNOCK-OFF. KDK SERIES 200 TOOLPOST WITH MODEL 206 4-POSITION TOOLHOLDER. > This is the largest toolpost offered by KDK (as of 2008).

PHASE II Type: Quick Change Tool Post - Wedge TypeSeries: 300 Lathe Swing: 13 to 18 Through Coolant: No Base Width: 3-1/2" Tool Post Height: 5-1/8" Centerline to Handle Edge: 7-7/8"

Quick Change Wedge Type Lathe Tool Post Model Number: 250-444 Series CA / 400

NEW KDK STYLE 150 SERIES 6-PIECE QUICK CHANGE TOOL POST & HOLDER SET -----------------