swing bolt for sale, brand-new and used.

This LaGard 33E swing bolt lock was removed from a closing bank branch. Comes with all mounting screws, battery and combo changing instructions. Should be installed by person with electronic lock knowledge.

2007 Haas SL-10 CNC Lathe w/ Bar Feed, Tailstock, & Presetter Stock Number: 3362 Haas SL-10 Age: 2007 Condition: Great CNC Lathe; 14" x 14" (356 x 356 mm) max capacity, 1.75" (44 mm) bar, 16.25" (413 mm) swing, 15 hp (11.2 kW) vector drive, 6000 rpm, A2-5 spindle, 6.5" (165 mm) chuck, 12-station bolt-on turret, 15" color LCD monitor, memory lock keyswitch, USB po

BOXED 290 PCS PER CARTON 3/8-16 X 5.4" OVERALL LENGTH (3" OF THREAD)(.140 GAP TO ADD CHAIN)

ELECTRIC MOTION CO., INC EM4DB-02 1/2"-5/8" Ground Rod Clamp GRD ROD (R) Description: - This ground rod clamp can be used to connect #6 or $10 AWG ground wires to 1/2" and 5/8" ground rods of all styles - Front bar is hooked and hinged to swing open - Clamp can be applied on an already existing ground rod (power ground) under a previously applied power system ground wire - 1/2" hex bolts are designed to be tightened with a socket wrench.

HHIP 3900-5425 6 Piece KDK Style-100 Quick Change Tool Post and Holder Set

HHIP 3900-5426 KDK Style-150 Quick Change Tool Post and Holder Set, 6 Piece

Mighty Mule Bulldog Pedestrian Gate Lock (FM145)

Up for auction is a 9" South Bend metal lathe that is in great condition but needs a new motor. The one on it is too low of a horsepower (it's 1/8 hp) and is nearly burned out. It can't turn the lathe and starts smoking.

TDP-0 TABLET PRESS MACHINE TDP-0 TABLET PRESS MACHINE TDP-0 Single Punch Tablet Press, which can press the powder material into tablet and be widely used in pharmaceutical factory, chemical factory, hospital, R&D institution, laboratory. It is suitable for small batch production. This machine is with good performance, strong suitability, simple operation, easily repairs, small cubage and light.

This original sheet metal Stover gas tank is 20" long x 6" wide x 2-1/2" tall. It comes with the gas pick up tube, filler neck with swing cover. The mounting brackets have bolt holes about 7-1/2" center to center.

???? 1 Stainless Steel Bag Filter Note: If you are International customer out of Canada or USA, please contact with us for consulting the detailed shipping information. Before pickup, ple

Title of your page goes here 1941 MACHINE SHOP TOOLS LATHE MILL JIGS FIXTURES FOUNDRY GEAR CUTTING      This is a 568 page, 5 3/4” x 8 1/2”, hardcover book titled The New Encyclopedia of Machine Shop Practice.   The book was edited by George W. Barnwell Professor of Production Practice Stevens Institute of Technology and was copyrighted and published in 1941.

Brand new in box program single or dual up to 9 users Swing bolt style

New York Supplies New York Supplies Dampening Needle Roller Bearing for Heidelberg K Offset (KOR KORA KORD 62 KORD 64 KORS)

New York Supplies New York Supplies Offset Printing Plates Developer

New York Supplies New York Supplies Blue Ink for Offset and Letterpress Printing