thermocouple mounting for sale, brand-new and used.

This is a National Instruments FieldPoint 8-Channel Thermocouple Input Module FP-TC-120 No. 184522B-01. This unit appears to be new with no box but I am unable to test.

Click Here. Double your traffic. Get Vendio Gallery - Now FREE!

This item does not come in the original package and does not come with mounting screws. The item was hooked up and tested. Note picture is a stock photo, this listing is for amplifier only

C12110 LFE Model 2012 Temperature Controller - 120VAC - For Type B Thermocouple - Powers up and responds to a heat source on a thermocouple as shown - Mounting bracket included - Terminals 6, 7 and 8 are for hot, neutral and ground, respectively. Terminal F is for the negative (red) thermocouple wire. Terminal H is for the other thermocouple wire.

Connector, Thermocouple, T Calibration, Mini-SMP, PCB / Vertical Mount (Lot/20) Omega #PCC-SMP-V-T The PCC connector from OMEGA is perfect for bringing thermocouple probes to printed circuit boards. The PCC is also available with an optional transistor retainer clip (not included in lot) ; the clip accepts TO-92 style transistors for cold junction temperature measurements at the transition from thermocouple alloy to copper wire.

Red LED 0-999°C Temperature Thermocouple Thermometer Panel Meter+1m Probe Sensor

Green LED 0-999°C Temperature Thermocouple Thermometer Temp Panel Meter Display

Red LED 0-999°C Temperature Thermocouple Thermometer Temp Panel Meter Display

Blue LED 0-999°C Temperature Thermocouple Thermometer Temp Panel Meter Display

General Description This temperature control displays both the setpoint and process temperature and uses the most mod

All solid state design High stability Wide temperature range Cold junction compensation

This listing is for a large set of Compact FieldPoint (cFP) hardware, including a 8 position backplane with DIN mounts, three (3) CPUs- each a cFP-2020, one with 256MB NI memory module as shown, two of the three each have two sets of screw terminals as shown (one in chassis and first on left outside of chassis). The chassis is loaded with various analog and digital modules as shown with screw terminals, including a thermocouple module with cFP-CB3 terminal.

Thermocouple, Heating Element, RDF Corp. P/N 3773-3B NSN: 6685007647120 Location:5C2 Cage Code: Part Number: Company Name: 02009

PID TEMPERATURE CONTROLLER INSTRUCTION MANUAL It's compatible with : Gongzheng Thunder-jet Litu Sky-color Xuli etc DX5 DX7 Solvent and UV Inkjet Printers . Caution This troller is intended to control equipment under normal operating conditions.

DataForth Linerarized Isolated Type K Thermocouple Input I/O Module Model: 8B47K-13 Input: -100 degrees C to +1250 degrees COutput: 0 V to +5 Volt New Old Stock, in plastic wrapper. One unit removed to make photos. Surface scratches to product label.