threaded pins for sale, brand-new and used.

THREADED TAPER DOWEL PIN #4 X 1 1/4" LONG LARGE END DIA 0.248 1/4-28 THREADS QTY 23 NEW OLD STOCK INVENTORY #52246

THREADED TAPER DOWEL PINS #4 X 2" LONG LARGE END DIA 0.248 1/4-28 THREADS LOT OF 25 NEW OLD STOCK INVENTORY #52248

THREADED TAPER DOWEL PIN #7 X 1 3/4" LONG LARGE END DIA 0.407 3/8-24 THREADS QTY 7 NEW OLD STOCK INVENTORY #52244

(19) THREADED TAPERED DOWEL PINS #3 X 3 1/4" LONG LARGE DIA END 0.217 10-32 THREADS NEW OLD STOCK INVENTORY #52227

Indeeco Heating Element&nb

YOU ARE BUYING A : LION WELDED HYDRAULIC CYLINDER MODEL # 644808 20WH08-112 ASAE 3000 PSI 2" BORE / 8" STOKE Double-acting, double-ported welded tie rods are perfect for industrial, agricultural and contractor applications. Features chrome rod, crown piston seals with wear ring, hallite rod seals, double lug base end, threaded rod end with ductile rod clevis and 3/4-16 ORB (SAE 8) ports inline with pins. 1in pin hole size.

The diode that is used in this laser module is brand new, and was not extracted from a Blu-ray burner sled, as is visible by its long, uncut pins. They are rated by the manufacturer for 170mW pulse, however they can be driven to provide approximately 150mW continuously (an additional heatsink may be required for prolonged operation of over 35 seconds at this power level).

The diode that is used in this laser module is brand new, and was not extracted from a DVD burner sled, as is visible by its long, uncut pins. It is rated by the manufacturer for 150mW CW and 400mW pulse, however it can be driven to provide very close to 400mW continuously (an additional heatsink may be required for prolonged operation of over 20 seconds at 500 milliamps+). This diode is identical to the LPC-815 diode that is frequently extracted by laser hobbyists from DVD-RW drives.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16", with knurled nuts, and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Now with Knurled nuts! Hi, up for sale is one lot of 5 sets of 1-1/8 inch O.D., aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16", and are very light weight, but strong.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These will fit small holed flanges, like Duct work Etc., and pipe up to 12" on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/4" to 1-1/16" , and are very light weight, but strong.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes fro1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and Knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. These have a 45 degree taper with 1/2"-13 removable threads, 3" long, and knurled nuts.

Hi, up for sale is 1 set of custom, aluminum, "2 hole" pins. These measue 1-5/8" O.D., and will fit holes from 1/2" to 1-9/16" and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

07 3011 3627 39B This item is surplus stock and is new in box. OD 1" ID 5/8" ID Length 1 3/16" Threaded ID 3/8" OAL 1 3/4" Please email any questions or requests for additional pictures before purchasing. International Buyers – Please Note: Import duties, taxes and charges are not included in the item price or shipping charges.