threaded pins for sale, brand-new and used.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong. The old, rusty, 3" pipe flange shows the 1" set being used, for demonstration.

Hi, up for sale is 1 set of standard sized, aluminum, "2 hole" pins. One pin has a level vial for easy vertical leveling, and comes with a 360° vial that just "snaps" in for easy replacement. These are also spot faced 15/16" I.D.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. Even 1/2" pipe has 5/8" holes, so these will fit 1/2" pipe up to 12" pipe on a class 150 flange, or up to 8" on a class 300 flange. These measue 1-1/8" O.D., and will fit holes from 1/2" to 1-1/16" , and are very light weight, but strong.

YOU ARE BIDDING ON 8 (3/4"INSIDE DIAMETER) SERRATED PRESS FIT BUSHINGS WITH AN OUTSIDE DIAMETER OF 1". TOTAL LENGTH IS 1" WITH 1/2" DEDICATED TO SERRATIONS. TOLERANCES ARE LESS THAN .001".

I have available a lot of 9) new-in-box double-threaded pins for indexable tooling, style NL34-L. Free shipping within the US; enter your country into the shipping calculator for international postage cost.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

Hi, up for sale is 1 set of small, aluminum, "2 hole" pins. These are turned, and tapered on the threads for EXTREME accuracy, and the threads are tapered on the end with the lathe, and are spot faced on the end for 3/4" decals, which are High Quality, and U.V resistant, polymer domed. These will ship in a 3X3X2 inch, tuck top box.

D38999/26KC98SN MIL-SPEC. CONNECTOR with contacts

MS3450L20-27S MIL-SPEC. CONNECTOR with contacts

You are bidding on a lot of (10) NEW ITT Schadow Pushbutton Switches: P/N 600783, Type NE15 T70, DPDT. Includes the power button cap as shown in the photo. These were made in West Germany, rating is 4A @ 250V.

FOR SALE, ONE GRAYHILL SERIES 71 ROTARY SELECTOR SWITCH WITH EIGHT (8) POLES AND SIX (6) POSITIONS. THE NUMBER OF POSITIONS CAN BE SET FROM 2 TO 6 BY INSERTING DOWEL PINS IN THE SUITABLE FRONT PLATE HOLES. TWO DOWEL PINS AND AN ADHESIVE METAL TAG TO KEEP THE PINS IN PLACE ARE INCLUDED.

Item Description: BradConnectivity / Molex Nano-Change® (M8) Single-Ended Cordset, 90° to Straight, Female to Pigtail, 3 Poles, 5.0m (16.40' ) Length Pins 1 (BRN), 3 (BLU) & 4 (BLK) Wired Condition: New in original package Specif

PRODUCT DESCRIPTIONLOCTITE® 2701 provides the following product characteristics:Technology AcrylicChemical Type Dimethacrylate esterAppearance (uncured) Green liquidLMSFluorescence Positive under UV lightLMSComponents One component - requires no mixingViscosity LowCure AnaerobicSecondary Cure ActivatorApplication ThreadlockingStrength HighLOCTITE® 2701 is designed for the permanent locking andsealing of threaded fasteners.

THREADED TAPERED DOWEL PINS #3 X 1 1/2"LARGE END DIA 0.217 10-32 THREADS STAINLESS STEELQTY 35NEW OLD STOCK INVENTORY #52177

External Retaining Ring, Stainless Steel, Inch, 3/4" Shaft Diameter, 0.042" Thick, Pack of 25 Useful in many machine assemblies, Retaining Rings provide an artificial shoulder for accurately locating, retaining or locking components in position, replacing nuts, threaded sleeves, cotter pins, rivets, machined shoulders and other bulkier fittings.The tapered design maintains circularity and pressure against grooves. They are axially applied and can be removed with Retaining Ring Pliers.

THREADED TAPER DOWEL PIN #1 X 1 1/2" LONG LARGE END DIA 0.172 8-32 THREADS QTY 49 NEW OLD STOCK INVENTORY #52264

THREADED TAPER DOWEL PIN #4 X 3/4" LONG LARGE END DIA 0.248 1/4-28 THREADS QTY 13 NEW OLD STOCK INVENTORY #52247